Loading…
Loading…
Tender Value
₹12.7 L
EMD Value
₹25,400
Closing Date
2 May 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
30 days
Expenditure
Capital (Works)
OS CAPITAL
30 conditions · 15 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. as the case may be. Following documents should be submitted by the tenderer according to nature of firm, otherwise offer will be treated as invalid: -
Following documents should be submitted by the tenderer in case of HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of explanatory notes in clause 10 of Tender Document.
Following documents should be submitted by the tenderer in case of Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of Tender Document.
Following documents should be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of Tender Document
Following documents should be submitted by the tenderer in case of Partnership Firm: The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. (i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iv) All other documents in terms of explanatory notes in clause 10 and 18 of tender document
I/We have read and understood the condition of GCC 2022 and will submit all documents as per GCC 2022.
The following documents should be specified for submissionalong with tender
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work
List of works on hand indicating description of work, contract value,and approximate value of balance work yet to be doneand date of award
The tenderers whether sole proprietor , a limited company ora partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. alongwith the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistratein favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement ,receive money, witness measurements, sign measurement books ,compromise, settie,relinquish any claims, preferred by firm and also sign No Claim Certificate andrefer all or any disputes arbitration
Mandate Form/Bank details must be uploaded
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the qualification criteria mentioned in the tender document.
BIDDER SHOULD SUBMIT ESIC REGISTRATION CERTIFICATE
BIDDER SHOULD SUBMIT EPF REGISTRATION
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
The above power of attorney shall be submitted even if such specific person is authorized for above purposes through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration.
Para 6.1 Part-I of GCC shall be read as under:- The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to annexure-V, in case of other than Company/proprietary firm, Annexure-V A shall also be submitted by the each member of partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership etc.as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the qualification criteria mentioned in the tender document
Para 11 (iv) Annexure-I,Part-I of GCC shall be read as under:- The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to annexure-V, in case of other than Company/proprietary firm, Annexure-V A shall also be submitted by the each member of partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership etc.as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the qualification criteria mentioned in the tender document
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Bidders are advised to follow the above eligibility and qualifying criteria and submit documents in proper format toqualify their bid for evaluation of offer. If any of the documents is found missing or not in proper form, their offer will not beconsidered for evaluation and post tendering correspondence will not be made to get any additional paper in support of theirclaim for qualifying and eligibility criteria
Note- Segregation of AC Circuit from other load to be ensured (A) On account 90% payment will be made to contractor against supply, installation,testing and commissioning on production of material inspection certificate receipted challan, joint note with Sr.DEE(G) Authorized supervisor, test certificate of manufactureretc.(b) The number (i.e. maximum/minimum) of on account payment will be decided by the Sr. DEE/G/MGS depending upon the performance of contractor or importance of work.(C) Balance 10% will be released/ paid with the final bill after successful completion, testing & commissioning of the complete awarded/ approved varied workd. In case of AMC 85% quarterly will be made rest 15% payment will be made after successfully completion of three year.
Contractor is to abide by the provisions of Payment of Wages act & MinimumWages act. In order to ensure the same, an application has been developedand hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractorshall register his firm/company etc. and upload requisite details of labour andtheir payment in this portal. These details shall be available in public domain.The Registration/ updation of Portal shall be done as under: (a)Contractorshall apply for onetime registration of his company/firm etc. in theShramikkalyan portal with requisite details subsequent to issue of Letter ofAcceptance. Engineer shall approve the contractor's registration in the portalwithin 7 days of receipt of such request. (b)Contractor once approved by anyEngineer, can create password with login ID (PAN No.) for subsequent use ofportal for all LoAs issued in his favour. (c)The contractor once registered onthe portal, shall provide details of his Letter of Acceptances (LoA) / ContractAgreements on shramikkalyan portal within 15 days of issue of any LoA forapproval of concerned engineer. Engineer shall update (if required) andapprove the details of LoA filled by contractor within 7 days of receipt of suchrequest. (d)After approval of LoA by Engineer, contractor shall fill the salientdetails of contract labours engaged in the contract and ensure updating ofeach wage payment to them on shramikkalyan portal on monthly basis. (e)Itshall be mandatory upon the contractor to ensure correct and promptuploading of all salient details of engaged contractual labour & paymentsmade thereof after each wage period. While processing payment of any 'OnAccount bill' or 'Final bill' or release of 'Advances' or 'Performance Guarantee /Security deposit', contractor shall submit a certificate to the Engineer orEngineer's representatives that "I have uploaded the correct details of contractlabours engaged in connection with this contract and payments made to themduring the wage period in Railway's Shramikkalyan portal at'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway thereunder.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of up to two years.
As per GCC Advance correction slip no.05 para 5 (3) ii. The original Bank Guarantee should be delivered to Office of the Sr.DEE(G)/DDU before closing date for submission of bids (i.e. excluding the last date of submission of bids)
WORK SCHEDULE : Part-A)- Electrification of Construction of 10 Units Type - II Qtrs at Loco colony / DDU /DIVN. (Part -B)- Electrification oConstruction of 10 Units Type - II Qtrs at Plant Depot colony / DDU/DIVN. (Part-C)-Electrical. work Replacement of RCC Overhead tank at Station Colony / DDU /DIVN
DDU-EL-G-P-2024-25-03AB
DDU-EL-G-P-2024-25-03AB
Open
Works - General
6 Months
Chandauli, Uttar Pradesh
₹0
₹25,400
2 May 2025
7 Apr 2025
70 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,78,785.3 | ||
| Supply of XLPE LT Aluminium cable of size 4 core x35 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make:: NGG , Paragon, ,Nicco, Universal, KEI | — | — | — | 20,300 | |
| Transportation of above cable from store to site. (supplied by Railway) | — | — | — | 80 | |
| Wall clamping of cable on wall /bridge through suitable clamp of size 50x6 mm of MS flat or catenary of cable through 4 SWG GI wire with suitable clamps (As per site requrement) | — | — | — | 1,332 | |
| Concealed Wiring of Light Point/Fan/Exhaust fan point / Call Bell point in heavy gauge PVC conduit pipe as per IS 9537 with PVC insulated single core 1.5 sqmm multistrand copper conductor wire in voltage grade 1100 volt as per IS 694 with ECC of 1/18 SWG copper wire. Make : Polycab, Anchor, Finolex, Havells, RR Kabel. | — | — | — | 19,125 | |
| Concealed wiring of 5 Amp plug point in heavy gauge PVC conduit pipe as per IS 9537 with PVC insulated single core 1.5 sqmm multistrand copper conductor wire in voltage grade 1100 volt as per IS 694 with ECC of 1/18 SWG Copper wire. Make : Polycab, Anchor, Finolex. | — | — | — | 3,750 | |
| Supply,Fixing,testing and commissioning of 15/5Amp 5 in 1 combined switch, socket , fuse units duly ISI Approved as per IS:6538/1971 make: Anchor, EPP. JJ | — | — | — | 5,760 | |
| Concealed Wiring of main from main distribution board to sub board in heavy gauge PVC conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 2.5 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab,Havells. | — | — | — | 40,000 | |
| Concealed wiring of main from main distribution board to sub board in heavy guage PVC conduit pipe as per IS:9537 with PVC multistrand copper conductor of size 2 x 4 sqmm in voltage grade 1100 volt as per IS:694 with ECC of 1/18 SWG copper wire, make of wire: Finolex, Plaza , Polycab,Havells. | — | — | — | 29,252 | |
| Concealed Wiring of main from main distribution board to sub board in heavy gauge PVC conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 6 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab,Havells. | — | — | — | 67,408 | |
| Concealed Wiring of main from main distribution board to sub board in heavy gauge PVC conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x10 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab . | — | — | — | 17,550 | |
| Supply and fixing of ding Dong Call bell make: Anchor EPP, JJ,Arkeylight | — | — | — | 780 | |
| Supply, fixing, connection, testing and commissioning of LED fitting indoor type , Lumen efficiency 100 lumen/watt ,output system wattage 42W (+10%, 5%) with IP 65 or better protection water proof surface/suspendedmounting suitable for operation on 140VA 270V AC supply, LED used in fittings should be of make : NICHIA/OSRAM/ SEOUL/CREE/PHILIPS LIMITEDS/LEDNIUM with warranty period of 5 yrs from date of commissioning or 6 yrs from date of supply whichever is earlier complete with testing arrangement. Make : Bajaj, Philips, Havells. | — | — | — | 79,296 | |
| Supply of LED lamp 9 W Make - Philips, , C&S, BAJAJ, cromptom. | — | — | — | 2,761.6 | |
| "Supply , fixing , testing and commissioning of LED Street light Luminaires Wattage 60 , 6500 K Pressure Dire cast Aluminium Housing with Heat Resistant Toughened Glass and IP 66 Protection . Make - PHILIPS , Bajaj , Havells , Surya " | — | — | — | 61,942.8 | |
| Fixing of Exhaust fans with suitable clmps ensuring safety of the fan. (Exhaust fan will be supplied by Railway ) | — | — | — | 1,387.4 | |
| Fixing, Testing and commisioning of BLDC Ceiling f a n 5 Star Rated with sutiable clamps ensuring the safety of fan. (Ceiling fan supplied by railway) | — | — | — | 1,350 | |
| Fixing, testing and commissioning of storage type Electric water heater with suitable clamps ensuring the safety . | — | — | — | 1,600 | |
| Supply , fixing , testing and commissioning of 16 Amp. SP MCB in 4 way DB in sheet steel enclosure . Make - Siemens as per IS 13947 Pt - II 1993 . Make - Siemens , Standard , Havells , Haggers , L&T | — | — | — | 4,953 | |
| Supply, fixing, testing and commissioning of 32 Amp. DP Main switch . Make - Anchor, havells, Standard , Indoasian | — | — | — | 704.9 | |
| Supply,fixing,testing and commissioning of Earth Leakage Circuit Breakers of capacity 25 Amp with sensitivity 300 mA as per IS:8828/IEC898, Make - HAVELLS, SIEMENS, L&T. | — | — | — | 7,614.9 | |
| Supply & erection of earthpit as per IS 3043 GI pipe used in size of 50 mm dia x3 mtrs long medium gauge with alternate layer of charcoal and salt as per Sr. DEE(G) drg no MGS/EL/G/Drg/01/08-09 dt 08.08.08 .Make of GI pipe :Tata, Jindal, Bansal | — | — | — | 6,394.5 | |
| Providing and fixing of medium grade GI pipe size of 50 mm dia complete with GI fittings including trenching and reffiling etc for cable protection.(Shell thickness 3.6 mm. Minimum wt. 5.03 Kg/mtr. Make:- Jindal, Tata, Bansal. | — | — | — | 4,677.8 | |
| Supply and fixing of seasond and impregnated teakwood board of size 203 x 300 mm. with single top face and hinged on one side and locking arrangement at another side. | — | — | — | 535.4 | |
| Fixing of electronic energy meter on teak wood board with proper secure and safe arrangement | — | — | — | 230 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .