REPAIRS AND DAY TO DAY MAINTENANCE WORKS TO FLOOR WALL ROOF SANITARY FITTINGS JOINERIES ETC IN C AREA AND SINGLE LIVING ACCN IN G AREA AT NB K

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish outside MD land premises complete all as specified and directed.

M&L Non- skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Non Skid Coloured Ceramic tiles coloured light shade 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured , as in vertical surfaces, size 350x 250x 7 mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match, including 15 mm thick Screed bed or bedding layer in CM (1: 4 ) complete all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M&L for pre polished Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick Screed bed or bedding layer in CM 1: 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and incl 20mm thick cement screed in CM 1:4 complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 40mm thick PCC type B0 1:2:4 (using 12.5mm graded stone aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and directed.

Demolition of plain cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D2, (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Hard core of Gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete type C1, 1:3:6 (20mm graded stone aggregate) 75 mm thick as in plinth protection and finished the surface even and fair without using extra cement c complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling ceiling boards any thickness including cover fillets complete all as specified and directed. .

S&F Aluminium snap grid false ceiling on frame work of aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying one coat of white washing to new ceiling surfaces including preparation of surfaces cg complete all as specified as per manufacturer's instructions and all as specified and directed.

S&F in repair 12mm Perforated particle board/ tiles for insulation and acoustic purposes (wall), 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid frame work complete all as specified and as directed.

M&L for one coat of white washing to new Perforated particle board surfaces including preparation of surfaces complete all as specified.

Dismantling timber scantlings 40 sqcm and over in section, in any position complete all as specified and as directed .

M&L for second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in framed work, complete all as specified and as directed.

Dismantling timber framed work scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc, complete all as specified and as directed

M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 6 sqcm and n exe 13 sqcm, complete all as specified and as directed .

M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 13 sqcm and n exe 25 sqcm, complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed .

Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and as directed.

S&F second class hard wood clean swan battens for tiles fixed at 30 cm centre to centre, Sectional area exc 5 sqcm and nexc 15 sqcm complete all as specified and as directed.

All as per item No 31 above but fixing only battens complete all as specified and as directed . Note:- Battens obtained from dismantling shall be re-used.

M& L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and as directed .

M& L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed .

All as per item No 34 above but except tiles ( tiles obtained from dismantling shall be used) complete all as specified and as directed .

M& L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 36 above but except tiles complete all as specified and as directed. Note:- Ridge , hip tiles obtained from dismantling shall be re-used.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re-fixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed .

S & F EURO GUARD PRO SQUARE UPVC RAINWATER GUTTER (220 MM), with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed .

S & F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed .

S & F PVC eaves gutter 180mm dia, semi circular with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed ( Height up to 12 mtr)

S & F 180mm bore PVC (SWR) rain water pipes , with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed

S & F 180mm bore PVC (SWR) bends, any radius, fixed with rubber ring joints all as specified ( Height up to 12 mtr)

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed .

S&F 0.71 mm thick, aluminium sheeting alloy 31000 H4 in ridge, hip, valley gutter, drip and straight flashing(length and girth as fixed) complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F Roof trusses (framed) conforming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr in Charge.

Cleaning vegetation growth over MP tiles placed on RCC sloped roof / chajja etc and removing rubbish outside MD land up to four story complete all as specified and as directed by Engr-in-charge. (The quoted rate shall include the cost of scaffolding as necessary)

Taking down the existing water proofing treatment from the roof including cement mortar bedding, removing debris outside MD land and cleaning the roof complete all as specified.

M&L for 10 mm thick layer of rendering with CM 1:3 with and including WPC as per manufactureres instruction over and incl neat cement slurry @ 3.0 Kg of cement per square metre complete all as specified. (WPC shall be measured and paid separately).

M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bituminous aluminium paint @ 100 g/sqm, complete all as specified and as directed by Engr-in-Charge and as per manufacturer's instructions.

Supply only Liquid water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L chipping off the disintegrated concrete of sunken slabs and sides and clean the area with wire brush and coir brush. Seal the disturbed area with polymer modified mortar using of approved make. Coving has to be done at all the corners with polymer modified mortar Seal all the plumbing line sand holes with non shrink grout of make BASF/ M/S Fosroc, IWL, STP Ltd. Replace all pipes by PVC and shall be placed properly in position Keep the water on sunken tanks and floors for 24 hrs for observing the leakages and to ensure water tightness. Pressure grouting has to be done at all the damaged areas/ joints with water proofing admixture .Water proof the area with Acrylic polymer modified water proofing coating , Brush bond RFX or equivalent in two coats. Water proofing products confirm to BASF/ M/S Fosroc chemicals pvt ltd/ IWL, STP Ltd.

M&L for cleaning of rolling shutter and applying greasing on steel surfaces in side channels for smooth functioning of all steel members complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of epoxy coated paint over one coat of epoxy primer complete all as specified.( Height up to 15 mtr)

M&L for preparation of old steel surfaces of any description (except truss) over 10 cm in width or girth not otherwise described and applying one coat of epoxy coated paint over one coat of epoxy primer complete all as specified.( Height up to 15 mtr) Note: The quoted rate shall include the cost of scaffolding as necessary.

S&F in repairs Aura 500 mm dia Turbo Ventilator made out of Aluminium with Fluro Carbon coating with additional fan leaves for efficient removal of warm and stale air with high quality Japanese NSK bearing No 6201z &6202z with suitable base plate made out of aluminium and suitable for installing on metal sheet and aluminium sheets including cutting and making holes of required size on existing roof for fitting the same or similar work to reach the height up to 20 metres etc complete all as specified and as directed.

M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Removal of vegetation/ shrub growth over walls, RCC roof, RCC chajja, gutter up to four storey building cleaning the surface and spraying acid of required concentration and quantity making good holes with cement mortar(1:3) or cement concrete 1:3:6 type C1 each hole not exceeding 0.10 sqm area including necessary scaffolding etc complete all as specified and as directed .

M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of Apex Ultima protek top coat complete all as specified and as directed .

M&L Preparation of newly plastered wall surfaces and applying two coats of weather proof antifungal paint from Asian paint (Apex ultima protek) / Dulux paints (Weather shield) / Nerolac paints(Excel) over a coat of anti fungal primer duly applied through authorised company applicator using modern tools and techniques of approved make complete all as specified and as directed. Note: The quoted rate shall be inclusive of M&L for necessary scaffolding complete.

M&L for one coat of brush bond TGP crystalline capillary water proofing system for cementitious substrates for water proofing against the positive or negative sides of wall for damp proofing, repairing cracks, plugging holes and stopping active leakage complete all as specified and directed .

M&L for preparation of old painted steel and iron surface of ROOF TRUSS over 10cm width or girth and applying one coat of epoxy anticorrosive paint over a coat of primer (approximate 15 Mtr height) complete all as specified and as directed . Note: (The quoted rate shall include the cost of scaffolding as necessary)

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and directed .

Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and but n exc 4 Sqm complete all as specified and directed .

Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and directed .

All as per item No. 69 here-in-before but exceeding 1.00 Sqm and not exceeding 2.00 Sqm complete all as specified and directed .

Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and re-fixing in same opening

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and re-fixing in same opening

S&F 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

S&F 2nd class hard wood 30mm thick glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a).

All as per item No 75 here-in-before but divided into square with sash bars, any numbers

S&F 2nd class hard wood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauze etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a).

S&F 2nd class hard wood 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made both side Prelaminated PVC sheet used solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelaminated colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Complete all as specified.

S&F aluminium anodised barrel tower bolt extruded section of 200 mm long.

All as per item No 81 here-in-before but fixed in repairs

S&F aluminium anodised barrel tower bolt extruded section of 150mm long.

All as per item No 83 here-in-before but fixed in repairs

S&F aluminium anodised barrel tower bolt extruded section of 100mm long.

All as per item No 85 here-in-before but fixed in repairs

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

All as per item No 89 here-in-before but fixed in repairs.

S&F stainless steel butt hinges medium weight for 100mm size.

S&F extruded aluminium alloy handles fabricated type anodised 150 mm size.

All as per item No 90 here-in-before fixed in repairs.

S&F extruded aluminium alloy handles fabricated type anodised 100 mm size.

All as per item No 92 here-in-before but fixed in repairs.

S&F aluminium plate type II gate and shutter hooks and eyes of 200mm size

All as per item No 94 here-in-before but fixed in repair.

S&F in repair tubular towel rail 20mm dia brass chromium plated with brackets fixed in repairs 60cm long complete all as specified. Make :Parryware Cart part No.T6901A1 or equivalent to Hindware/Cera

S&F in repair stainless steel curtain rail bright finished 25 mm dia decorative type complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel bright finished decorative brackets/finials for curtain rail 25mm dia.

S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plats.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples.

All as per item No 100 here-in-before but fixed in repair.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads.

S&F Sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane.

S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe.

S&F in repairs vitreous China wash down water closet single piece (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe. Make: Parryware single piece suite Apollo C8939 (S-220) (690 x 375 x 730mm) or equivalent make of Hindware /Cera

S&Fing in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. MAKE : Cera/Parryware/Hindware

S&Fing in repair plastic water closet seat for single piece closet, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make : Parryware EWC Seat cover E 8305 Ultra Solid white or equivalent make of Cera/Hindware

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete

S&F in repair Vitreous China Urinal, Half stall type, white all as specified excluding flushing pipe and waste pipe in repairs.

S&F in repair Vitreous china urinal partition white of size 310x700 mm all as specified and as directed by Engr -in-Charge.

S&F in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets.

S&F 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Pillar Tap with aerator Parryware Cart Part No.Crust T3102A1 or equivalent make of Hindware/Cera

S&F in repair SS soap dish complete all as specified. Make : Parryware Cart part No.T6902A1 or equivalent make of Cera/Hindware

S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx.), with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engr -in-charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete.

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engr -in-charge.

S&F in repair PVC backing looking mirror of size 45x60cm fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement all-round, 100 mm dia with minimum weight 25 gms.

S&F in repair Waste coupling of PTMT 32mm bore dia (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed.

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface complete all as specified. Make : STP Ltd or equivalent approved make.

Taking down cement plastered on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

M&L for cement plaster in two coat 8 mm thick in cement mortar 1:4 using WPC over 12mm in cm 1:6 on external surfaces finished even & smooth without using extra cement all as directed. (WPC shall be measured and paid separately)

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coats of cement base paint over a coat of priming complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new decorated surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coast of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for applying 1.5mm thick wall care putty on old and new plaster surface of wall complete all as specified and as directed by Engr-in-Charge.

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and re-fixing the same in the same opening after repairing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed.

S&F for powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron), complete shall as specified, and as directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified

S&F anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) sliding window and ventilator frame without sash bar including all necessary jointing cleat , hold fasts , rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium handle, locking arrangement etc based on HINDALCO catalogue No. 1. 4095 - 61.98x29.70x1.60 mm = 2 Track 2. 9777 - 39.00x20.00x1.60 mm = Shutter Vertical 3. 3994 - 41.00x20.00x1.20 mm = Shutter top & Bottom. 4. 9778 - 39.00x20.00x1.50xmm = Shutter Vertical Inter Lock complete all as directed by the Engineer- in Charge.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge

S&F in repairs aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition shall be catalogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and as directed .

S&F 9 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed .

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F in repairs aluminium anodised grill ,having mesh size 50 mmx50 mm made out of 6 mm wide 3 mm thick aluminium section including 'U' clips and all necessary fixing arrangements complete all as specified and as directed .

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for damp proofing course, etc., and making good, cutting n. exc 20 cm girth

Demolition of reinforced cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed

Material and labour for providing pre-cast cement concrete 1: 2 : 4 type B1 using 20mm stone aggregate as in cover slab, shelves, cooking slab and similar articles and set in CM 1: 6 including necessary formwork complete all as specified and as directed. Note:- The reinforcement shall measured and paid separately.

M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

M&L TMT bars 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

S&F in repair Steel rolling shutters, (lath thickness 1.25mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Taking down existing wall panelling and similar works complete all as specified and as directed

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-charge

Material and labour for providing 5mm self levelling EPU system consisting of 3mm thick NITOFLOR EU5 (FOSROC LTD) OR 21N PURPM + 31M (SIKA LTD) OR CIPOTHANESI (CIPY LTD) AND 2mm thick top coat any NITOFLOR EPU 2000 (FOSROC LTD) OR 21 N PURPM + 31 M (SIKA LTD) OR CIPOTHANESI (CIPY LTD) using a 'V' notch trowel and rolled by spike roller over epoxy primer including removal of damaged portions of old EPU floor ing, cleaning the old surface as per manufacturers instructions all as specified and as directed by Engineer in charge.

Dismantling of boarding of any description, fixed in any position with nails complete all as specified and as directed.

S&F 4 mm thick AC sheet as in ceiling / eves board including cutting and fixing with screws to existing frame work of MS tubes complete all as specified and as directed . Note:- Replacement of MS tube if any necessary shall be measured and paid separately

S&F 6mm thick AC sheet as in partition including cutting and fixing with screw and to existing frame work of MS tubes complete all as specified and as directed. Note:-Replacement of MS tube if any necessary shall be measured and paid separately

M&L for 40 x 40 x 2mm MS Tubes fixed to wall / ceiling with necessary fixing arrangements complete all as specified and as directed .

Dismantling of SS hand rail including vertical post complete all as specified and as directed by Engr -in-Charge.

S&F for stainless steel hand rail (SS 316), rectangular/ round tube any size including end caps etc complete all as specified and directed by Engr -in-Charge.

Albert Rebello and Company

ST ANTONY CONSTRUCTIONS

LAKSHMI BUILDERS

SUKU CONSTRUCTIONS