Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-Finance | ₹3.5 L | 1 | Accepted-Finance L1 |
| 2 | 2₹3.6 L+₹11,656 (3.34%)Rejected-Finance | ₹3.6 L+₹11,656 (3.34%) | 2 | Rejected-Finance L2 |
| 3 | 3₹3.7 L+₹15,872 (4.54%)Rejected-Finance VILL LANGWAN PO LAMBLOO TESHIL DISTT HAMIRPUR 177029 | HAMIRPUR | HIMACHAL PRADESH | 177029 | ₹3.7 L+₹15,872 (4.54%) | 3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Madan Lal L3 | Jitender Singh L2 | Sh.Rajesh Mahajan L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. ( for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/ hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil / unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge | 218.24 | Cum | 450 ₹98,208 | 425 ₹92,752 | 400 ₹87,296 Lowest |
| 2.00Providing circumferential butt welded joints by electrical arc welding to the varIous dia GMS / MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | ||||||
| 2.01 | MSERW R/main 300mm dia thickness 4.80 mm | 66 | P/Joint | 2,340 ₹1,54,440 | 2,350 ₹1,55,100 | 2,300 ₹1,51,800 Lowest |
| 2.02 | MSERW pipe 250mm dia thickness 4.80mm | 58 | P/Joint | 1,940 ₹1,12,520 | 1,950 ₹1,13,100 | 1,900 ₹1,10,200 Lowest |
Tender Value
₹3.4 L
EMD Value
₹6,700
Closing Date
25 Jul 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Bilaspur
Restoration of rain damages of LWSS New Bilaspur Town in Tehsil Sadar District Bilaspur (SH Repair of leakage points of various dia pipe line at various RDs at various location by butt welding under Section NBT).
2026_HPIPH_139032_2
BLP-BLP-0736-NIT No. 5628-5729 Dated 14/07/2026
Open Tender
Civil Works
Item Rate
60 days
Sub Division Bilaspur Section NBT
Please refer Tender documents.
4 documents required · 4 mandatory
₹350
₹6,700
12 Aug 2026
16 Jul 2026
25 Jul 2026
16 Jul 2026
25 Jul 2026
16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. ( for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/ hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil / unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge | 218.24 | Cum | - | - |
| 2Providing circumferential butt welded joints by electrical arc welding to the varIous dia GMS / MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||
| 2.01 | MSERW R/main 300mm dia thickness 4.80 mm | 66 | P/Joint | - | - |
| 2.02 | MSERW pipe 250mm dia thickness 4.80mm | 58 | P/Joint | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.31 MB
PWD6.pdf
Tender Documents • 0.40 MB
PWD8.pdf
Tender Documents • 1.32 MB
TC.pdf
Tender Documents • 0.17 MB
BOQ_205940.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .