ADDITION ALTERATION AND SPECIAL REPAIRS TO CERTAIN MARRIED ACCOMMODATION OF NASA AT INA EZHIMALA

Dismantling single layer of Mangalore pattern tiles including ridge in roofing complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering including aluminium frame complete all as specified and as directed

Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and as directed

Supply & fix Anodised aluminium frame for roofing tiles with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Material & labour roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

Material & labour, Excect roof tiles Mangalore pattern interlocking at side joints , laid dry complete all as specified and as directed.

Material & labour, ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 using water proofing compound all as specified and as directed.

Material & labour for preparation of new/old MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint over a coat of primer all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed.

Supply & fix steel work in tubular trusses (tubular, angle, square and rectangular etc ) including erection shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed.

Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed.

Material & labour Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level)all as specified and as directed.

Material & labour 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement all as specified and as directed.

Material & labour 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate.as in sub flooring rough finished surface complete all as specified and as directed.

Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set with or without spacers and jointed in neat cement slurry and pointed in white or coloured cement /epoxy to match the shade including 15mm thick screed bed in CM 1:6 all as specified and as directed.

Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises all as specified and as directed.

Material & labour for Glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete.

Material & labour granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite all as specified and as directed.

Material & labour granite slab (of any type) 20mm thick Granite (of any type) work (table rubbed and polished) in inside cupboard including groove cutting, steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and as directed.

Supply & fix GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and as directed.

Supply & fix 4mm thick E-board , multipurpose, decorative type,for ceiling purpose complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sqm but n.exc. 4 sqm each, with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames not exc. 1.5 sqm each, with shutters (without taking off shutters from the frames)

Supply & fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing all as specified and as directed.

Supply & fix factory made solid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing all as specified and as directed.

Supply & fix powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & fix Anodised aluminium door shutters for cupboard, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply & fix Anodised Powder coated of any color three track Aluminium sliding windows aluminium section weighing 0.55Kg/m incl necessary jointing cleats,glazing clips,ruber neoprene packing, incl 5.5 mm thick tinted/ frosted glass, stainless steel wire cloth of 0.36 mm nomial dia with aparture 1.40 mm ,anodised aluminium fittings such as locking arrangenment and suitable handle complete all as specified and as directed.

Supply & fix powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply & fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) for stair portion with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and as directed.

Supply & fix Sheet glass 4mm, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane all as specified and as directed.

Supply & fix in repairs aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples all as specified and as directed.

Supply & fix Framed work such as safety grills of any size including complete removal and fixed with necessary clit and fastners in the same opening all as specified and as directed.

Supply & fix Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc. complete all as specified and as directed.

Material & labour filling concrete inside frame in PCC 1:3:6, type C-0 using 12.5 mm graded stone aggregate all as specified and as directed.

Supply & fix pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.

Supply & fix Plain framed, panelled shutter 35 mm (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated - 2nd class HW rail & style all as specified and as directed

Supply & fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type both side all as specified and as directed.

Supply & fix 30mm thick 2nd class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I and as directed

Supply & fix 150mm anodized aluminium barrel tower bolt of extruded section all as specified and as directed.

Supply & fix in repairs 150mm extruded anodised aluminium alloy handles fabricated type all as specified and as directed.

Supply & fix in repairs floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door all as specified and as directed.

Material & labour for preparation of new or previously untreated wood based surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as directed.

Supply & fix in repairs for door seal with aluminium top and bottom fiber brush for glazed ,skelton and panelled door to stop germs,mosquito,snake from outer side(for size n exc 1.2mtr) complete all as specified and as directed.

Supply & fix in repairs 300mm long ordinary MS rat tail rod pattern springs including roller plate complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including raking out joints, hacking for key and scrubbing down with water all as specified and as directed.

Material & labour, 10mm thick rendering in CM 1:6 on wall surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Material & labour, 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair, complete all as specified and as directed. Note: water proofing compound shall be measured and paid separately

Supply only liquid waterproofing compund.

Material & labour, 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Dismantling cabinets boarding, any description, fixed in any position with Screws including all fittings all as specified and as directed.

Supply & fix 18 mm thick extruded polymer profile from board made of 'U' PVC polyster resin of any colour and pattern and having density of 0.65 g/cc used as in kitchen cabinets/wardrobes/ shutter/ Drawers etc fixing with drywall screws in required and shape including finishing the edges/exposed surfaces with PVC/ Sunmica lipping complete all as specified and as directed and as per manufacture's instructions all as specified and as directed.

Supply & fix PVC magnet catcher fixed with screws to wooden frames complete all as specified and directed.

Supply & fix stainless steel telescopic channel drawers slides(length n.exc 600mm) complete all as specified and as directed.

Supply & fix stainless steel closing hydraulic hinges for shutter complete all as specified and as directed

Supply & fix 75mm long SS handles, cast type, anodised all as specified and as directed.

Supply & fix Harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc.

Supply & fix 32mm dia PVC flexible waste pipe for /WHB/sink all as specified and as directed.

Taking down existing water proofing treatment of any description and removal rubbish off the premises, complete all as specified and as directed.

Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing Compound all as specified and as directed.

Material & labour for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges, complete all as specified and as directed.

Material & labour for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as in filling and mass concrete, roof slab padding preparatory to roof treatment, complete all as specified and as directed.

Material & labour, 10mm thick rendering in CM 1:3 on roof with water proofing compound surfaces finished even and smooth without using extra cement, complete all as specified and as directed. Note:- water proofing compound shall be measured and paid separately

Material and Labour for providing roof treatment with 4 mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gm/Sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 800 N/5 cm, tearing strength of 180N by torch-on application with minimum 10 cm side over lap & 15 cm end laps applied over and including bitumen primer @ 0.20 Kg/Sqm. A coat of blown grade hot bitumen 90/15 shall be applied over the membrane @ 1.2 Kg/Sqm. The rate quoted by the contractor shall also include taking down and refixing PVC water tanks wherever required, providing additional spout pipes, cutting and mitring the membrane at rainwater pipes, cutting and inserting of membrane into walls/ parapet wall etc as per the site requirement.

Material & labour for providing and fixing stainless steel (Grade 304) Curtain rod/ railing/grill/gates made of hollow tubes curtain rod made out of 25mm dia (outer dia), channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with SS bracket and finial of 28 to 29mm bore decorated type necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down existing MS curtain rod complete all as specified and as directed.

Taking up or down steel tubing and connections, 25 or 32 mm bore incl cleaning and removal to store all as specified and as directed.

Taking up or down steel tubing and connections, 20 mm bore including cleaning and removal to store all as specified and as directed.

Supply & fix 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply & fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply & fix in repairs 15mm bore chromium plated bib taps long body, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes including taking down of old items all as specified and as directed.

Supply & fix in repairs 15mm angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and as directed.

Supply & fix in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

Supply & fix in repairs 125mm size brass chromium plated shower rose all as specified and as directed.

Supply & fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Supply & fix in repairs 15mm bore stop valves chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) all as specified and as directed.

Supply & fix in repairs PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity all as specified and as directed.

Supply & fix 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified and as directed.

Supply & fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed.

Supply & fix in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

Supply & fix in repairs vitreous china, wash down water closet (EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

Supply & fix in repairs vitreous China wash basin,coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets all as specified and as directed.

Supply & fix in repairs 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail, complete all as specified and as directed.

Supply & fix in repairs chromium plated soap tray fixed with CP brass screws all as specified and as directed.

Supply & fix in repairs chromium plated towel ring all as specified and as directed.

Supply & fix in PVC bathroom cabinet mirror size 350mm x 450mm all as specified and as directed.

Supply & fix Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed.

Supply & fix in repair Brass CP mixer(wall mixer,basin mixer,sink mixer) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply & fix in repair plate rack made of stainless steel 1mm thick kitchen ; including fixing to wall overall size 766mm x 254mm x 706mm Complete all as specified and as directed.

Supply & fix stainless steel 06 peg cloth rail hook all as specified and as directed.

Demolition of brick work, PCC block or stone masonry built in cement mortar all as specified and as directed.

Material & labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 all as specified and as directed.

Material & labour for Laterite stone masonry walling of rubble, coursed, well bonded bedded in cement mortar 1:6 complete all as specified and as directed.

Material & labour for complete removal of existing treatment/new plasterd surface and applying two coats of acrylic emulsion paint (interior grade) on wall/plasterd roof over a coat of acrylic primer over putty as required all as specified and as directed per manufacturer's instructions all as specified and as directed.

Material & labour for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces all as specified and as directed.

Material & labour for complete removal of existing treatment on steel surface including scrubing cleaning preparation for new coat of painting as required all as specified and as directed.

Material & labour for preparation of New painted steel surfaces of any description over 10 cm width or girth and applying two coat of epoxy paint over a coat of epoxy primer all as specified and as directed.

Removing Shrubs, Vegitation, roots etc. from External wall surfaces , by dismantling Brick work , RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etcc. and refixing the same in original position and making good the surface dismantled all as specified and directed by EIC. (Area to be dismantled exc 1 Sqm and no Exc 3 Sqm)

Material & labour for applying Two coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal/algae resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, coverage @ 6 to 7 Sqm / ltr (two coats) over and including priming coat of exterior primer applied @ 11 Sqm/ltr (for one coat) including preparation of new plaster surface.

Dismantling CI soil waste pipe upto100mm dia including all joints and branch pieces jointed in cement mortar complete all as specified and directed.

Supply & fix, 75mm diaPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix, 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement concrete complete all as specified and as directed.

Supply & fix, PVC (SWR) bends 110mm dia any radius (Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix, PVC (SWR) bends 75mm dia any radius (Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix, 110 mm PVC (SWR) junction single (single T) equal or unequal (Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix, 110 mm PVC (SWR) vent cowl (Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix, 75mm mm PVC (SWR)vent cowl(Work in foul condition and in shaft) complete all as specified and as directed.

Supply & fix in repairs PVC (SWR) 'S' Trap for 110 mm dia of pipe all as specified and as directed.

Material & labour PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and as directed.

Supply & fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

Material & labour machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material & labour machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid , jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Material & labour machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Cutting of existing kota stone/marble/terrazo flooring with zero size mechanical powered cutting machine, cleaned thoroughly and finished with wax polishing complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good matching to the existing colour to the disturbed surface all as specified and as directed

One Light/ fan/bell point controlled by one switch

One 3 pin socket outlet 5 Amps on the same board with other switches

5 Amps socket point on independent board

All as per item no 121 here in before but 2.5 sqmm for 5/15 Amps socket on independent board

Supply & fix in repairs ceiling rose 3 terminal/PVC/polycarbonate isolated body all as specified and as directed

Supply & fix in repairs modular switch one way 6 Amps 1 module all as specified and as directed.

Supply & fix in repairs modular socket 6 Amps 2/3 pin 2 module. Make Legrand /Crabtree

Supply & fix in repairs modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose, Make Legrand /Crabtree

Supply & fix in repairs modular switch one way 16 Amps 1 way 1 module, Make Legrand /Crabtree

Supply & fix in repairs modular bell push 6 Amps 1 way 1 module, Make Legrand /Crabtree

Supply & fix in repairs Bell /buzzer ding dong AC 230 Volts single pole, Make Legrand /Crabtree

Supply & fix in repairs Fan step regulator, 120W - 2 module AC 230 Volts Make Legrand /Crabtree

Material & Labour sub main wiring using 2 runs of 6 Sq mm FR PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed/open conduit along with 1 run of 6 sq mm PVC insulated copper conductor FR cable as earth lead connected to common earth dolly complete all as specified including taking down the unserviceable wiring. Note : One run of PVC conduit, 2 runs of 6 sqmm PVC insulated copper conductor and 1 run of 6 sqmm PVC insulated copper conductor cable will be measured as one unit.

All as per item No. here in before but 1.5 sqmm FR PVC insulated copper conductor drawn through PVC conduit

Supply & fix SPN 16 way MCB DB double door 240 volts complete all as specified and as directed.

Supply & fix in repairs MCB SPN 32 A in existing DB all as specified and as directed.

Supply & fix 2 Pole 32 Amps RCCBs FOR EARTH LEAKAGE PROTECTION complete all as specified and as directed.

Supply & fix in repairs MCB SP 10A in existing DB all as specified and as directed.

Supply & fix in repairs MCB SP 16A in existing DB all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and as directed.

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC decorative type with driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and as directed.

Supply & fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specifed and as directed.

Supply & fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specifed and as directed.

Supply & fix in repairs Decorative wall light fitting (Globe type) made up of Polycarbonate, suitable for 9/12 W LED Lamp B22 base complete all as specififed and as directed.

Supply & fix in repairs LED lamp 9/12W B 22 suitable for wall light complete all as specififed and as directed.

Earthing for poles & other machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode complete all as specified and as directed.

Taking down carefully old ceiling fan any sweep and size from the existing location and fixing that on same location after cleaning and provn of safety pin including greassing the bearing of fan to make well functional after rectify the all minor defects complete all as specifed and as directed.

Taking down carefully old exhuast fan any sweep and size from the existing location and fixing that on same location after cleaning including greassing the bearing of fan to make well functional after rectify the all minor defects complete all as specifed and as directed.

Please Enable Macros to View BoQ information