Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | L1 | Accepted-AOC Lowest rate and hence the work is awarded to the Contractor vide Resolution No.3(2) dtd.21-08-2025 of Areacode Block Panchayat | |
| 2 | L2₹4.2 L+₹17,766.29 (4.45%)Rejected-AOC | L2 | Rejected-AOC Higher rate hence rejected |
| Sl No | Description | Qty | Unit | CALICUT AIRPORT LCCS. LTD. L2 | MPB L1 |
|---|---|---|---|---|---|
| 1.00ROAD RENNOVATION | |||||
| 1.00 | OD186988/2025-2026:[OD from DAR 2.28.1] - Surface dressing of the ground including removing vegetation and in?equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5m. All kinds of soil | 240 | sqm | 33.22 ₹7,972.8 | 30 ₹7,200 Lowest |
| 1.00 | OD195919/2025-2026:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and manual compaction to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material | 18 | cum | 2,981.33 ₹53,663.94 Lowest | 3,000 ₹54,000 |
| 1.00 | OD195932/2025-2026:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification
(i) Nominal mix (1:2:4) | 28.8 | cum | 8,314.01 ₹2,39,443.49 | 8,200 ₹2,36,160 Lowest |
| 1.00 | 5.5.B.2a:Modified Penetration Macadam 75 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. <br> (B) 75 mm thick :- (II) Bitumen (S-65) | 18.75 | sqm | 376.21 ₹7,053.94 | 340 ₹6,375 Lowest |
| 1.00 | 5.5.A.1a:Modified Penetration Macadam 50 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | 33 | sqm | 290.85 ₹9,598.05 | 260 ₹8,580 Lowest |
| 1.01 | 5.2.1a:Tack Coat<br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 341 | sqm | 13.51 ₹4,606.91 | 12 ₹4,092 Lowest |
| 1.01 | 5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means :- Type A (II) Bitumen (S-65) | 341 | sqm | 271.04 ₹92,424.64 | 240 ₹81,840 Lowest |
| 1.01 | OD186990/2025-2026:Providing and fixing NAME BOARD with 18 mm thick gang saw cut, mirror, polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,
facias and similar locations, of required size, approved shade, colour and texture laid over 20
mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab upto 0.50 sqm | 0.42 | sqm | 5,475.04 ₹2,299.52 | 2,500 ₹1,050 Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,593
Closing Date
19 Aug 2025, 10:00 amClosed
Assistant Engineer
Office of the Assistant Executive Engineer, LID and EW Sub Division Areacode Block Panchayat
Annual Plan-AREEKODE BP - 2025-26 PROJECT NO.91 Puliyakkode Schoolpadi Road Improvement in Kuzhimanna Grama Panchayath-Road improvement-General Civil Work
2025_LSGD_784940_5
AEE/LSGD/AKD SD/TENDER-02/2025-26
Open Tender
Civil Works - Roads
Item Rate
180 days
Areacode Block Panchayath
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,593
Yes
15 Oct 2025
12 Aug 2025
20 Aug 2025
12 Aug 2025
19 Aug 2025
12 Aug 2025
12 Aug 2025 - 19 Aug 2025
Amount
ROAD RENNOVATION
OD186988/2025-2026:[OD from DAR 2.28.1] - Surface dressing of the ground including removing vegetation and in?equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5m. All kinds of soil
OD195919/2025-2026:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and manual compaction to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material
OD195932/2025-2026:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)
5.5.B.2a:Modified Penetration Macadam 75 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. <br> (B) 75 mm thick :- (II) Bitumen (S-65)
5.5.A.1a:Modified Penetration Macadam 50 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
5.2.1a:Tack Coat<br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means :- Type A (II) Bitumen (S-65)
OD186990/2025-2026:Providing and fixing NAME BOARD with 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
CALICUT AIRPORT LCCS. LTD. (BID ID -2294872)
Bidder Name
CALICUT AIRPORT LCCS. LTD.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1289821.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .