SPECIAL REPAIR TO BLDG NO P 13 P 14 P 15 LIVING ACCN OF NCC AND PROVN OF OUTDOOR GARDEN LIGHTS ALONGWITH CONNECTED ITEMS AT SOI AT HALDWANI UNDER GE RANIKHET

Amount

BOQ ( Sch A ) Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

All as per item No. 1 here in before but of any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in slab, floors, roof, landing, balconies supported on walls, beams and columns, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landings, balconies and finished rough surfaces of concrete flat complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

S & F for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with (annealed) not less than 0.90 mm dia wire complete all as specified and directed.

S & F for mild steel TMT bars ,5mm dia to 10mm dia as in stirrups, spacers, binders etc, cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with (annealed) not less than 0.90 mm dia wire complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over with and including cement mortar screed bed 15mm thick in CM 1:4, complete all as specified and directed.

M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over with and including cement screed bed 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing grinding and polishing complete all as specified and directed.

M&L for Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over with and including cement screed bed 10mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

All as per item ser No 18 here-in-before but in skirting/dado or verticle surfaces with and including back coat of screed bed or bedding layer of 10 mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

All as per item ser No 19 here-in-before but area of each tile exceeding 0.11sqm and not exceeding 0.18 sqm as in skirting/dado or verticle surfaces with and including back coat of screed bed or bedding layer of 10 mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with with and including back coat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match as in floor etc , complete all as specified and directed.

M&L for Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and white or coloured cement to match over with and including screed bed or bedding layer 10mm thick in CM 1:4 complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including connections and fittings, complete all as specified and as directed.

All as per Item No. 25 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

All as per Item No. 25 here–in–before, but for 25mm dia (Bore) complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with and including all GI fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No. 28 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

All as per Item No. 28 here–in–before, but for 25mm dia (Bore) complete all as specified and directed.

S & F in repair 15mm dia bib taps CP Brass with capstan head, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S & F in repair 15mm dia bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S & F in repair brass CP pillar taps fancy type for iron pipe of bore 15mm fancy type with capstan head complete all as specified and directed.

S & F in repair brass chromium plated basin Mixer valve hot and cold screwed down for iron pipe 15 mm bore complete all as specified and directed.

S & F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.

S & F in repair Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F Ball Valves Brass, 25mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S & F Ball Valves Brass, 20mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified

Supply & Fixing Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F15mm dia bib taps Sink Cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

Supply & Fixing glass shelf 450 x 125 x 6MM (with ABS Bracket) chromium plated bracket guard and SS railing complete all as specified and as directed

Supply & Fixing Cabinet Mirror of size 400 x 500 made out of 2mm thick acrylic sheet with internal shelves and openable shutters incl 10mm dia aluminium /brass CP rod complete all as specified and directed.

Supply & Fixing Soap Dish CP stainless steel complete all as specified & directed.

S & F toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

Supply & Fixing Peg Set of 6 with base plate stainless steel complete all as specified and directed.

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed.

Supply & Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

Supply & Fixing in repairs vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S & F in repairs Vitreous China wash downwater closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed.

S & F in repairs one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed.

Supply & fix Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE.

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3 including taking down unserviceable flushing cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S & F in repairs wash hand basin of vitreous china counter sunk size 450mm x 350mm x 150mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs stainless steel plate rack of stainless steel 1mm thick of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S & F in repairs stainless steel grating 100mm dia complete all as specified and directed.

S & F in repair Stainless Steel grating 125mm dia complete all as specified and directed.

S & F in repairs PVC Connections 15 mm dia with PTMT nuts of length 600mm long complete all as specified.

Dismantling of CI pipe 100mm/110mm dia jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

Dismantling of CI pipe 75mm dia jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc but except pipes complete all as specified and as directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc but except pipes complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

S & F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and directed.

S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

S & F CI spun pipe branch piece 75mm bore, single(eaqual or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed.

M&L for Extra over CI pipes fittings if lead joints is provided inlieu of cement joints for 100 bore pipe complete all as specified and as directed.

M&L for Extra over CI pipes fittings if lead joints is provided inlieu of cement joints for 75 bore pipe complete all as specified and as directed.

S & F CI spun floor tarps of size 75mm with grating including jointing to CI pipe with lead joint complete fixed in repair incl making joint water tight complete all as specified and as directed.

Supply & fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed to walls with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS square tube complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8 B.2.1 of SSR Part-II 2020 all as specified and directed.

S & F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F powder coated aluminium windows with side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate , MS expansion fastners , neoprene gasket ;4.80 mm tinted glass panes , Anodised handles 100 mm long (02 Nos for each shutter) , anodised peg stay 150 mm long, Anodised tower bolts 125 mm long (1 No for each shutter) complete all as specified . Section of anodised windows shall be of following sizes: Chawkat/Frame: 65 x 38 x 1.48 mm thick fixed with rawl plug and GI screws sizes of Shutter: 44.5 x 47.5 x 1.5 mm thick Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same shall be deemed to be included in the respective items.

S&Faluminium powder coated windows with side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate , MS expansion fastners , neoprene gasket ; stainless steel wiremesh 0.36mm nominal dia of wire and average width of aperture 1.40mm , Aluminium powder coated handles 100 mm long (02 Nos for each shutter) , Aluminium powder coated peg stay 150 mm long, Aluminium powder coated tower bolts 125 mm long ( 1 No for each shutter) complete all as specified . Section of aluminium powder coated windows shall be of following sizes:Chawkat/Frame: 65 x 38 x 1.48 mm thick fixed with rawl plug and GI screws & sizes of Shutter: 44.5 x 47.5 x 1.5 mm thick Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same shall be deemed to be included in the respective items.

Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified. (Note:- Glass pane and mesh will be measured and paid separately )

Supply and fixing powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed.

S & F sheet glass 4.8mm thick tinted glass and glazing in squares fixed to aluminium door/windows/vents complete all as specified and as directed.

S & F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

Supply & fixing Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No.92 herein before but without glazing bars complete all as specified and as directed.

Supply & fixing steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and as directed..

S & F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete.

S & F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and as directed.

S & F as in repair mild steel wire cloth, .45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed

S & F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed.

S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast including necessary form work complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified.

Supply & fixing 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply and fixing in repair 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved complete complete all as specified and directed.

Material & labour for stainless steel telescopic channel for drawers not less than 45 cm long complete all as directed.

S&F Stainless sensys soft close 0 crank concealed slide on cabinet Hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm) complete all as specified and directed

S&F Stainless Steel Decorative Cabinet Handle 100 mm complete all as specified and directed

Material and Labour for second class hard wood in scantling, clean swan ,incl to replace old and delayed timber ( including piecing ,scarfing ,etc.,of old and new timbers if required ) complete all as specified.

S & F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles not exc 200 cu cm each complete all as specified and as directed.

S & F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified and as directed.

S & F in repair Stainless Steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail as approved by GE) complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and as directed.

S & F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F aluminium handle, cast type anodized 100mm size complete all as specified and as directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and as directed.

S & F as in repair hasp and staple 150mm size of aluminium anodised complete all as specified and as directed.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S & F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

Supply & fixing Stainless Steel butt hinges medium weight of 100mm long complete all as specified and directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 50mm long complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

M & L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair complete all as specified and as directed.

M & L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair complete all as specified and as directed.

Supply only WPC complete all as specified and directed.

Demolition of cement concrete (reinforced), cutting scraping and cleaning reinforcement including M&L for providing RCC 1:2:4 type B1 including form work and scaffolding upto 6.00 m height in chajjas, parapets, roof projections and similar RCC works complete including rendering 10 mm thick in CM 1:3 finished even and smooth without using extra cement on RCC surfaces. (New reinforcement to be provided shall be measured and paid for separately) complete all as specified and as directed.

M & L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm in width or girth including preparation of surfaces complete all as specified and as directed.

M & L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel surfaces over 10cm in width or girth including preparation of surface complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion paint complete all as specified and directed.

M & L preparing new plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and directed

M&L for complete removal of existing surface and applying two coats of oil bound distemper over a coat of primer white or tinted on old decorated/undecorated surfaces of wall complete all as specified and directed.

M&L for complete removal of existing surface and applying two coat of Oil Bound Distemper over a coat of primer on old decorated/undecorated surfaces of Ceiling complete all as specified and as directed.

Material & Labour for preparation of new plastered or unplatered surface of wall and applying two coats of cement base paint over coat of primer complete all as specified and directed.

M&L for complete removal of existing surface and applying two coat of cement base paint over a coat of primer on old decorated/undecorated surfaces of walls complete all as specified and as directed.

Material & Labour for applying a layer of wall care putty 3mm thick average on wall surfaces including cornics etc for proper levelling of plaster complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of Plastic Emulsion paint (Interior) over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing surface and applying two coat of Plastic Emulsion Paint (Interior) over a coat of primer on old decorated/undecorated surfaces of Ceiling complete all as specified and as directed.

Material & Labour for preparation of new plastered or unplatered surface of wall, applying a layer of wall care putty 2mm thick average and Finishing with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for complete removal of existing treatment by scraping down , preparation of old surface of walls, applying a layer of wall care putty 2mm thick average and Finishing with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed.

Returning fillingin, including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm thick in hard/dense soil compleate all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete all as specidied and as directed.

M&L for cement concete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Material and labour for unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8 ) type D-2 (using 40mm graded stone aggregate) as in sub base finished even and rough complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Roof tiles, Mangalore pattern,interlocking at side joints on chhajja top , laid on with and including 15mm thick screed bed or bedding in CM 1:4 complete all as specifed and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection incl all necessary form work & finishing surface even & smooth using extra cement complete all as specified and as directed.

S&F rolled MS Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats brackets etc. Complete all as specified and as directed.

M & L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specified and as directed.

Material & Labour for 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.

S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all specified.

Material & Labour for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and as directed.

Dismantling water tanks of capacity exc 500 but not exc 1000 ltr capacity complete all as specified and as directed.

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concretecomplete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling framed timber scantlings under 40 sq. cm in section in fillets, rails, posts, rafters, purlins, etc complete all as specified and as directed..

S&F Rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters, purlins, post conforming to Fe 290 (Grade E-165) where connected to common rafters and running rails and embbeded in concrete complete all as specified and as directed. .

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S & F prepainted aluminium zinc corrugated steel sheet (galvalume base) of thickness 0.50mm having tensile strength of 550 Mpa , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed. Note : the work shall be carried out upto height from 2m to 16m.

S & F prepainted aluminium zinc plain steel sheet (galvalume base) of thickness 0.50mm having tensile strength of 550 Mpa , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed.

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights, bells etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and as directed..

Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including PVC casing/capping and accessories including sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor (FRLS) cable earth wire and connected to earth, etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge)

All as per item No.176 here-in-before but one light point controlled by one two way switch.

All as per item No.176 here-in-before but one socket outlet 5Amp on the same board.

All as per item No.176 herein before but one 3 pin socket outlet 5 Amp independent.

All as per item No.176 here-in-before but one bell point controlled by one bell push switch.

All as per item No 176 here-in-before but wiring with 2.5sqmm copper wire (FRLS) PVC and 2.5 sqmm earth (FRLS) wire for socket outlet 5 pin 15 amps on independent board.

Supply , laying , connecting, testing and commissioning of 16 Sqmm 4 core earthed system under ground LT XLPE insulated screened, PVC bedded, armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts laid in trenches, fixed to walls/ drawn through pipe with suitable size glands, crimping type lugs and incl the disturbence surface of road making good with using PCC etc all as specified of the following sizes. Complete as specified and directed. Note;-(Excavation, earthwork send cushioning and cable protection shall be measured and paid for separately.)

Supply , laying , connecting, testing and commissioning of 4 Sqmm 2 core earthed system under ground LT XLPE insulated screened, PVC bedded, armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts laid in trenches, fixed to walls/ drawn through pipe with suitable size glands, crimping type lugs and incl the disturbence surface of road making good with using PCC etc all as specified of the following sizes. Complete as specified and directed. Note;-(Excavation, earthwork send cushioning and cable protection shall be measured and paid for separately.)

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note : Punned down thickness of sand shall be considered for measurement and payment.

Supply and laying unreinforced precost concrete cable cover class LV, type I, flat of size 250x150x40mm. Complete as specified and directed

M & L for fixing garden pole Cast Aluminium heavy pole designer leg and broader designer base finished with polyurethane paint (with proper treatment). Diameter of one leg is Approx 76mm, Outer dia for Spi got entry 60mm. 03 Nos T Shaped bolts with nuts and washer (Length of pole is 2438mm) including concrete foundation as per requirement of of pole and direction of Engr-in-Charge at site . Complete as specified and directed by Engr-in-Charge. Make- Mepro electricals and Cat no- MCPL-05.

M & L for fixing of garden light having Cast Aluminium body finished with polyurethane paint (with prior treatments) with acrylic window cover and brass holder provided with Aluminium cover. (Total length533mm) suitable for 15 to 20 watt Led Bulb. Complete as specified and directed by Engr-in-Charge. Make- Mepro electricals and Cat no- PTL-150.

Supply and Fixing one sided bracket fully cast aluminium finished with polyurethane paint (with prior treatments) with suitable junction with max projection breadth of 310 mm. suitable for one numbers light.box Cat No-CDPB-05. Complete as specified and directed by Engr-in-Charge

Supply and fixing outdoor type junction box made up of PVC material with UV treated of size not less than 30 cm x 25 cm x 20 cm with locking arrangement inclusive of 20 x 3 mm thick aluminium bus bar (for 3 phase and neutral) with incoming MCB TPN 40 Amps - 01 Nos and outgoing MCB SPN 20 Amps-02 Nos fixed in bus bar with provision of cable entry and exit. fixed with necessary flat iron clamps , nut and bolt fixing in wall complete all as specified and as directed by the Engr-in-Charge and site requirement. Make-Havells and or eqivalent as approved by accepting officer.

Supply & Fixing lamp holder (dome type) PVC insulated body with cord grip cap for angle/battern fitting complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed.

Supply & Fixing Bell push, flush type, 6 Amp complete all as specified and directed.

Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply & fixing Bell electric musical type AC 230 volts, 50 Hz single pole complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed.

Supply and fixing 6 Amp one way switch, 1 module of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz.Electrical supply and as directed by Engr-in-Charge.

All as per item No.201 here-in-before but 6 Amp two way switch, 1 module

All as per item No.201 here-in-before but 6 Amp 2/3 Pin combined socket shuttered, 2 module

All as per item No.201 here-in-before but Modular Switch 1 way 16 Amp, 1 Module

All as per item No.201 here-in-before but Modular socket 6A/16Amp, 2/3 pin combined, 2 Module

All as per item No.201 here-in-before but 6 Amp bell push switch modular type

All as per item No.201 here-in-before but Steped type electronic fan regulator modular, 120W-2 module

Supply and fixing of modular front plates, 2 Module white with frame on existing boxes complete as required complete all as specified and directed.

All as per item No.208 here-in-before but 3 Module

All as per item No.208 here-in-before but 4 Module

All as per item No.208 here-in-before but 6 Module

All as per item No.208 here-in-before but 8 Module

Supply and fixing anodised rust proof 18 SWG MS box, flush type of size 75mm x 105mm x 50mm deep (1-2 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required complete all as specified and directed.

All as per item No.213 here-in-before but 75mm x 105mm x 50mm deep (3 Module)

All as per item No.213 here-in-before but 75mm x 105mm x 50mm deep (4 Module)

All as per item No.213 here-in-before but) 75mm x 210mm x 50mm deep (6-8 Module)

Supply & Fixing sheet metal enclosure with socket plug top and MCBs Single pole and neutral enclosure 240 Volt with a two pin and earth plug and socket complete with on single pole MCB 20 Amp complete including taking down unserviceable sheet metal enclosure of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of FP and current carrying capacity 40 to 100 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including chase cutting and making good surface as original by plastering and white/ colour wash/ distempering etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 6 sqmm and one run of 4 Sqmm as applicable incl PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including chase cutting and making good surface as original by plastering and white/ colour wash/ distempering etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 10 sqmm and one run of 6 Sqmm as applicable incl PVC conduit will be measured as one unit ie one running metre”

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. Make Havells cat pat LUMILINEBS20WLED865SPCWH or equivalent of Phillips/Wippro/Bajaj/Surya complete Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

S & F LED light fitting 1X10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells cat pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in make Phillips/Wippro/Bajaj & C&S . Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply, fabricating and fixing of sheet metal encluser made of 16 gauge MS sheet outdoor type of suitable size including fixing of MCCB of cap 200 Amp, 415 Volt,50Hz, 4 pole, 36 KA, AC supply with 300 Amp rated busbar on porcelain insulators for neutral link double door type with locking arrangement complete with MS angle iron frame of size 25 x 25 x 5mm with nut/bolts and PCC plateform work in 1:3:6 type C-1 including painting with two coat of synthetic enamal paint over one coat of red oxide/ primer complete all as specified and directed at site