Renovation/Repair of Toilet in Indira Market (1st floor) near to BSNL office, Mandi in W.No.10

Amount

Dismantling tiled floors CC laid in mortar upto floor two level including stacking of servicable materials and disposal of un-serviceable materials Municipality designated area (wooden/concrete joists to be measured and paid for separately). For thickness of tiles 25mm .

Stone slab/flagged/Granite floors demolition work including carriage of dismentalled materials upto Municipal C&D waste site.

Wall tiles demolition work including carriage of dismentalled materials upto Municipal C&D waste site.

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 meters lead .un-reinforced cement concrete more than 15cm.thickness including carriage of dismentalled materials upto Municipal C&D waste site.

Dismantling doors, windows and clerestory windows,ventilators etc.(wood or steel) shutters including chowkhats,architraves,hold fasts and other attachments etc.complete and stacking them within all lead upto Municipal Store as directed by the Engineer-in-charge

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying granite stone in flooring 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement : three sand) laid over and jointed with cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete: 20mm (Twenty millimetre) thick.

White glazed/Coloured tiles 8mm (Eight millimetre )thick (Kajaria make) in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand:4) graded stone aggregate 20mm nominal size) and curing complete excluding cost of form works in foundation & plinth

Providing and fixing anodised aluminium work for door,window, ventilators and partitions with extruded built up standard tubular and other ections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868.(Minimum anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips,or with expansion hold fasters including necessary filling up of gaps at junctions ,at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree,straight ,mitred and jointed techanically where ever required including cleast angle,aluminium,snap beading for glazinge/panelling C.P brass/stainless steel screws. All complete as per drawings/sketch and directions of Engineers-In -Charge.For doors window and ventilators and glazed partions frames.

Providing and fixing anodised aluminium work for shutters of doors windows & ventilatos includings including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid) for separately.

Providing and fixing 12mm thick (MDF) medium density fibreboard flat pressed three layer or graded wood particles board conforming to IS:12823 grade I type II in panelling fixed in aluminium doors,windows shutters and partition frames with CP brass/stainless steel screws etc. complete as per drawings/sketches and directions of Engineer-In-Charge.Prelaminated particle board with decorative lamination on both sides.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - Ceiling etc.

Painting two coats (excluding priming cost on new steel and other metal surfaces either enamel paint brushing to give an even shade including cleaning the surface of all dirt ,dust and other foreign matters : Enamel paint other than white

Providing and fixing 250x16mm anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete.

Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required shade and colour with screws etc. complete 150x10mm.

Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete 125mm.

Providing and fixing fly proof galvanised M.S wire gauge of IS gauge designation 140g with wire of dia 0.71mm to windows/ventilators and clearestory windows including 60x20mm beading of 2nd class deodar wood.

Providing and fixing plytheline - Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall including carriage of materials with in all leads, lifts and other incidentals.

Internal work: exposed on wall : 1216 (16mm O.D. pipe)

Internal work: exposed on wall :1620 (20mm O.D. pipe)

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals. : 110 mm X 90 mm. (finolex make)

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete : 150 mm nominal dia. (finolex make)

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete : 150 mm dia (finolex make)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. 150 mm dia (finolex make)

Providing and fixing PVC plain bends ISI marked including fixing with approved adhesive etc. complete.: 150 mm nominal dia. (finolex make)

Providing and fixing PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. 150 mm nominal dia. (finolex make)

Providing and fixing waste coupling 32mm C-230 A of 'ESS ESS' of equivalent or of superior quality.

Providing and fixing 32mm (Thirty two millimetre) dia lead waste pipe for wash basin or sink including brass check nut including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Bib cock 15mm (T-103 D) with wall flange from flow of 'ESS ESS' of equivalent or of superior quality.

Providing and fixing Pillar cock 15mm (T-113 swan Nock costed spout) of 'ESS ESS' of equivalent or of superior quality.

Providing and fixing PTMT urinal spreader of approved quality and colour

Providing and fixing CP angle cock of approved quality and colour: 15mm with flange

Providing and fixing Towel Ring of 'ESS ESS' of equivalent or of superior quality.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors .

15 mm nominal bore (Jindal make)

20 mm nominal bore (jindal make)

Providing and fixing vitreous china water closet squatting pan Indian Type -W.C. Pan) size 580mm of "Cera" or equivalent earth work, bed concrete foot rest and trap to be measured and paid for separately) Orissa pattern Cat No. 20042 (58x44) star white.

Providing and fixing C.P. brass flush pipe /spreaders for urinals with fitting such as unions,clamps etc.(all in C.P.Brass) including cutting holes and making good the same.

Providing and fixing vitreous china wash basin (Cera make) with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 630X450mm (Six Hundred Thirty into Four Hundred Fifty millimetre) complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin or sink complete recessed at the back for reception of pipes and fittings as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm sand cast iron grating for gully trap floor as nahni trap.

Providing and fixing 600x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.

Providing and fixing chromium plated brass soap dish with C.P Brass brackets fixed to wodden cleats with C.P Brass screws

Providing and fixing Division plate for urinal 600x300mm (six hundred into three hundred millimeter) vitreous china complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing white glazed fire clay stall urinal of 1150mm x500mm (Cera make) size as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

NAGENDER KUMAR

Prakash Chand