Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹16,340
Closing Date
25 Sept 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer STD Ganderbal
Office of Executive Engineer STD Ganderbal
Renovation and Modernization of Various Receiving Stations in respect of STD Ganderbal Sub-Division Sumbal
2023_PDD_227437_1
STD GBL 19 OF 2023-24 DATED 24-08-2023
Open Tender
Civil Works
Turn-key
45 days
Shadipora, Markundal, Safapora, Kurhama
Refer SBD
10 documents required · 10 mandatory
₹500
Yes
Office of Executive Engineer STD Ganderbal
₹16,340
Yes
27 Sept 2023
24 Aug 2023
26 Sept 2023
24 Aug 2023
25 Sept 2023
28 Aug 2023
26 Aug 2023 - 25 Sept 2023
Amount
Renovation and Modernisation of Receiving Station Kurhama and Safapora
Reinforced cement concrete M 20 grade in walls (any thickness) incld. attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. upto floor five level excld. cost of centering, shuttering finishing & reinforcement . (Columns, Walls, Counters and C Beams)
Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete (T.M.T).
Centring & Shuttering for lintels, suspended floors, columns etc.
P/F of Ceramic glazed floor tiles (thickness to be specified by the manufactures) of Ist quality conforming of IS:13755 of NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in colour such as White, Ivory, Gray, Fume Red brown laid on 20 mm thick bed of cement Mortor 1:4 (1 cemnt:4 coarse sand) including pointing the joints with White cement and matching pigment etc complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1-cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm
Cement conc. flooring 1:2:4 mix finished with a floating coat of neat cement incld. cement slurry, but excl. the cost of noising of steps etc. complete, 50 mm thick with 20 mm nominal size, stone agg. (Crushed)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with one coat of primer and Two or more coats of paint on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Providing and fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar taps 32mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls where ever required. White Vitreous China Wash Basin size 630mmx450mm with a pair of C.P brass pillar taps
Providing and fixing approved colour viterous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing stainless steel grating on waste water pipe fitted on suitable frame including all carriages upto site of work complete job.
Providing and fixing PVC waste pipes flexible type for sink and washbasin including PVC fittings complete flexible
Providing and fixing PVC flexible type soil waste and vent pipes for disposal system from bath & kitchen upto Septic tank & Soakage pit with all accessories complete Job
Construction of brick masonry manhole in cement mortar 1:4(1 cement : 4coarse sand) RCC top slab with 1:2:4 foundation concrete 1:4:8 inside plastering 12mm thick in cement mortar 1:3 Mix Size of manhole 90x80x 45 cm inside
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge:Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. 19.1.2.1 1216 (16mm OD) pipe
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge External work including trenching and refilling etc. complete (20mm OD) pipe
Providing and fixing salem stainless steel sink A ISI 304(18/8) KITCHEN SINK as per IS 13983 with CP Brackets amd stainless plug 40mm including painting of all necssary accsories and making good the wall whatever required.510x1040mm bowl depth 225mm
Providing and fixing pipe specials 15mm dia reputed make (RESP, Jaquar, Parco, NIKE,etc ) ISI mark including all carriages upto site of work complete job.
CP bib cock
CP bib cock long nose
CP angle valve
gate/ball /stop valve
Wall Mixer
Sink Mixer
Providing and fixing toilet paper holder CP brass
Providing and fixing towel rail CP brass
Providing and fixing soap case CP brass
Providing and fixing water heater reputed make (venus, racold, etc) ISI mark including all necessary firrings including making good wall after installation all complete
Construction of wardrobes/almirah for security of records using 19 mm thick particle/solid ply wood board with face of teak wood and frames of budloo wood incl. fixing of all hardware fitting such as Godrej ring locks, magnetic catcher, Glass panes etc. as per directions of Engineer-In-Charge
Renovation and Modernisation of various Receiving Station Markundal
Providing and laying of 12 mm thick Plaster in 1:4 mix on inner and outer walls lincl carriage of all materials involved etc complete job.
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old wood work.
Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)
Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying one coat of water/oil thinnable primer of approved brand and manufacture on wall surface
Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm
Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:2:4 (1 cement: 2course sand: 4 grade stone aggregate 20 mm nominal size including all carriage leads, lifts up to site of work)
Providing and fixing of Kiln seasoned and chemically treated hollock wood/imported kail wood for wooden frame work in SBA room and Batery room including cost of hold fasts and one coat of wooden primmer a etc complete job.
Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete
Modification of Existing Electric Wiring by way of Dismantalling of existing wiring system and re-errection the same including necessary modification where ever required including providing of one number 32 amp heating socket with acessories , one number of 250 mm exhust fan and 15 No'sber lighting point including necessary swith board and led blub fixture etc, 1 No. of 12 way SPN DB complete job.
Renovation and Modernisation of various Receiving Station Shadipora
Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as direction of Engineer-in-charge: In cement mortar
Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 course sand: 8 grade stone aggregate 20 mm nominal size(quarry) including all carriage ,leads, lifts up to site of work)
Providing & laying of dry solling hand packing, incl sand filling in voids in foundation including all leads , lifts and carriage head load etc upto site of work complete job.
Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:2:4 (1 cement: 2course sand: 4 grade stone aggregate 20 mm nominal size including all carriage leads, lifts up to site of work)
Brick work with FPS bricks of class designation 75 upto floor II level in cement mortor 1:6 (1 cement :6 coarse sand) incl carriage of all materials involved complete job.
Providing and laying of 12 mm thick Plaster in 1:4 mix on inner and outer walls lincl carriage of all materials involved etc complete job.
Providing and fixing of Plumbing / saintary items/Fixtures , of reputed make, lincl carriage of all materials involved complete job.
ball value 15mm
Bibcock c. p brass
Angle Value
15mm dia PPR Pipes
socket PPR
Union PPR
ElbowPPR
Tee PPR
4" P.V.C. pipe (B- type)
3" P.V.C. pipe (B- type)
4" P.V.C. bend plain /door type
3" P.V.C. bend plain /door type
4"pvc Collar
3"pvc bend
floor trap with jali
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, walls, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg sqm, including pointing in white cement mixed with pigment of matching shade complete.
Fixing chowkhat in existing opening in brick/RCC wall with dash fasteners/chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos. on each vertical member of window chowkhats), including cost of dash fasteners/chemical fasteners
Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete
Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as the direction of the Engineer-in-charge.
Modification of Existing Electric Wiring by way of Dismantalling of existing wiring system and re-errection the same including necessary modification where ever required including providing of one number 32 amp heating socket with acessories , one number of 250 mm exhust fan and 10 No's lighting point including necessary swith board and led blub fixture 1 No. of 12 way SPN DB etc complete job.
Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old wood work.
Distempering with 1st quality Acrylic/oil bound washable distem (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as manufacturers’ specifications, one or more coats on old work
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying one coat of water/oil thinnable primer of approved brand and manufacture on wall surface.
Providing and fixing of Kiln seasoned and chemically treated hollock wood/imported kail wood for wooden frame work in SBA room and Batery room including cost of hold fasts and one coat of wooden primmer a etc complete job.
MUSHTAQ AHMAD MIR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .