GENERAL-GPS II-Garden-Providing Water Connection From Dam through Fisheries Occupied area-General Civil Work

Amount

Pipeline

56.12.b:Total station surveying and preparation of site plan - Plain built up area with hindrance to line of sight due to buildings/structures.

OD28296/2025-2026:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

OD28291/2025-2026:110mm dia - Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 110mm Outer Dia including cost of material,conveyance etc

OD28309/2025-2026:110mm Dia - Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 110mm Nominal Outer Diameter Pipes.

OD28304/2025-2026:90mm dia - Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 90mm Outer Dia ncluding cost of material,conveyance etc

OD28295/2025-2026:90mm dia - Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 90mm Nominal Outer Diameter pipes.

OD28300/2025-2026:Supplying and fixing Kirloskar/Equivalent 300 mm cast iron valve PN1.6 flanged FF GEAR operated for supply of water connection with stainless steel screws

OD28294/2025-2026:Engaging the diving team for underwater inspection and to remove the valve setup for installing the new valve arrangement including cost of all wage to divers, rent of their instruments and safety equipment's, conveyance, cost of establishment at site etc complete

18.72.19:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:300 mm dia Ductile iron Class K-9 pipes

OD28299/2025-2026:Supply and fixing of fabricated strainer 300mm dia including the cost of material, labour,conveyance, etc. complete.

OD28306/2025-2026:Supply of dia 12" slip-on flange.

OD28305/2025-2026:Conveying and fixing gate valves by providing bolts, nuts, rubber insertions, etc., complete, but excluding the cost of the valve (tail pieces, if required , will be paid separately): 300mm diameter , Class I.

OD28308/2025-2026:Supply and fitting of 110mm dia of HDPE pipe fittings and accessories including cost of material,conveyance etc

OD28293/2025-2026:Welding charges for fixing additional DI flanges to DI pipe with suitable welding rod including cost of labour, machinery, consumables, incidental and handling charges etc. complete but excluding material already supplied.

OD28301/2025-2026:Labour charges for cutting 300mm DI pipe diametrically, the cut being perpendicular to the axis of pipe with steel saw and smoothening of the cut end etc. complete.

OD28298/2025-2026: Supply and Installation of 12 inch to 8 inch Cast Iron Concentric CI Double Flange Reducer

OD28290/2025-2026:Supply and Installation of 8 inch to 4 inch Cast Iron Concentric CI Double Flange Reducer

OD28302/2025-2026:Supplying and fixing Kirloskar/Equivalent 8"inch/200mm Cast Iron ISI 14846 Sluice Valve PN1.6,Double Flanged FF, IS 1538 Tbl 4&6 , Cast Iron BODY ,Cast Iron WEDGE ,Shaft :-SS410 ,Seat :Bronze, Wedge Ring :Bronze, Hand Wheel Operation for supply of water connection with stainless steel screws

OD28292/2025-2026:Supply and Fixing of 300mm Dia dismantling Joint for Cast Iron Pn 1.6 fanged Valve

OD28303/2025-2026:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work 110 mm dia nominal bore

OD28297/2025-2026:Supplying and fixing Kirloskar/Equivalent 4"inch/100mm Cast Iron ISI 14846 Sluice Valve PN1.6,Double Flanged FF, IS 1538 Tbl 4&6 , Cast Iron BODY ,Cast Iron WEDGE ,Shaft :-SS410 ,Seat :Bronze, Wedge Ring :Bronze, Hand Wheel Operation for supply of water connection with stainless steel screws

18.59.3:Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):100 mm dia

OD28307/2025-2026:Supply and installation of Gate Valve for HDPE Pipe ( 4 inch )

Concrete and allied works

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

22.23.1:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

OD28310/2025-2026:Supply,fixing and commissioning of new 1.5 hP single phase electrical centrifugal pump (self priming)

ASHIFUL HAK.C (BID ID -2371043)

Bidder Name

Kinanath V P

ASHIFUL HAK.C