Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹19.5 L+₹1.4 L (7.98%)Rejected-Finance H NO 266 V P O PILKHANI DISTT AMBALA 133104 | AMBALA | HARYANA | 133104 | L2 | Rejected-Finance Rejected being | |
| 3 | L3₹19.7 L+₹1.6 L (8.92%)Rejected-Finance 33 A DURGA NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Rejected being | |
| 4 | L4₹22.7 L+₹4.6 L (25.5%)Rejected-Finance | L4 | Rejected-Finance Rejected being | |
| 5 | L5₹23.3 L+₹5.2 L (28.8%)Rejected-Finance | L5 | Rejected-Finance Rejected being |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
25 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) AMBALA CANTT
GE (N) AMBALA CANTT
CA NO GE(N)AMB-10/2024-25 PERIODICAL SERVICES TO CERTAIN MD ACCN OF AGE B/R-I (NORTH) UNDER GE (N) AMBALA CANTT
2024_MES_648559_1
GE(N)/AMB-10/2024-25
Open Tender
Civil Works
Item Rate
330 days
GE (N) AMBALA CANTT
As per tender documents
9 documents required · 9 mandatory
₹500
GE (N) AMBALA CANTT
₹50,000
Yes
22 Jul 2024
30 Mar 2024
27 May 2024
30 Mar 2024
25 May 2024
10 May 2024
30 Mar 2024 - 10 May 2024
Amount
Material and labour exposing reinforced bar from RCC member of building, manually or mechanically by cutting, chipping and removing damaged, loose and de-bonded concrete/ plaster, at any height complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for ready mix plaster on brick work or concrete surfaces, faces/edges of chajjas/lintels/ beams, etc. ( any height) finished even and smooth complete all as specified and as directed by the Engineer-in-Charge.
Dismantling of reinforced brickwork in slabs supported on walls, beams and columns in floors, roof, landings, balconies, chajjas and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. complete all as specified and as directed by the Engineer-in-Charge
Material and labour for rendering 15 mm thick on brick work or concrete wall surfaces in patches( Area not exceeding 2.00 sqm) in cement mortar 1:4 including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge. ( Note- The cost of providing WPC shall be included in quoted rate under this item )
Material and labour for rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4 including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge. ( Note- The cost of providing WPC shall be included in quoted rate under this item )
Material and labour for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rendering 05 mm thick on fair faces of brick work or concrete ceiling surfaces, chajjas, etc. in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine stone aggregate of size between 6 to 12 mm as per the texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of chalk whitening complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of walls, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of ceiling, chajjas, roof projection complete all as specified and as directed by the Engineer-in-Charge.
Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of wall by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash on prepared surfaces of wall etc. complete all as specified and as directed by the Engineer-in-Charge.
Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the wall, pillars, cornices etc complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper with painting roller over prepared surfaces of walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash on prepared surfaces of ceiling etc. complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any number of layers) using appropriate technique as approved by EIC for complete removal of all layers of old treatment and reaching upto old plastered surface of walls, pillars, cornices, etc., filling all holes and cracks with white cement based wall care putty and applying two coats of cement base paint over a coat of primer complete, all as specified and as directed by the Engineer-in-Charge. Note- The quoted rate include cement base painting on walls, pillars, chajjas, cornices, etc. upto 7.5 metre height or double storey.
Material and labour for complete removal of existing treatment (any number of layers) using appropriate technique as approved by EIC for complete removal of all layers of old treatment and reaching upto old plastered surface of walls, pillars, cornices, etc., and applying two coats of oil bound distemper with painting roller over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any number of layers) using appropriate technique as approved by EIC for complete removal of all layers of old treatment and reaching upto old plastered surface of ceiling and applying three coat of white lime wash complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of old decorated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for applying 1 to 2 mm thick wall care putty white cement based in two or more coats on old/new plastered surface to achieve smooth surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any number of layers) on brick/concrete, plastered / un--plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of alkaline resistant primer with painting roller over prepared surfaces complete all as specified and as directed by the Engineer-in-Charge. Note- The quoted rate include exterior acrylic emulsion paint on walls, pillars, chajjas, etc. upto 12 metre height or double storey.
Material and labour for cutting and uprooting of tree roots and unwanted vegetations on roof and wall surfaces (Area exceeding 1.00sqm and not exceeding 3.00sqm) by digging safely in concrete roof or brick wall and pouring acid or approved chemical to avoid further growth of roots and making good the surfaces by filling cracks and disturbed portion in cement mortar (1:3) or PCC 1:2:4 type B-0 (using 12.5mm size crushed stone aggregates) without using extra cement, including if required, taking down rain water pipe/soil waste pipe of any size and description and refixing in the same location complete all as specified and directed by the Engineer-in-Charge.
Demolition and breaking up drain pipes 75/100/110 mm dia, SGSW, AC, PVC, reinforced concrete pipe including fittings, in any position complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed by the Engineer-in-Charge..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
Fixing only 110mm dia UPVC, soil waste/ drain pipe in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed by the Engineer-in-Charge..(Note- The serviceable rain water pipe obtained from Serial item No- 31 will be used after cleaning )
Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing 350mm long, ‘C’ shaped MS clamps made out of flat iron 40x3mm fixed on wall with 2Nos, 10mm dia 100mm long fastener including two coat of synthetic paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing as in repair stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel screws to steel windows and using tack cut black nails for wooden frame complete all as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for sheet glass 4.0mm thick ordinary quality in square exc 0.5 sqm in each pane fixed to glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified by the Engineer-in-Charge.
Supply and fixing 3mm thick glass ground or obscured or frosted on one side, in square not exceeding 0.5 Square metre each pane fixed to glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified by the Engineer-in-Charge.
Supply and fixing shear connectors of 8mm dia by drilling 12mm dia holes, 50mm deep 500mm C/C , cleaning the holes by blower pump or water injector and filling holes using Likfix ‘S’ polyester resin based grout manufactured by Forsoc chemicals or equivalent as approved by GE, complete all as specified and as directed by the Engineer-in-Charge.
Note:- Amount of credit of Rs. 8,550.00 for retrieved materials is mentioned in Schedule of Credit Page No. 114 (R) of tender documents in pdf form which will be deducted offline while acceptance of tender.
M/S Gurpreet Singh
shiv const co
MAYANK ENTERPRISES
JMB BUILDERS & ASSOCIATES
bhagwandasswazirchand
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .