Providing 30.5TR Capacity Central AC System to Swamyvari temple in Srisaila Devasthanam, Srisailam (2nd call)

Supply, Installation and Commissioning of Double Skin Vertical custom Designed AHU. The panels made out of 45 +/- 2 mm thick fabricated out of pre coated 0.8mm thick GI on outer side and 0.6 mm thick ALUZINC / Equilent on inner sidewith PUF insulationdensity of 38+/-2 Kg/Cu.m. Theframework shall be ofinternally coved extruded aluminum minimum 3 mm thick and thermal breakhollow sections. suction side shall be with capule cut inlet member at the rearside of the unit,Pre filter section with high efficiency 20 micron filters, Coilsection with 6 row DX cooling coil with hydrophobic type protective coating asper the requirement. 18 G insulated SS 304 stainless steel drain pan, fan sectionwith 1 nos DIDW Limit Load centrifugal fan, IE2 motor, this shall comprise adigital temperature controller along with unit mounted operating switch etc. Makes: Systemair, Sagarair, Blubee

5.5 TR, 2200 CFM, 40 mm static,

8.5 TR. 3400 CFM. 40 mm static,

Supply, Installation of following capacity of air cooled refrigerant pre chargedcondensing unit equipped with Scroll Compressors suitable for R-410 eco friendlyrefrigerant,GalvanizedsteelConstructionfinished in polyester powder coat etcCondenser coil with copper tubes and aluminum fins. Coil should be coated withHydrophilic type coating propeller fans with IP55 motor, rust proof fan gaurd. Thisunit is equipped electronic protection controller having unique features to ensurethat system operates at optimum safety levels. electronic Pressure saftey switchsfor LP & HP These units will be inter connected with above AHU. To comply asper the enclsoed data sheet. all outdoors shall be mounted with necessaryvibration isolators / pads etc, Makes: Makes: Daikin, LG

5.5 TR Nominal capacity

8.5 TR Nominal capacity

Supply, Installation, Testing and commissioning of thermostatic expansion Valve with external equalisation for optimal refrigerant feed of suitable size. Makes: Sporlan/Danfoss

Supply, installation, testing and commissioning of appropriately sized service valves, Distributors, and holding plates catch all filters along with long neck flare nuts etc

Supply, installation, testing and commissioning of Refrigerant copper piping Liquid line with 13 mm thick Nitrile rubber insulation finished with 3 coats of wether protect UV resistenet property to inter connect with the Air handling unit to the condensing units

Supply, installation, testing and commissioning of Refrigerant copper piping Suction line with 13 mm thick Nitrile rubber insulation finished with 3 coats of wether protect UV resistenet property to inter connect with the Air handling unit to the condensing units

Supply, Installation, testing & Commissioning of the drain line with CPVC Drain oiping and fittings, like Elbow's, T - Joints, Couplings along with 6mm thick closed cell nitrile rubber insulation

Supply and charging of R-410 Eco friendly Refrigerant for Above units

Supply and Installation of MS structural works including anchor bolts wherevernecessary (Hilti / Equilent make) one coat of red oxide and two coats of approvedcolor enamel paint for support works for AHUs, out door units, ducts etc.

Supply, installation, testing andcommissioning of IP 54 electrical panel consists of 5 nos starters for above Air handling unit and condensing unit, along with multifunction meter, remote operating controller, Incoming MCCB & 5 nos VFDs forthe AHUs etc. Makes: Danfoss/Delta

Supply, laying and commissioning of 4 core 6 Sqmm cable, 1.1 KVgrade XLPE/PVC insulated armoured Aluminium/Copper conductor cable, neatlydressed & clamped to the supports. Cable between DOL Stater panel to Airhandling unit for Power supply

Supply, laying and commissioning of 4 core 2.5 Sqmm cable, 1.1 Kvgrade XLPE/PVC insulated armoured Aluminium/Copper conductor cable, neatly dressed & clamped to the supports. Cable between Indoor unit and Out door for communication

Supply, laying and commissioning of 7 core 1.5 Sqmm cable, 1.1 Kvgrade XLPE/PVC insulated armoured Aluminium/Copper conductor cable, neatlydressed & clamped to the supports. Cable between DOL Stater panel toCondensing unit for Power supply

Supply, Installation, testing and Commissioning of 22 Gauge GSS ducting usingclass VIII sheets / coil, galvanised hardware & supports, silicon sealant at alljoints, TDF flanges for all the joints, minimum 5mm thick neoprene rubbergasket Required fittings and Accessories etc. This includes 25 mm thick internalinsulation by using class O nitiril rubber

Supply, Installation, testing and commissioning of Aluminium perforated Capsulegrills required supports and fittings etc

Supply of Extruded aluminium construction Drum Jet Diffuser with fully adjustable Drum up & down and adjustable vanes left & right direction with opposed blade 5 sets 30,212 1,51,060 extruded aluminium black anodized damper. Makes: Systemair/MJS/BACE

Supply, Installation, on, testing and Commissioning of trnafer boxes for Supply air required supports and accessories etc. Makes: MJS/Systemair/Sagarair

Supply and fixing of Alluminium Jet Nozzle (Double Skin Eye Ball Typе) 315mm Dia Nozzle Rotation in all Direction up to 30 Degree Horizontal & Verticle Direction. This includes required fitiing and accessories etc. Makes: Systemair/MJS/BACE

Supply and fixing of suitable size canvas connections at duct out lets of the packaged unit including access port for temperatures measurement.

Supply, fixing, testing and commissioning of GI low leakage aerofoil design volume20 control dampers with 18 Gauge Frame and Gauge blade and suitable formanual operation rewuired supports and accessories etc

Supply and Installation of 10 mm thick Accoustic insulation for the initial portion of supply air ducting. Material of construction shall be fibre-free elastomeric nitrile rubber foam with open cell structure by using of Suitable adhesive etc.