Construction of One Block of Type-III (2 set) for HPSEBL and One Block of Type- III (2-Set), Type -1 (3- Set) for HPPTCL at Paonta Sahib under PIU KalaAmb of HPPTCL, District- Sirmaur, H.P

Cutting in Earth Work in all kinds of soil including rock and disposal of excavated earth upto 5 Km in all leads & lifts as per the direction of the Engineer in- charge.

Excavation in Foundations,in all kind of soil and rock , Trenches, roads etc, in Earth Work, in all lifts stacking, the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required into Plinths sides of Foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the directions of Engineer in charge.

Providing and Laying 1: 3: 6 (1 Cement: : 3 Sand : 6 Graded Stone Aggregate 40 mm nominal size ) and Curing complete including Cost of Form Work in Foundation and Plinth.

Providing and Laying reinforced Cement Concrete M20 (Design Mix with Graded Stone Aggregate 20 mm nominal size) and Curing complete including Cost of Form Work and excluding reinforcement for Reinforced Cement Concrete Work including admixtures/additives in all type of work as per directions of Engineer -in- charge including foundation bolts etc. wherever required.

Providing & Laying Damp Proof Course 50 mm thick with Cement Concrete, 1: 2: 4 (1 Cement: 2 Sand: 4 Stone Aggregate 12.5 mm nominal size) and Curing complete including applying a coat of hot bitumen ( 80/100 or Equivalent) using 1.70 Kg/sqm on DPC after cleaning the surface.

Providing and Laying Cement Concrete, 1: 2: 4 (1 Cement: 2 Sand: 4 Sand Stone Aggregate 20 mm nominal size) and Curing complete including Cost of Form Work in Foundation and Plinth & coping etc. wherever required.

Providing and Laying Cement Concrete 1: 5: 10, (1 Cement: 5 Sand: 10 graded Stone Aggregate 40 mm nominal size) and Curing complete including cost of centering and shuttering in Foundation and Plinth.

Providing Mild/Tor Steel Reinforcement for R. C. C. Work including Bending, Binding and Placing in position complete for all heights.

Providing and laying Brick Work using Common Burnt Clay Bricks in:-

Providing and laying Brick Work using Common Burnt Clay Bricks in foundation and plinth in Cement Mortar 1: 4 (1 Cement:4 Sand).

Super Structure above Plinth level upto all heights in Cement Mortar 1: 4 (1 Cement: 4 Sand) First Class Bricks.

Half Brick Masonry above plinth level upto all heights including providing and laying 2 Nos. 6mm dia MS Bars at every 4th course of masonry in cement mortar 1:4 (1 Cement :4 sand) up to all heights and as directed by Engineer- In- Charge.

15 mm cement plaster in single coat on rough / fair side of brick /concrete /stone wall for interior plastering up to all heights including arises.internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth. ( in cement mortar 1:4 , (1 cement: 4 sand).

20mm cement plaster in two coats (8mm + 12mm) on rough / fair side of brick /concrete /stone wall for exterior plastering upto all heights including arise external rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth. ( in cement mortar 1 :4 , 1 cement: 4 sand for 8mm outer layer and 12mm base as 1:4 as obove ).

6 mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand).

Stone soling/pitching/filling under floors and for road work/behind retaining walls as per directions of Engineer- In- Charge.

P/L Sand filling under floors as per directions of Engineer- In- Charge including watering and compaction complete.

Providing and laying granite stone in flooring 20 mm (average) thickness base of cement mortar 1:4 (1 cement :4 Sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 20 mm thick.

Kota stone slab flooring 20 mm average thick base of cement mortar 1:4 (1Cement : 4 sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab/floor including rubbing & granite polishing complete.

Providing and laying antiskid vitrified tiles 5.5 mm thick in flooring (600mmx600mm) size except for WC for which size is 300 mm x 300 mm & 300 x 450 wall tiles to be used and treads of steps laid on a bed of 20 mm thick cement mortar 1:4 (1Cement: 4 sand) ( Double Charged finished with flush pointing with pigment to match the floor finish.

Distempering two coats with oil bond washable distemper of approved brand & manufacture of required shade on undecorated wall surfaces to give an even shade including putty over & including a priming coat with distemper primer of approved brand & manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing Wall with Water Proofing Cement Paint of approved Brand and Manufacture and of required Shade on Undecorated Wall Surfaces (Two coats) to give an even Shade after thoroughly Brushing the surface to remove all Dirt, Loose or Softened Paint.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing & fixing Double action hydraulic floor spring of approved brand & manufacture, cost of cutting floor as required embedding in floors & cover plates etc complete as per the direction of Engineer -in charge

Steel work welded in built up sections, single sections, NG rails, ladders, beam joists, channels including cutting, hoisting, fixing in position and applying a priming coat of red lead & painting two coats on new steel & other metal surfaces with enamel paint brushing to give an even shade i/c cleaning the surfaces of all dirt, dust &other foreign matter with enamel paint &other than white paint complete in all respects as per direction of Engineer- In- Charge.

Constructing 1:1.5:3 PCC open surface drain with side wall 15x22 cm. including earth work &laying 10 cm. cement concrete in 1:5:10 (1cement 5 sand 10 graded stone aggregate of 40 mm nominal size ) and 7.5 cm cement concrete 1:2:4 (1 cement 2sand 4 graded stone aggregate of 20mm nominal size ) and finished with a floating coat of neat cement.complete as per standard design.

Providing laying (to level or slopes) and jointing reinforced concrete heavy duty non - pressure pipes IS class NP 4 of the following internal diameter with flush joints including testing of joints complete.

Providing and fixing on wall face PVC (DIPLAST/ FINOLEX/ ASTRAL MAKE) Rain water pipes of 110 mm diameter including fittings/clamps the joints complete in all respects.

Providing and fixing PVC (DIPLAST/ FINOLEX/ ASTRAL MAKE) pipes (Type- B) of 100/150/200mm diameter including fittings/clamps the joints complete in all respects.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge only. (Single / double glass panes shall be inclusive i.e 5.5 mm thick single toughened glass) complete in all respects.

Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door 2sqm to 5 sqm).

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double toughened glass panes of 5.5 mm thick and silicon sealant shall be inclusive) complete in all respects.

Fixed window/ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm )(Ventilators).

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge only. (Single / double toughened glass panes of 5.5 mm thick and silicon sealant is inclusive , wire mesh shall be paid separately) complete in all respects.

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Providing and fixing factory made uPVC white coloursliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge only. (Single / double glass panes and silicon sealant inclusive, wire mesh shall be paid separatel) complete in all respects.

Two track four panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm up to 10.00 sqm).

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete in all respects.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double toughened glass panes of 5.5 mm thickness and silicon sealant shall be inclusive )Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.)

Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching beading.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Prelaminated with decorative lamination on both sides exterior grade-I MDF board 12 mm thick confirming to IS:14587/uPVC Panel.

Supplying and errection of Dewatering Pumps (2 HP) of ISI approved brand i.e. Kirloskar, Havells or equivalent and as per directions of Engineer- In- Charge.

Providing and fixing 19mm thick commercial board in shelves/box for cup boards with butt joints & fixing with nails & screws etc complete.

Providing and fixing 19mm thick Commercial Board shutters for cup boards including all fittings (Fancy Handles, tower bolts, magnetic catchers, locks, hinges etc.) and accessories complete in all respect as per directions of EIC.

Providing and fixing 0.80 mm thick lamination sheet of approved shade and quality fixed with approved adhesive and nails complete including carriage of material within all leads and lifts.

Painting two coats( including priming coat ) on new wood & wood based surfaces with enamel paint brushing to give an even shade i/c cleaning the surfaces of all dirt, dust & other foreign matter, sand papering and stoping within all leads, lifts of material and other incidentals.

Providing and fixing hard wood plain square edged cover fillets beeding 19x6 mm section including mitring at junction with wooden screws and nails etc complete including carriage of materials in all leads and lifts.

Providing and fixing 18mm thick 150mm wide coir veneer board pelmet ISI marked with top cover of 6mm coir veneer board with 25mm diameter curtain rods of stainless steel and brackets including fixing 25 x 3mm M.S. flat at 10 cm. Long and plugs etc with . complete in all respects and as per directions of EIC.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. completet in all retspetcs (SUPREME/ASTRAL/ FINOLEX MAKE)

15 mm nominal dia

20 mm nominal dia

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete in all respects. (Cera , Hindware , Jaguar)

Providing and Fixing wash basin with C.I Brackets 15 mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern , including painting of fittings and brackets , cutting and making good the walls whereever required : complete in all respects. ( Cera , Hindware , Jaguar)

White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap

White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm C.P. brass pillar tap (Dining area)

Providing and Fixing brass bib cock (long nose/short nose) of approved quality : 15 mm nominal bore ( Cera/ Jaguar/ Hindware)

Providing and Fixing mirror of superior glass ( of approved quantity) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backings: Rectangular shape 453 X 357 mm complete in all respects.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Complete in all respects.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gmscomplete in all respects

Providing and Fixing PTMT grating of approved quality and Colour : Circular type 100 mm nominal dia complete in all respects.

Providing and Fixing C.P Brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 15 mm nominal bore complete in all respects( Cera/ Jaguar/ Hindware)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia complete in all respects ( Cera/ Jaguar/ Hindware)

Providing and Fixing unplasticized PVC connection pipe with brass unions : 30 cm Length 15 mm nominal bore complete in all respects ( Cera/ Jaguar/ Hindware)

Providing and Fixing 600 x 120 x 5 mm glass shelf with edges round off , supported on anodised aluminium angle frame with C.P Brass brackets and guard rail complete fixed with 40 mm long screws , eawl

Providing and White vitreous China pedestral for Wash Basin completely recessed at the back for the reception of pipe and Fittings ( Cera / Hindware / Jaguar)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete in all respects.

Providing and Fixing on wall Face unplasticised - PVC Moulded Fittings/ accessories for unplasticised - PVC Moulded Fittings/ accessories for unplasticised Rigid PVC rain water / soil waste / vent pipes conforming to IS : 13592 Type A , including jointing with seal ring conforming to IS : 5382 , leaving 10 mm gap for therrmal expansion (DIPLAST/FINOLEX/ ASTRAL make) complete in all respects.

Coupler 110 mm dia

Single Tee without Door 110 X 110 X 110 mm

Bend 87.5 degree 110 mm dia

Single Tee with Door 110 X 110X 110 mm

Providing and Fixing PVC floor trap (P/S type) of self ceaning design including fixing with approved adhesive ,cost of cutting and making good the foors etc (110mm*110/75mm) (DIPLAST/FINOLEX/ ASTRAL make) complete in all respects.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank IS : 12701 marked , with cover and suitable locking arrangement amd making necessary holes for inlet , outlet and over flow pipes and Floating Valve but without Fittings and the base support for the tank . (1000 Litres ) ( Vectus / Sintex/ Supreme make )

Providing and Fixing PVC Cowl including Carriage of Materials with in all leads and lifts. (DIPLAST/FINOLEX/ ASTRAL make) complete in all respects.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge complete in all respects. (Cera/ Jaguar/ Hindware)

Providing and fixing CP brass shower rose with 15 or 20 mm inlet-100 mm dia

Providing and fixing Geyser of 15 litre capacity with all necessary fittings complete in all respects (HAVELS/CROMPTON/ORIENT make)

Providing and fixing instant Geyser of 5 litre capacity for kitchen with all necessary fittings complete in all respects (HAVELS/CROMPTON/ORIENT make)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board of 610x510 mm, bowl depth 200 mm complete in all respects (Cera/ Jindal/ Hindware)

Constructing masonry Chamber 60x45x50 cm to 1m inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including CI covers of required size complete in all respects.

Supplying and fixing C.I. cover for septic tank with frame for 600 x 550 mm rectangular C.I. cover (light duty) complete in all respects as per direction of Engineer-In-Charge.

Providing and fixing vent pipe of 100 mm diameter complete in all respects.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Dismanatling of RCC/ Brick/ steel/ concrete/ structural steel/ brickwork/ wood work /aluminium work etc. above and below the ground complete in all respects and stacking of serviceable material at site and disposal of unserviceable materials upto a lead of 10 Km as per direction of engineer in charge for following works:-

Type- III Quarters- 2 No. (Slab Area= 90 sqm)

Septic tank & soak pit of existing quarters.

Please Enable Macros to View BoQ information