AMC SERVICES FOR ROU

Amount

Earth filling from brought out earth:- (excluding rock) in trenches, open pits, over pipeline trenches etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering to any lead and lift etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline

Empty HDPE cement bags filled with cement and sand:- Providing and laying in position empty HDPE cement bags filled with cement sand in the ratio 1:10 (1 cement:10 coarse sand), after stitching/sewing of bags with nylon thread, handling, placing & watering etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). Item include cost of the material, transportation, all resource, royalty etc. complete in all respect

Empty HDPE cement bags filled with earth:- Providing and laying in position empty HDPE cement bags filled with earth after sewing the bag, including placing, handling, watering as directed by Engineer-InCharge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). The item shall be paid as per compacted volume measured at site. Item include cost of the material, transportation, all resources, royalty etc. complete in all respect.

SUPPLY & FILLING OF COARSE SAND:- Supplying and filling in plinth with Jamuna sand/Grade Zone-III under floors, including watering, ramming, consolidating and dressing complete in all respect as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete including with required resource, tools & tackles to complete the work in all respect (without any extra cost)

EXCAVATION AND OR BACKFILLING IN ALL KIND OF SOIL:- Earth work in excavation over areas by manual/mechanical means (Hydaullic Excavator) as and when required as per site condition to required length , width and depth including backfilling/disposal of excavated earth, with all lead & lift, disposed earth to be leveled and neatly dressed including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking as per drawings, specification & direction by EIC & upto satisfaction of EIC (including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc.) all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost). In all kind of soil.

EXCAVATION IN ORDINARY ROCK:- Earth work in excavation over areas by mechanical means (Hydaullic Excavator) (exceeding 30 cm in depth, 1.5m in width as well as 10 sq.m.on plan) including disposal of excavated earth, with all lead & lift, disposed earth to be leveled and neatly dressed including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking as per drawings, specification & direction by EIC & upto satisfaction of EIC (including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc) all complete with including required resources, tools & tackles to complete the work in all respect (without any extra cost). In ORDINARY ROCK.

Repainting Warning Sign board refer (DRG-001) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge.

Repainting Direction Marker refer (DRG No.-002) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Kilometer Marker refer (DRG No.-003) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Arial Marker refer (DRG No.-004) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Boundary Pillar refer (DRG No.-005) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Navigable Warning Board (DRG No.-0060) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Vent & drain pipe refer (DRG. 007) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Installation of uprooted existing markers/ boards at the existing or designated location / chainage including excavation for foundation, PCC grouting with 1:2:4 cement concrete, laying in postion by shuttering, centering etc backfilling, disposal of surplus soil, old PCC material , minor rectification like straightening bent pipes, plates etc. as applicable. The item includes cost of materials, consumables, all resource, tools & transportation. As per drawings issued & satisfaction of EngineerIn-Charge

Supply & Installation of Warning Sign board refer DRG-001 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Direction Marker refer DRG No.-002 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Kilometer Marker refer DRG No.-003 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Aerial Marker refer DRG No.-004 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Navigable Warning Board DRG No.-006 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Installation of Vent/Drain pipe DRG. 007 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Precast ROU boundary marker: Supply & Installation of precast ROU boundary marker as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge (Refer to drawing No. 005)

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 25 M x 25 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 50 M x 50 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx Size 100 M x 100 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

Minor Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. all resource, material along with associated transportation shall be in the scope of contractor.

Major Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. If required additional boring depth upto 300 ft. shall also be increased along with putting new GI pipes hardware to make the hand pump in good working condition. all resource, material consumables etc along with associated transportation shall be in the scope of contractor.

Supply of nitrogen gas in cylinders

ROU ENCROACHMENTS HANDLING & FRONT CLEARING:- Providing assistance for the removing encroachment of ROU as per direction of GAIL which includes coordination with encroachers for the removal at initial level, coordination with the concerned authority for the removal of encroachment, charges for the transportation, boarding & lodging etc also if required as per situation.

FABRICATION, SUPPLY & ERECTION OF STEEL STRUCTURES:- Work at site in built up section in RS joists i.e. angles, channels, tee, pipes, flats, I beams, chequered plats, sheets etc. for cross overs, platforms, stands, pipe supports & similar structures, GI cable trays, nuts bolts, washers etc. including cutting, welding & fixing in position at site as per scope of works & direction of E-I-C

DISMANTLING OF STRUCTURE STEEL: Dismantling of steel structure, as per instructions of engineer in-charge, including gas cutting, removal from site, unbolting , shifting the same to the GAIL's designated store/yard or Pipeline installations as per the instruction of engineer-in-charge.

COATING REPAIR:- Coating repair using Cold Applied tapes (Inner wrap, Outer wrap and primer)/PERP-patch application system supplied by GAIL (Primer, Inner wrap and Outer wrap) (Area shall be final surface area of pipeline including primer, Inner wrap and Outer wrap)

PROVIDING EQUIPMENTS ON HIRE - Excavator cum Loader - JCB (1400 Kg bucket / 1.1 Cum loader capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Pick and carry crane - Hydra (14 Ton Capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Engine Driven Dewatering Pump Set : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Generator 3 KVA with lighting facilities ( 04 nos of 400 W HPSV) along with necessary fittings : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Providing tractor trolley of standard capacity or more including supplying of 3 all resources for loading unloading the articles, necessary operators, all resourceers and fuel etc. for Carriage /Disposal of material or other purposes by tractor trolley within/around premises of Plant or RoU of any lead as directed by EIC. Payment on Pro rata rate basis in multiple of half day

PROVIDING SERVICES ON HIRE - Pipe Fitter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Rigger : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Qualified (CS) Pipe Welder/Cutter

PROVIDING SERVICES ON HIRE - Mason/ Carpenter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Plumber/ Painter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Helper/Labour : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING & LAYING PCC 1:2:4 : Providing and laying PLAIN CEMENT CONCRETE of Nominal Mix 1:2:4 by mass (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc. or any other works etc. including cenering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING RCC 1:1.5:3 : Providing and laying REINFORCED CEMENT CONCRETE of Design/Nominal Mix 1:1.5:3 by mass (1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc.or any other works etc. including centering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as per drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

REINFORCEMENT FOR RCC Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

DEMOLISHING CEMENT CONCRETE:- Demolishing CEMEMT CONCRETE/RCC WORK (taking all necessary safety precautions) for all depth below plinth & heights above plinth level by mechanical means including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

BRICK WORK IN CEMENT MORTAR (1 CEMENT : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 below & above plinth level in foundation, substructure & superstructure etc. in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).ALL MATERIALS INCLUDING BRICK, CEMENT SUPPLIED BY THE CONTRACTOR.

DEMOLISHING BRICK WORK : Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead.

15MM THICK CEMENT PLASTER: 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. Item also Include the removal of existing plaster if required. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING CC FLOORING (40MM) Providing and laying average 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry etc.all complete. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

PROVIDING & LAYING CC PAVER BLOCK: Providing and laying factory made chamfered edge Cosmic Cement Concrete Paver Blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer#s specifications & direction of Engineer -in-Charge: 60 mm thick c.c. paver block of M-30 grade with approved color design and pattern inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth.

TAKING OUT EXISTING PAVERBLOCKS & REFIXING THE SAME :- Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand (jamuna sand), filling the joints with fine sand etc. inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be carefully taken out and relaid). including all material. with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

SUPPLY & FIXING OF GLASS PANES 3 to 4 mm : Renewing glass panes, with putty and nails wherever necessary with glass panes. Supply and fixing of the Window Glass panes 3 to 4 mm thick as per requirement with good quality glass putty, nails/clips. Glass, glass-putty, nails/clips and any other required consumable, resource, transportation of material are in the scope of Contractor. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

SUPPLYING & FIXING PVC FLOORING : Supply & Fixing 3 mm(± 10%) thick PVC Flooring of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC Flooring should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & FIXING ACID TILE: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS :4457, complete as per the direction of Engineer-in- Charge. In flooring. dado/skirting etc places on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.ALL MATERIALS INCLUDING Acid & Alkali Resistant Tile SUPPLIED BY THE CONTRACTOR.

CLEANING OF ROU: Clearing of wide ROU Strip jungle including cutting & uprooting of rank vegetation, grass, brush wood, trees and saplings of all girth & height above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the ROU Limit area cleared as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).

RCC HUME PIPE -150MM DIA : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes of 150 mm Nominal Diameter, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, at specified Pipe line ROU site. Normal Length required of each pipe is 2.5 metres.etc. all complete.with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

PVC Pipe- 110/75 MM Dia: Providing of PVC pipes (dia 110/75 mm) approved make (ISI mark) as per direction of EIC including required solution for fixing etc. complete.

PROVIDING & LAYING CONCENTRINA COIL:- Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron #Y# shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

PROVIDING & FIXING CHAIN LINK FENCING Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge

FIXING OF CHAIN LINK FENCING TO MS ANGLE Fixing Chain link fencing to M.S. angle posts with GI wire (New wire will be provided as per direction of EIC with reference to the old not workable wire), hooks etc. complete wherever required as per directions of EIC (Chain link fencing will be supplied by GAIL) wire 6 gauge minimum three rows, hooks etc.complete.

SUPPLYING , FILLING, SPREADING AND LEVELING Supplying, filling, spreading & leveling stone boulders of size range of mixture from 125 mm to 300 mm. , in the required thickness, for all leads & lifts, at various locations.all complete with including required resources, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

WHITE WASHING WITH LIME ON OLD WORK: White washing with lime to give an even shade at old work with minimum two or more coats. Item include Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

SYNTHETIC ENAMEL PAINTING : Painting on G.S. sheet/STRUCTURE with synthetic enamel paint of approved brand and manufacture (Asian/Berger/Nerolac) of required colour to give an even shade. New work (two or more coats) including a coat of approved steel primer.all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC/SIC.

LETTERING - 1" to 4": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 1" to 4" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 4" and up to 8" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 4" to 8" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 8" and Up to 12": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 8" to 12" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 12" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 12" to 24" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource required for lettering complete )

PROVIDING & LAYING VETRIFIED TILE :- Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints with white cement & matching pigments etc. complet. Size of Tiles 600 mm * 600 mm * 10 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & FIXING 12MM THICK COMMERCIAL PLY :- Providing and fixing 12mm Thick Commercial Ply conforming to IS : 1328 BWR type including biddings/plain lining with necessary screws/nuts & bolts/ nails,including a coat of approved primer on one face, and fixed on wooden /steel frame work, at various locations like RR stations etc.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & LAYING GRANITE STONE SLABS (20MM) : Granite stone slabs in flooring, counters, treads etc.(perfectly levelled) over and including 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

SUPPLYING & FIXING RADIUM PRINTING :- Supply & Fixing 2 mm thick Radium Printing of specified shade colour on any surfaces (like the mettal bords, Acrylic sheet, wall etc.) with good quality adhesive(including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. The radium writing with base with use of multi colours and computerized flow chart should be done as per direction of EIC . The radium should be of standard quality having weather resistant for a period of at least 5 year

SUPPLYING & FIXING SUN FILM:- Supply & Fixing of 1 mm thick Sun Film of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resources, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & LAYING CERAMIC TILE (300mm x 300mm x 8mm ) : Providing and laying rectified Glazed Ceramic, matt-finished,non slip type tiles of approved make & shade at floors, skirting, wall, dado or anywhere places etc. including cleaning the finished surface with oxalic acid, wax polishing 300mm x 300mm x 8mm (+5%) thick tiles of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

EXTRA FOR ROUND NOSING /MOULDED EDGE TO MARBLE / GRANITE : Extra for round nosing/moulded edges (as per approved design) to marble/granite stone slabs .all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

EXTRA FLORRING /SKIRTING /DADO ITEMS : Extra over marble/ kota stone flooring/ skirting/ dado items for providing mirror polishing (in place of normal polishing) by grinding machine (suitable for mirror polishing) comprising of multiple grindings up to 6 nos. with carborundum stone (in descending order of hardness of grinding stone), one no. grinding with Italian grinding stone and one no. grinding with foam buffer set and polishing with Teno-oxide granite powder etc. all complete to give a smooth and mirror-like shining surface.all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

PROVIDING & FIXING WHITE VITREOUS CHINA:- Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

RENEWAL OF OLD PUTTY OF GLASS PANNES:- Renewal of old putty of glass panes (length). all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & APPLYING ROOF WATERPROOFING:- Providing and applying Acrylic base flexible liquid applied Membrane system of approved make for roof insulation and waterproofing. All works shall be carried out as per specifications and manufacturer's instructions including all byeworks and at all heights and levels and also as per the directions of the Engineer Incharge.

PROVIDING & FIXING FALSE CEILING:- Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm,both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm * 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive)and electro statically polyester powder coated of thickness 60 microns (min), including factory painted after bending.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

Gabion Wall:- Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge.

PROVIDING & FIXING CPVC PIPE:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & all fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm to 150 mm nominal outer dia Pipes with all fittings & accessories.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

Anodised Aluminum Window Frame: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Aluminium Composite Panel(ACP) Sheet 4mm:- Aluminium Composite Panel (ACP) Sheet 4mm in various sizes fro fixing in aluminium window/Door frame or for display board purpose.

P&F Precoated GS sheet:- Providing and fixing pre-coated G.S. Sheet (COLOUR COATED) 0.50 mm thick in roofing of approved colour, brand and manfacturer including P/F ridges curve sheets at ends & flashing etc. and necessary fashners as recommended by the manufacture and as per site requirements (The item includes removal of damaged/ existing sheet, wherever required and fixing / placing of sheets at all heights). Crane may be provided by GAIL, (if available) without any charge for fixing / placing of sheets , as directed by GAIL. Payment shall be made in Sqm for the finished work in superficial area in the general plane of roof.

Providing and fixing white vitreous china urinal: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

OIL BOUND DISTEMPERING ON OLD WORK:- Distempering with oil bound washable distemper of approved brand and manufacture (ASIAN/BERGER) to give an even shade Old work (two or more coats). Item includes Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

WEATHER PROOF CEMENT PAINT:- Finishing walls with water proofing cement paint (ASIAN/BERGER/APEX Pinats)of required shade Old work (two or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. Item include surface preparation & applying one coat of cement primer before applying the paint on the old work. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

POLYURETHANE PAINT WITH INTERMEDIATE EPO:- "POLYURETHANE PAINT WITH INTERMEDIATE EPOXY PAINT & PRIMER AS PER PAINTING SPECIFICATION NO. S-1 WHICH INCLUDES COMPLETE SURFACE PREPARATION, APPLYING OF one coat High solid polyamine cured epoxy primer paint.(self priming mastic)DFT 75-100 microns, one coat of Two component polyamide cured Epoxy High build coating- DFT 100-125 microns, 1 coat of two component acrylic-polyurethane finish paint- DFT 50-60 microns etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PAINTING WITH ALUMINIUM PAINT CHAIN LINK:- Painting with aluminium paint of silver colour to give an even shade in Chain link fencing/ Barbered wire fencing including metallic supports if any, of SV/RR/IP & Terminal stations. Two or more coats at old surface including cleaning and sand papering and applying primer wherever required. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

ECO SOLVENT VINYL printing:- ECO SOLVENT VINYL printing with matt/gloss lamination in different sizes as per EIC instruction and stckering of same on existing surfaces.

Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe:- Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level, In All types of Soil/Rock

Supply and installation of New Handpump:- Providing and installation of India mark II deep well hand pump with followings:-a) C.I. Cylinder (1 No.)b) G.I. Link rod (10 Nos.-12mm dia -3 meter length mt.)c) 32mm dia GI pipe class-B 10 Nos. each of 3 mtrs. Length and also minor accessories etc.complete as per unicef instructional manual and upto the satisfaction of EIC.

Providing & Fixing 12mm Dia. G.I. Link rod of 3m length (if required)

Providing & Fixing 32mm dia G.I. Raiser pipe of class 8 of 3m length (if required).

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia:- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

Supply & Fixing of 2 H.P. Single Phase :- Supply & Fixing of 2 H.P. Single Phase PLUGA / TEXMO / KIRLOSKAR Make submersible pump , size 32mm , Head 171 Mtr. Including all complete electrical & Mechanical fittings , wiring , Starter ( L&T / GEC / Bajaj / Schneider Electric make) equivalent to the above pump

32mm Dia HDPE Pipe 10 kg/cm2, ISI BRAND

12 mm PVC Rope ISI

10mm , 3 Core Copper Cable ISI ( Finolex/ United/ Anchor / National Make )

Supplying and placing H.D.P.E. tank for all floor levels inlcudingnecessary connections (fittings shall be paid separetely) complete (I S I. )

Providing and fixing HDPE / GI Pipes complete with fittings andclamps,including cutting and making good the walls etc(Internal work / External work) a) 25 mm Nominal bore as per direction of EIC

Description of Work / Item(s)

Amount

Earth filling from brought out earth:- (excluding rock) in trenches, open pits, over pipeline trenches etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering to any lead and lift etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline

Empty HDPE cement bags filled with cement and sand:- Providing and laying in position empty HDPE cement bags filled with cement sand in the ratio 1:10 (1 cement:10 coarse sand), after stitching/sewing of bags with nylon thread, handling, placing & watering etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). Item include cost of the material, transportation, all resource, royalty etc. complete in all respect

Empty HDPE cement bags filled with earth:- Providing and laying in position empty HDPE cement bags filled with earth after sewing the bag, including placing, handling, watering as directed by Engineer-InCharge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). The item shall be paid as per compacted volume measured at site. Item include cost of the material, transportation, all resources, royalty etc. complete in all respect.

SUPPLY & FILLING OF COARSE SAND:- Supplying and filling in plinth with Jamuna sand/Grade Zone-III under floors, including watering, ramming, consolidating and dressing complete in all respect as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete including with required resource, tools & tackles to complete the work in all respect (without any extra cost)

EXCAVATION AND OR BACKFILLING IN ALL KIND OF SOIL:- Earth work in excavation over areas by manual/mechanical means (Hydaullic Excavator) as and when required as per site condition to required length , width and depth including backfilling/disposal of excavated earth, with all lead & lift, disposed earth to be leveled and neatly dressed including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking as per drawings, specification & direction by EIC & upto satisfaction of EIC (including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc.) all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost). In all kind of soil.

Repainting Warning Sign board refer (DRG-001) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge.

Repainting Direction Marker refer (DRG No.-002) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Kilometer Marker refer (DRG No.-003) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Arial Marker refer (DRG No.-004) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Boundary Pillar refer (DRG No.-005) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Navigable Warning Board (DRG No.-0060) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Vent & drain pipe refer (DRG. 007) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Installation of uprooted existing markers/ boards at the existing or designated location / chainage including excavation for foundation, PCC grouting with 1:2:4 cement concrete, laying in postion by shuttering, centering etc backfilling, disposal of surplus soil, old PCC material , minor rectification like straightening bent pipes, plates etc. as applicable. The item includes cost of materials, consumables, all resource, tools & transportation. As per drawings issued & satisfaction of EngineerIn-Charge

Supply & Installation of Warning Sign board refer DRG-001 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Direction Marker refer DRG No.-002 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Kilometer Marker refer DRG No.-003 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Aerial Marker refer DRG No.-004 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Navigable Warning Board DRG No.-006 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Installation of Vent/Drain pipe DRG. 007 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Precast ROU boundary marker: Supply & Installation of precast ROU boundary marker as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge (Refer to drawing No. 005)

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 25 M x 25 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 50 M x 50 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx Size 100 M x 100 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

Minor Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. all resource, material along with associated transportation shall be in the scope of contractor.

Major Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. If required additional boring depth upto 300 ft. shall also be increased along with putting new GI pipes hardware to make the hand pump in good working condition. all resource, material consumables etc along with associated transportation shall be in the scope of contractor.

Supply of nitrogen gas in cylinders

ROU ENCROACHMENTS HANDLING & FRONT CLEARING:- Providing assistance for the removing encroachment of ROU as per direction of GAIL which includes coordination with encroachers for the removal at initial level, coordination with the concerned authority for the removal of encroachment, charges for the transportation, boarding & lodging etc also if required as per situation.

FABRICATION, SUPPLY & ERECTION OF STEEL STRUCTURES:- Work at site in built up section in RS joists i.e. angles, channels, tee, pipes, flats, I beams, chequered plats, sheets etc. for cross overs, platforms, stands, pipe supports & similar structures, GI cable trays, nuts bolts, washers etc. including cutting, welding & fixing in position at site as per scope of works & direction of E-I-C

DISMANTLING OF STRUCTURE STEEL: Dismantling of steel structure, as per instructions of engineer in-charge, including gas cutting, removal from site, unbolting , shifting the same to the GAIL's designated store/yard or Pipeline installations as per the instruction of engineer-in-charge.

COATING REPAIR:- Coating repair using Cold Applied tapes (Inner wrap, Outer wrap and primer)/PERP-patch application system supplied by GAIL (Primer, Inner wrap and Outer wrap) (Area shall be final surface area of pipeline including primer, Inner wrap and Outer wrap)

PROVIDING EQUIPMENTS ON HIRE - Excavator cum Loader - JCB (1400 Kg bucket / 1.1 Cum loader capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Pick and carry crane - Hydra (14 Ton Capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Engine Driven Dewatering Pump Set : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Generator 3 KVA with lighting facilities ( 04 nos of 400 W HPSV) along with necessary fittings : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Providing tractor trolley of standard capacity or more including supplying of 3 all resources for loading unloading the articles, necessary operators, all resourceers and fuel etc. for Carriage /Disposal of material or other purposes by tractor trolley within/around premises of Plant or RoU of any lead as directed by EIC. Payment on Pro rata rate basis in multiple of half day

PROVIDING SERVICES ON HIRE - Pipe Fitter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Rigger : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Qualified (CS) Pipe Welder/Cutter

PROVIDING SERVICES ON HIRE - Mason/ Carpenter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Plumber/ Painter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Helper/Labour : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING & LAYING PCC 1:2:4 : Providing and laying PLAIN CEMENT CONCRETE of Nominal Mix 1:2:4 by mass (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc. or any other works etc. including cenering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING RCC 1:1.5:3 : Providing and laying REINFORCED CEMENT CONCRETE of Design/Nominal Mix 1:1.5:3 by mass (1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc.or any other works etc. including centering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as per drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

REINFORCEMENT FOR RCC Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

DEMOLISHING CEMENT CONCRETE:- Demolishing CEMEMT CONCRETE/RCC WORK (taking all necessary safety precautions) for all depth below plinth & heights above plinth level by mechanical means including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

BRICK WORK IN CEMENT MORTAR (1 CEMENT : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 below & above plinth level in foundation, substructure & superstructure etc. in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).ALL MATERIALS INCLUDING BRICK, CEMENT SUPPLIED BY THE CONTRACTOR.

DEMOLISHING BRICK WORK : Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead.

15MM THICK CEMENT PLASTER: 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. Item also Include the removal of existing plaster if required. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING CC FLOORING (40MM) Providing and laying average 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry etc.all complete. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

PROVIDING & LAYING CC PAVER BLOCK: Providing and laying factory made chamfered edge Cosmic Cement Concrete Paver Blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer#s specifications & direction of Engineer -in-Charge: 60 mm thick c.c. paver block of M-30 grade with approved color design and pattern inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth.

TAKING OUT EXISTING PAVERBLOCKS & REFIXING THE SAME :- Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand (jamuna sand), filling the joints with fine sand etc. inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be carefully taken out and relaid). including all material. with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

SUPPLY & FIXING OF GLASS PANES 3 to 4 mm : Renewing glass panes, with putty and nails wherever necessary with glass panes. Supply and fixing of the Window Glass panes 3 to 4 mm thick as per requirement with good quality glass putty, nails/clips. Glass, glass-putty, nails/clips and any other required consumable, resource, transportation of material are in the scope of Contractor. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

SUPPLYING & FIXING PVC FLOORING : Supply & Fixing 3 mm(± 10%) thick PVC Flooring of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC Flooring should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & FIXING ACID TILE: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS :4457, complete as per the direction of Engineer-in- Charge. In flooring. dado/skirting etc places on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.ALL MATERIALS INCLUDING Acid & Alkali Resistant Tile SUPPLIED BY THE CONTRACTOR.

CLEANING OF ROU: Clearing of wide ROU Strip jungle including cutting & uprooting of rank vegetation, grass, brush wood, trees and saplings of all girth & height above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the ROU Limit area cleared as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).

RCC HUME PIPE -150MM DIA : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes of 150 mm Nominal Diameter, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, at specified Pipe line ROU site. Normal Length required of each pipe is 2.5 metres.etc. all complete.with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

PVC Pipe- 110/75 MM Dia: Providing of PVC pipes (dia 110/75 mm) approved make (ISI mark) as per direction of EIC including required solution for fixing etc. complete.

PROVIDING & LAYING CONCENTRINA COIL:- Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron #Y# shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

WHITE WASHING WITH LIME ON OLD WORK: White washing with lime to give an even shade at old work with minimum two or more coats. Item include Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

SYNTHETIC ENAMEL PAINTING : Painting on G.S. sheet/STRUCTURE with synthetic enamel paint of approved brand and manufacture (Asian/Berger/Nerolac) of required colour to give an even shade. New work (two or more coats) including a coat of approved steel primer.all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC/SIC.

LETTERING - 1" to 4": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 1" to 4" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 4" and up to 8" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 4" to 8" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 8" and Up to 12": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 8" to 12" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 12" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 12" to 24" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource required for lettering complete )

PROVIDING & LAYING VETRIFIED TILE :- Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints with white cement & matching pigments etc. complet. Size of Tiles 600 mm * 600 mm * 10 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & FIXING 12MM THICK COMMERCIAL PLY :- Providing and fixing 12mm Thick Commercial Ply conforming to IS : 1328 BWR type including biddings/plain lining with necessary screws/nuts & bolts/ nails,including a coat of approved primer on one face, and fixed on wooden /steel frame work, at various locations like RR stations etc.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & LAYING GRANITE STONE SLABS (20MM) : Granite stone slabs in flooring, counters, treads etc.(perfectly levelled) over and including 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

SUPPLYING & FIXING RADIUM PRINTING :- Supply & Fixing 2 mm thick Radium Printing of specified shade colour on any surfaces (like the mettal bords, Acrylic sheet, wall etc.) with good quality adhesive(including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. The radium writing with base with use of multi colours and computerized flow chart should be done as per direction of EIC . The radium should be of standard quality having weather resistant for a period of at least 5 year

SUPPLYING & FIXING SUN FILM:- Supply & Fixing of 1 mm thick Sun Film of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resources, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & LAYING CERAMIC TILE (300mm x 300mm x 8mm ) : Providing and laying rectified Glazed Ceramic, matt-finished,non slip type tiles of approved make & shade at floors, skirting, wall, dado or anywhere places etc. including cleaning the finished surface with oxalic acid, wax polishing 300mm x 300mm x 8mm (+5%) thick tiles of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

EXTRA FOR ROUND NOSING /MOULDED EDGE TO MARBLE / GRANITE : Extra for round nosing/moulded edges (as per approved design) to marble/granite stone slabs .all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

EXTRA FLORRING /SKIRTING /DADO ITEMS : Extra over marble/ kota stone flooring/ skirting/ dado items for providing mirror polishing (in place of normal polishing) by grinding machine (suitable for mirror polishing) comprising of multiple grindings up to 6 nos. with carborundum stone (in descending order of hardness of grinding stone), one no. grinding with Italian grinding stone and one no. grinding with foam buffer set and polishing with Teno-oxide granite powder etc. all complete to give a smooth and mirror-like shining surface.all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

PROVIDING & FIXING WHITE VITREOUS CHINA:- Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

RENEWAL OF OLD PUTTY OF GLASS PANNES:- Renewal of old putty of glass panes (length). all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & APPLYING ROOF WATERPROOFING:- Providing and applying Acrylic base flexible liquid applied Membrane system of approved make for roof insulation and waterproofing. All works shall be carried out as per specifications and manufacturer's instructions including all byeworks and at all heights and levels and also as per the directions of the Engineer Incharge.

PROVIDING & FIXING FALSE CEILING:- Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm,both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm * 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive)and electro statically polyester powder coated of thickness 60 microns (min), including factory painted after bending.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & FIXING CPVC PIPE:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & all fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm to 150 mm nominal outer dia Pipes with all fittings & accessories.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

Anodised Aluminum Window Frame: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Aluminium Composite Panel(ACP) Sheet 4mm:- Aluminium Composite Panel (ACP) Sheet 4mm in various sizes fro fixing in aluminium window/Door frame or for display board purpose.

P&F Precoated GS sheet:- Providing and fixing pre-coated G.S. Sheet (COLOUR COATED) 0.50 mm thick in roofing of approved colour, brand and manfacturer including P/F ridges curve sheets at ends & flashing etc. and necessary fashners as recommended by the manufacture and as per site requirements (The item includes removal of damaged/ existing sheet, wherever required and fixing / placing of sheets at all heights). Crane may be provided by GAIL, (if available) without any charge for fixing / placing of sheets , as directed by GAIL. Payment shall be made in Sqm for the finished work in superficial area in the general plane of roof.

Providing and fixing white vitreous china urinal: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

OIL BOUND DISTEMPERING ON OLD WORK:- Distempering with oil bound washable distemper of approved brand and manufacture (ASIAN/BERGER) to give an even shade Old work (two or more coats). Item includes Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

WEATHER PROOF CEMENT PAINT:- Finishing walls with water proofing cement paint (ASIAN/BERGER/APEX Pinats)of required shade Old work (two or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. Item include surface preparation & applying one coat of cement primer before applying the paint on the old work. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

POLYURETHANE PAINT WITH INTERMEDIATE EPO:- "POLYURETHANE PAINT WITH INTERMEDIATE EPOXY PAINT & PRIMER AS PER PAINTING SPECIFICATION NO. S-1 WHICH INCLUDES COMPLETE SURFACE PREPARATION, APPLYING OF one coat High solid polyamine cured epoxy primer paint.(self priming mastic)DFT 75-100 microns, one coat of Two component polyamide cured Epoxy High build coating- DFT 100-125 microns, 1 coat of two component acrylic-polyurethane finish paint- DFT 50-60 microns etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PAINTING WITH ALUMINIUM PAINT CHAIN LINK:- Painting with aluminium paint of silver colour to give an even shade in Chain link fencing/ Barbered wire fencing including metallic supports if any, of SV/RR/IP & Terminal stations. Two or more coats at old surface including cleaning and sand papering and applying primer wherever required. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

ECO SOLVENT VINYL printing:- ECO SOLVENT VINYL printing with matt/gloss lamination in different sizes as per EIC instruction and stckering of same on existing surfaces.

Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe:- Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level, In All types of Soil/Rock

Supply and installation of New Handpump:- Providing and installation of India mark II deep well hand pump with followings:-a) C.I. Cylinder (1 No.)b) G.I. Link rod (10 Nos.-12mm dia -3 meter length mt.)c) 32mm dia GI pipe class-B 10 Nos. each of 3 mtrs. Length and also minor accessories etc.complete as per unicef instructional manual and upto the satisfaction of EIC.

Providing & Fixing 12mm Dia. G.I. Link rod of 3m length (if required)

Providing & Fixing 32mm dia G.I. Raiser pipe of class 8 of 3m length (if required).

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia:- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

Supply & Fixing of 2 H.P. Single Phase :- Supply & Fixing of 2 H.P. Single Phase PLUGA / TEXMO / KIRLOSKAR Make submersible pump , size 32mm , Head 171 Mtr. Including all complete electrical & Mechanical fittings , wiring , Starter ( L&T / GEC / Bajaj / Schneider Electric make) equivalent to the above pump

32mm Dia HDPE Pipe 10 kg/cm2, ISI BRAND

12 mm PVC Rope ISI

10mm , 3 Core Copper Cable ISI ( Finolex/ United/ Anchor / National Make )

Supplying and placing H.D.P.E. tank for all floor levels inlcudingnecessary connections (fittings shall be paid separetely) complete (I S I. )

Providing and fixing HDPE / GI Pipes complete with fittings andclamps,including cutting and making good the walls etc(Internal work / External work) a) 25 mm Nominal bore as per direction of EIC

Description of Work / Item(s)

Amount

Earth filling from brought out earth:- (excluding rock) in trenches, open pits, over pipeline trenches etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering to any lead and lift etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline

Empty HDPE cement bags filled with cement and sand:- Providing and laying in position empty HDPE cement bags filled with cement sand in the ratio 1:10 (1 cement:10 coarse sand), after stitching/sewing of bags with nylon thread, handling, placing & watering etc. complete as directed by Engineer-In-Charge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). Item include cost of the material, transportation, all resource, royalty etc. complete in all respect

Empty HDPE cement bags filled with earth:- Providing and laying in position empty HDPE cement bags filled with earth after sewing the bag, including placing, handling, watering as directed by Engineer-InCharge at washout sites along the pipeline (approx. 28 Nos. of bags will be required to be laid for one Cu. mtr of volume). The item shall be paid as per compacted volume measured at site. Item include cost of the material, transportation, all resources, royalty etc. complete in all respect.

SUPPLY & FILLING OF COARSE SAND:- Supplying and filling in plinth with Jamuna sand/Grade Zone-III under floors, including watering, ramming, consolidating and dressing complete in all respect as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete including with required resource, tools & tackles to complete the work in all respect (without any extra cost)

EXCAVATION AND OR BACKFILLING IN ALL KIND OF SOIL:- Earth work in excavation over areas by manual/mechanical means (Hydaullic Excavator) as and when required as per site condition to required length , width and depth including backfilling/disposal of excavated earth, with all lead & lift, disposed earth to be leveled and neatly dressed including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking as per drawings, specification & direction by EIC & upto satisfaction of EIC (including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc.) all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost). In all kind of soil.

Repainting Warning Sign board refer (DRG-001) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge.

Repainting Direction Marker refer (DRG No.-002) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Kilometer Marker refer (DRG No.-003) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Arial Marker refer (DRG No.-004) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Boundary Pillar refer (DRG No.-005) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Navigable Warning Board (DRG No.-0060) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Repainting Vent & drain pipe refer (DRG. 007) : Repainting (minimum 2 coats) & relettering of existing various types of markers with ready mixed synthetic enamel paint of approved brand over a coat of red oxide / zinc chromate primer over steel surface & cement primer over concrete surface after removing loose old paint, all rust, oil bound dust etc by scrapping, sand papering, using rust free paint remover & proper surface preparation. The item includes complete cost of paint removal (whenever required) surface preparation repainting including material (paint, primer etc.), all resources, transportation & re lettering on the markers as per the drawings issued and refitting of marker with proper grouting to the satisfaction of Engineer-in -charge

Installation of uprooted existing markers/ boards at the existing or designated location / chainage including excavation for foundation, PCC grouting with 1:2:4 cement concrete, laying in postion by shuttering, centering etc backfilling, disposal of surplus soil, old PCC material , minor rectification like straightening bent pipes, plates etc. as applicable. The item includes cost of materials, consumables, all resource, tools & transportation. As per drawings issued & satisfaction of EngineerIn-Charge

Supply & Installation of Warning Sign board refer DRG-001 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Direction Marker refer DRG No.-002 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Kilometer Marker refer DRG No.-003 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Aerial Marker refer DRG No.-004 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Navigable Warning Board DRG No.-006 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Supply & Installation of Installation of Vent/Drain pipe DRG. 007 : Supply & Installation of various types of markers as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge.

Precast ROU boundary marker: Supply & Installation of precast ROU boundary marker as detailed herein at designated location/chainage, including fabrication from steel as per drawing & specification, applying a primer coat of approved red oxide zinc chromate primer transportation upto the work site, excavation in foundation, concreting as per drawing/spec, backfilling, painting & lettering of markers by using approved brand of paint & disposal of surplus materials. The item includes supply cost of all the construction materials, consumable, fabrication work, transportation, all resource charges, cost of primer, paint tools which are required for complete work as per the drawing notes, specifications & satisfaction of Engineer-In-charge (Refer to drawing No. 005)

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 25 M x 25 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx size 50 M x 50 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

HOUSE KEEPING & CLEANING OF TERMINALS/SV/RR/IP STATION (Approx Size 100 M x 100 M): Providing all resource along with cleaning materials and tools viz Mops and Squeegees, Microfiber Cloth, Abrasives, Dustpan and Brushes, Brooms, Buckets and Bowls etc for cleaning of installations/terminals and Weed Cutters, Grass Trimmer, Pruning shears, Pruning Loppers, Handsaw Or Chainsaw etc for cutting of grass/ herbs, trimming & dressing of tress/ branches includes all consumables, removing and disposal of the garbage outside of the installations / terminals at least 50 meter away from the boundary of the premises/ or designated area on monthly basis as per scope of work to the satisfaction of EIC

Minor Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. all resource, material along with associated transportation shall be in the scope of contractor.

Major Maintenance of Hand/Submersible Pump:- Repairing of existing hand/submersible pump by dismantling the old existing pump i.e. pulling out the GI pipe and lowering again after checking/ repairing to the original position. NRV, washers etc if found defective, shall be replaced with new. Defective GI pipe shall be replaced with good quality GI/PVC pipe with necessary hardware. If required additional boring depth upto 300 ft. shall also be increased along with putting new GI pipes hardware to make the hand pump in good working condition. all resource, material consumables etc along with associated transportation shall be in the scope of contractor.

Supply of nitrogen gas in cylinders

ROU ENCROACHMENTS HANDLING & FRONT CLEARING:- Providing assistance for the removing encroachment of ROU as per direction of GAIL which includes coordination with encroachers for the removal at initial level, coordination with the concerned authority for the removal of encroachment, charges for the transportation, boarding & lodging etc also if required as per situation.

FABRICATION, SUPPLY & ERECTION OF STEEL STRUCTURES:- Work at site in built up section in RS joists i.e. angles, channels, tee, pipes, flats, I beams, chequered plats, sheets etc. for cross overs, platforms, stands, pipe supports & similar structures, GI cable trays, nuts bolts, washers etc. including cutting, welding & fixing in position at site as per scope of works & direction of E-I-C

DISMANTLING OF STRUCTURE STEEL: Dismantling of steel structure, as per instructions of engineer in-charge, including gas cutting, removal from site, unbolting , shifting the same to the GAIL's designated store/yard or Pipeline installations as per the instruction of engineer-in-charge.

COATING REPAIR:- Coating repair using Cold Applied tapes (Inner wrap, Outer wrap and primer)/PERP-patch application system supplied by GAIL (Primer, Inner wrap and Outer wrap) (Area shall be final surface area of pipeline including primer, Inner wrap and Outer wrap)

PROVIDING EQUIPMENTS ON HIRE - Excavator cum Loader - JCB (1400 Kg bucket / 1.1 Cum loader capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Pick and carry crane - Hydra (14 Ton Capacity) : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Engine Driven Dewatering Pump Set : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Portable Generator 3 KVA with lighting facilities ( 04 nos of 400 W HPSV) along with necessary fittings : Providing equipments on rental including operator and consumables including fuel, transportation, Boarding, Lodging, fooding etc. complete on Day (8 Hrs) or Hourly basis (Time considered for payment purpose shall be equipment availability time at site excluding transportation / breakdown time if any)

PROVIDING EQUIPMENTS ON HIRE - Providing tractor trolley of standard capacity or more including supplying of 3 all resources for loading unloading the articles, necessary operators, all resourceers and fuel etc. for Carriage /Disposal of material or other purposes by tractor trolley within/around premises of Plant or RoU of any lead as directed by EIC. Payment on Pro rata rate basis in multiple of half day

PROVIDING SERVICES ON HIRE - Pipe Fitter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Rigger : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Qualified (CS) Pipe Welder/Cutter

PROVIDING SERVICES ON HIRE - Mason/ Carpenter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Plumber/ Painter : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING SERVICES ON HIRE - Helper/Labour : Providing Services on hire in the following categories complete on Day (8 Hrs) or Hourly basis with necessary tools-tackles, consumable, accessories etc. (other than special (non sparking) tools

PROVIDING & LAYING PCC 1:2:4 : Providing and laying PLAIN CEMENT CONCRETE of Nominal Mix 1:2:4 by mass (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc. or any other works etc. including cenering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING RCC 1:1.5:3 : Providing and laying REINFORCED CEMENT CONCRETE of Design/Nominal Mix 1:1.5:3 by mass (1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregates/Gravels) with 20 mm and down nominal size graded crushed stone aggaregates/Gravels for all various location above and below the plinth level in foundation, substructure & superstructure etc.or any other works etc. including centering & shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete. as per drawings, specification & direction by EIC & upto satisfaction of EIC. all complete with including required material, all resource, tools & tackles to complete the work in all respect (without any extra cost). ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

REINFORCEMENT FOR RCC Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

DEMOLISHING CEMENT CONCRETE:- Demolishing CEMEMT CONCRETE/RCC WORK (taking all necessary safety precautions) for all depth below plinth & heights above plinth level by mechanical means including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

BRICK WORK IN CEMENT MORTAR (1 CEMENT : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 below & above plinth level in foundation, substructure & superstructure etc. in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).ALL MATERIALS INCLUDING BRICK, CEMENT SUPPLIED BY THE CONTRACTOR.

DEMOLISHING BRICK WORK : Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead.

15MM THICK CEMENT PLASTER: 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. Item also Include the removal of existing plaster if required. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

PROVIDING & LAYING CC FLOORING (40MM) Providing and laying average 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry etc.all complete. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

PROVIDING & LAYING CC PAVER BLOCK: Providing and laying factory made chamfered edge Cosmic Cement Concrete Paver Blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer#s specifications & direction of Engineer -in-Charge: 60 mm thick c.c. paver block of M-30 grade with approved color design and pattern inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth.

TAKING OUT EXISTING PAVERBLOCKS & REFIXING THE SAME :- Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand (jamuna sand), filling the joints with fine sand etc. inclusive cost of Separation Membrane of impermeable plastic sheeting 125 micron thick shall also be provided under the sand bedding layer to aviod vegetation growth all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be carefully taken out and relaid). including all material. with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

SUPPLY & FIXING OF GLASS PANES 3 to 4 mm : Renewing glass panes, with putty and nails wherever necessary with glass panes. Supply and fixing of the Window Glass panes 3 to 4 mm thick as per requirement with good quality glass putty, nails/clips. Glass, glass-putty, nails/clips and any other required consumable, resource, transportation of material are in the scope of Contractor. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

SUPPLYING & FIXING PVC FLOORING : Supply & Fixing 3 mm(± 10%) thick PVC Flooring of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC Flooring should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & FIXING ACID TILE: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS :4457, complete as per the direction of Engineer-in- Charge. In flooring. dado/skirting etc places on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.ALL MATERIALS INCLUDING Acid & Alkali Resistant Tile SUPPLIED BY THE CONTRACTOR.

CLEANING OF ROU: Clearing of wide ROU Strip jungle including cutting & uprooting of rank vegetation, grass, brush wood, trees and saplings of all girth & height above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the ROU Limit area cleared as per drawings, specification & direction by EIC & upto satisfaction of EIC all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).

RCC HUME PIPE -150MM DIA : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes of 150 mm Nominal Diameter, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, at specified Pipe line ROU site. Normal Length required of each pipe is 2.5 metres.etc. all complete.with including all required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

PVC Pipe- 110/75 MM Dia: Providing of PVC pipes (dia 110/75 mm) approved make (ISI mark) as per direction of EIC including required solution for fixing etc. complete.

PROVIDING & LAYING CONCENTRINA COIL:- Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron #Y# shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

PROVIDING & FIXING CHAIN LINK FENCING Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge

FIXING OF CHAIN LINK FENCING TO MS ANGLE Fixing Chain link fencing to M.S. angle posts with GI wire (New wire will be provided as per direction of EIC with reference to the old not workable wire), hooks etc. complete wherever required as per directions of EIC (Chain link fencing will be supplied by GAIL) wire 6 gauge minimum three rows, hooks etc.complete.

WHITE WASHING WITH LIME ON OLD WORK: White washing with lime to give an even shade at old work with minimum two or more coats. Item include Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

SYNTHETIC ENAMEL PAINTING : Painting on G.S. sheet/STRUCTURE with synthetic enamel paint of approved brand and manufacture (Asian/Berger/Nerolac) of required colour to give an even shade. New work (two or more coats) including a coat of approved steel primer.all complete with including all required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC/SIC.

LETTERING - 1" to 4": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 1" to 4" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 4" and up to 8" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 4" to 8" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 8" and Up to 12": Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 8" to 12" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource etc required for complete the lettering work in all respect.

LETTERING - Above 12" : Lettering with synthetic enamel paint of approved brand (Asian/Berger/Nerolac) / make/colour of letter sizes between 12" to 24" at SV/IP/RR & Terminal piping, equipment and structure as per the direction of EIC . The item includes cost of material and all resource required for lettering complete )

PROVIDING & LAYING VETRIFIED TILE :- Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints with white cement & matching pigments etc. complet. Size of Tiles 600 mm * 600 mm * 10 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & FIXING 12MM THICK COMMERCIAL PLY :- Providing and fixing 12mm Thick Commercial Ply conforming to IS : 1328 BWR type including biddings/plain lining with necessary screws/nuts & bolts/ nails,including a coat of approved primer on one face, and fixed on wooden /steel frame work, at various locations like RR stations etc.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & LAYING GRANITE STONE SLABS (20MM) : Granite stone slabs in flooring, counters, treads etc.(perfectly levelled) over and including 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

SUPPLYING & FIXING RADIUM PRINTING :- Supply & Fixing 2 mm thick Radium Printing of specified shade colour on any surfaces (like the mettal bords, Acrylic sheet, wall etc.) with good quality adhesive(including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC. The radium writing with base with use of multi colours and computerized flow chart should be done as per direction of EIC . The radium should be of standard quality having weather resistant for a period of at least 5 year

SUPPLYING & FIXING SUN FILM:- Supply & Fixing of 1 mm thick Sun Film of specified shade colour on any surfaces with good quality adhesive (including cleaning the surface of all dirt, seals, oil, grease and foreign material etc.) .all complete with including required resources, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.The PVC should be of standard quality having weather resistant for a period of at least 5 year.

PROVIDING & LAYING CERAMIC TILE (300mm x 300mm x 8mm ) : Providing and laying rectified Glazed Ceramic, matt-finished,non slip type tiles of approved make & shade at floors, skirting, wall, dado or anywhere places etc. including cleaning the finished surface with oxalic acid, wax polishing 300mm x 300mm x 8mm (+5%) thick tiles of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE.

EXTRA FOR ROUND NOSING /MOULDED EDGE TO MARBLE / GRANITE : Extra for round nosing/moulded edges (as per approved design) to marble/granite stone slabs .all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

EXTRA FLORRING /SKIRTING /DADO ITEMS : Extra over marble/ kota stone flooring/ skirting/ dado items for providing mirror polishing (in place of normal polishing) by grinding machine (suitable for mirror polishing) comprising of multiple grindings up to 6 nos. with carborundum stone (in descending order of hardness of grinding stone), one no. grinding with Italian grinding stone and one no. grinding with foam buffer set and polishing with Teno-oxide granite powder etc. all complete to give a smooth and mirror-like shining surface.all complete etc. with including required resource, tools & tackles to complete the work in all respect (without any extra cost) as per drawings, specifications & direction by EIC & upto satisfaction of EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR's SCOPE

PROVIDING & FIXING WHITE VITREOUS CHINA:- Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

RENEWAL OF OLD PUTTY OF GLASS PANNES:- Renewal of old putty of glass panes (length). all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & APPLYING ROOF WATERPROOFING:- Providing and applying Acrylic base flexible liquid applied Membrane system of approved make for roof insulation and waterproofing. All works shall be carried out as per specifications and manufacturer's instructions including all byeworks and at all heights and levels and also as per the directions of the Engineer Incharge.

PROVIDING & FIXING FALSE CEILING:- Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm,both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm * 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive)and electro statically polyester powder coated of thickness 60 microns (min), including factory painted after bending.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PROVIDING & FIXING CPVC PIPE:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & all fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm to 150 mm nominal outer dia Pipes with all fittings & accessories.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

Anodised Aluminum Window Frame: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Aluminium Composite Panel(ACP) Sheet 4mm:- Aluminium Composite Panel (ACP) Sheet 4mm in various sizes fro fixing in aluminium window/Door frame or for display board purpose.

P&F Precoated GS sheet:- Providing and fixing pre-coated G.S. Sheet (COLOUR COATED) 0.50 mm thick in roofing of approved colour, brand and manfacturer including P/F ridges curve sheets at ends & flashing etc. and necessary fashners as recommended by the manufacture and as per site requirements (The item includes removal of damaged/ existing sheet, wherever required and fixing / placing of sheets at all heights). Crane may be provided by GAIL, (if available) without any charge for fixing / placing of sheets , as directed by GAIL. Payment shall be made in Sqm for the finished work in superficial area in the general plane of roof.

Providing and fixing white vitreous china urinal: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

OIL BOUND DISTEMPERING ON OLD WORK:- Distempering with oil bound washable distemper of approved brand and manufacture (ASIAN/BERGER) to give an even shade Old work (two or more coats). Item includes Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC

WEATHER PROOF CEMENT PAINT:- Finishing walls with water proofing cement paint (ASIAN/BERGER/APEX Pinats)of required shade Old work (two or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. Item include surface preparation & applying one coat of cement primer before applying the paint on the old work. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

POLYURETHANE PAINT WITH INTERMEDIATE EPO:- "POLYURETHANE PAINT WITH INTERMEDIATE EPOXY PAINT & PRIMER AS PER PAINTING SPECIFICATION NO. S-1 WHICH INCLUDES COMPLETE SURFACE PREPARATION, APPLYING OF one coat High solid polyamine cured epoxy primer paint.(self priming mastic)DFT 75-100 microns, one coat of Two component polyamide cured Epoxy High build coating- DFT 100-125 microns, 1 coat of two component acrylic-polyurethane finish paint- DFT 50-60 microns etc. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

PAINTING WITH ALUMINIUM PAINT CHAIN LINK:- Painting with aluminium paint of silver colour to give an even shade in Chain link fencing/ Barbered wire fencing including metallic supports if any, of SV/RR/IP & Terminal stations. Two or more coats at old surface including cleaning and sand papering and applying primer wherever required. all complete with including required resource, tools & tackles to complete the work in all respect (without any extra cost).as per drawings, specification & direction by EIC & upto satisfaction of EIC.

ECO SOLVENT VINYL printing:- ECO SOLVENT VINYL printing with matt/gloss lamination in different sizes as per EIC instruction and stckering of same on existing surfaces.

Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe:- Boring/drilling bore well of 200-400 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level, In All types of Soil/Rock

Supply and installation of New Handpump:- Providing and installation of India mark II deep well hand pump with followings:-a) C.I. Cylinder (1 No.)b) G.I. Link rod (10 Nos.-12mm dia -3 meter length mt.)c) 32mm dia GI pipe class-B 10 Nos. each of 3 mtrs. Length and also minor accessories etc.complete as per unicef instructional manual and upto the satisfaction of EIC.

Providing & Fixing 12mm Dia. G.I. Link rod of 3m length (if required)

Providing & Fixing 32mm dia G.I. Raiser pipe of class 8 of 3m length (if required).

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia:- Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

Supply & Fixing of 2 H.P. Single Phase :- Supply & Fixing of 2 H.P. Single Phase PLUGA / TEXMO / KIRLOSKAR Make submersible pump , size 32mm , Head 171 Mtr. Including all complete electrical & Mechanical fittings , wiring , Starter ( L&T / GEC / Bajaj / Schneider Electric make) equivalent to the above pump

32mm Dia HDPE Pipe 10 kg/cm2, ISI BRAND

12 mm PVC Rope ISI

10mm , 3 Core Copper Cable ISI ( Finolex/ United/ Anchor / National Make )

Supplying and placing H.D.P.E. tank for all floor levels inlcudingnecessary connections (fittings shall be paid separetely) complete (I S I. )

Providing and fixing HDPE / GI Pipes complete with fittings andclamps,including cutting and making good the walls etc(Internal work / External work) a) 25 mm Nominal bore as per direction of EIC

M/S JYOTI ENGINEERING

PN RATHI

Ravindra Construction Company

ABIRAM CONSTRUCTION COMPANY

M/S JYOTI ENGINEERING

ABIRAM CONSTRUCTION COMPANY

M/s.Mitra Contractors

PN RATHI

ABIRAM CONSTRUCTION COMPANY

Ravindra Construction Company

M/s.Mitra Contractors

PN RATHI

M/S JYOTI ENGINEERING

PN RATHI

Ravindra Construction Company

ABIRAM CONSTRUCTION COMPANY

M/S JYOTI ENGINEERING

ABIRAM CONSTRUCTION COMPANY

M/s.Mitra Contractors

PN RATHI

ABIRAM CONSTRUCTION COMPANY

Ravindra Construction Company

M/s.Mitra Contractors

PN RATHI