Thakurbari to Ghoiralee Factory connecting Road

Amount

Construction of sub-grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 (including compansation of earth) (a) Private land.

Interlocking Concrete Block a) Providing and laying Interlocking Concrete Block Pavement-(M-40) having thickness 80mm as per Technical Specification clause 1504 complete including carriage(Inclusive Edge restraint and carriage) (rate in inclusive of 12% GST 1% LWC & 0.50% SWATCH BHARAT)

Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of specified quantity using mechanical means.)( Including cost of testing of materials at site and laboratory as directed by the deptt.) I. with bitumen emalsion-CSS- 1h

Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.) (c) (b) dry & hungry bituminous surface

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixedwith bituminous binder@ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (As per analysys-3) ( Including cost of testing of materials at site and laboratoryas directed by the deptt.) ( Including extra lead beyond 5.00 km for carriage of materials from quarry toplant site and exrtra lead beyond 10.00Km from Plant site to Laying site.) (a)'with VG-30 grade bitumen

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder@ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel andalignment, rollingwith smooth wheeled,vibratoryand tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (as per analysys-3 ( Including cost of testing of materials at site and laboratory as directed by the deptt. )( Including extra lead beyond 5.00 km for carriage of materials from quarry to plant site and exrtra lead beyond 10.00Km from Plant site to Laying site.) (a)'with 60/70 or VG-30 grade bitumen (ii) for grading-II )13mm nominal size)

Providing and fixing retro reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 8o1.3, fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx 45cm x60cm, 60cm below ground level as per approved drawing. i)60 CM equilatreral tringle

ii)60CM Circular

iii) 80cm x 60 cm rectangular

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 i)5th Kilometer Stone (Precast)

ii)Ordinary Kilometer Stone (Precast)

iii)200 m stone (precast)

Providing Hump Type Speed Breaker Complete as per Drawing and Technical Specification.

Providing Reflective Pavement Marker with a provision of spike at the bottom with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRTH & H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year.

SRI.LALIT KUMAR AGARWALLA