Annual Plan-2063/26-Thrissur corporation 2025-26 ayyanthole zonal div 51 open gym in Nethaji ground

CHEST PRESS Supplying, fixing and installation minimum 100 NB GI pipe for main frame, 32 NB GI pipe handle frame, 25 NB GI pipe clamps, nylon 66 injection molded casing, foot rest: Lid Roto molded seat within built bolts 3/8”x1.5” pipe cap: Nylon 66 injection molded bearing housing and pin -seamless pipe and round, Bearing: permanent sealed of reputed make Powder coat: Done by pure polyester powder with 70-80-micron thickness powder

LEG PRESS Supplying, fixing and installation Main pipe Dia-127mm, Thickness- 3mm Base plate -200mm., Thickness-10mm. Powdercoat : Done by pure polyester powder with 70-80 micro thickness powder Size:-2185x460x1700mm

AIR WALKER Supplying, fixing and installation using 100 NB GI pipe for Main Frame minimum 32NB GI pipe for leg frame, minimum 25 NB GI pipe for handle frame, nylon 66 injection molded casing clamps, LLDP roto molded seat with inbuilt cap and pipe cap fully done by first coat of primer-jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder

ROWER Supplying, fixing and installation Galvanized iron fabricated with main post of 114mm dia and rest of the pipes are of 50mm dia. Either GI pipes. Welding: All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edgesandburrs. Zincprimer paint to be applied at all welding points prior to finishing. POWDER COATING: Powder coated using Akzo Nobel or equivlent of 70-80 micro thick

TRIPPLE TWISTER Supplying, fixing and installation Pipe structure made of GI pipe of 114 mm OD. Connecting pipe- Made of GI pipe of 42 OD. Handle frame -Made of GI pipe of 32 OD. Bearing-Thrust ball bearing bearing caps-made up of HDPE material 62mm Twister Plates- Made of LLDPE pole caps-Made up of HDPE Material. Powder coated (thickness 90micro)

SINGLE STEPPER Supplying, fixing and installation using minimum 100 NB GI pipe for main frame, minimum 25 NB GI pipe for handle frame, minimum 25nb and 20NB GI pipe for seating frames stand, molded seat within built bolts3/8” x1.5” for footrest nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer jotun brad 40-50micron thickness and top coat of pure polyester powder with 70-80 micron thickness powdercoat

PENDULAM Providing and fixing using minimum 100 NB GI pipe for handle frame minimum 25 NB & 20 NB GI pipe for seating frame stand, molded seat within built bolt 3/8” x1.5” for footrest nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat