Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹1.4 L
Closing Date
3 Aug 2026, 6:00 pmClosed
Deputy Municipal Commissioner
Overhauling of Existing 35.5 MLD (to be operated at 42 MLD capacity) Water Treatment Plant with Clariflocculator and V-Wier Filters (supply installing Repairing & Maintenance Flocculator bridge, rotating arrangement, Alum & Chlorination, Painting, installation of Electrification, wiring, lighting & Miscellaneous Items)
323556
2026-27/WSS
Open
Civil Works - Water Works
Works
Vapi
16 documents required · 16 mandatory
₹4,248
Municipal Corporation City of Vapi
₹1.4 L
13 Jul 2026
13 Jul 2026
13 Jul 2026
3 Aug 2026
13 Jul 2026
Schedules Name of Work Tender Amount (Rs.)
Overhauling of Existing 35.5 MLD (to be operated at 42 MLD capacity)
Schedule- B WaterTreatment Plant with Clariflocculator and V-Wier Filters as per BoQ and ₹
stipulated by Engineer-In-Charge
Total Tender Cost (Rs.) ₹
I/We am/are willing to carry out the work @ __________% _______ percent (should be writer in figures and words) below/above /at par
the estimated rates mentioned above, amount of my/our tender works out as under:
VpMC has addressed maximum items for this works, but some items specifically NOT mentioned but critical and important in opinion of
Engineer-In-Charge of VpMC shall be deemed to be covered in the works including wiring, electrification, lighting for each unit
including finishing and painting of each unit and waterworks permises including gate and compound wall as well as whole WTP is
covered. NO Extra/excess will be paid towards any item stipulated by VpMC, which may not be appearing in the schedule.
* Estimated amount * Estimated amount
Put to tender Rs …… Put to tender Rs ……
Deduct :....... % below Rs Add :....... % above Rs………
Total Rs…………. Total Rs………….
In words……………………………… In words………………………………………
* ( Please strike out whichever is not applicable ).
Signature of the Contractor
Bid Document For Overhauling of Existing 35.5 MLD (to be operated at 42 MLD capacity) Water Treatment Plant At Koliwad HW with Clariflocculator and V-Wier
Filters (supply installing Repairing & Maintance Flocculator bridge, rotating arangement, Alum & Chlorination, Painting, installation of Electrification, wiring,
lighting & Miscellaneous Items) @ Vapi Municipal Corporation.
Bill of Quantities of major items for overhauling of Existing 35.5 MLD (to be operated at 42 MLD capacity) Water Treatment Plant At Koliwad HW with
Clariflocculator & V-Wier Filters
Sr. Total Rate Total Amount
Sr. Total Rate Total Amount
ITEM DESCRIPTION Qty Unit
Item.No.1 Providing and supplying ISI mark G.I. pipes with Couplings of following class and
diameter including all taxes, insurance, transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239)
(Not for well/tube well column pipe)
1a 100 mm Dia 120.0 Rmt 992 ₹
Item.No.2.Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in
proper position, grade and alignment as directed by Engineer-in-charge including conveyance
from stores to site of work, labour, giving hydraulic testing, etc. complete.
2a 100 mm Dia 120.0 Rmt 34 ₹
Item.No.3.Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged
Arc Welded(Above 400mm) M.S.Pipe having bevelled ends plate or coil conforming to IS-3589-
2001 or its latest revision/ amendment for following thickness outside diameter at GWSSB store
or site anywhere in Gujarat State including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading conveyance to Departmental stores, stacking etc.
all complete. (Rate for MS Pipe based on the ex. works price of HR Coil as Rs.58500 per MT -
without GST (Above 3.15 mm to 10 mm) & Rs. 59000.00 per MT without GST (Above 10 mm) as onJan-
23.( WPI Index of H. R Coil of Dec-22 is 144)
168.30mm (4.0 mm thick)
3a 219.1 mm (4.5 mm thick) 100.0 Rmt 1898 ₹
Item.No.4.Extra Welding for fixing various appurtances
Welding in all positions with required number runs, for M.S. pipe internally and/or externally including
gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying
work as per specifications
(as above for butt joints : plate thickness)
Welding for pipe thickness 4mm to 7mm
Item.No.5.M. S. Specials plain & socket ends
5 Up to 300 mm. Dia. 1100.0 Kg 96 ₹
Item.No.6.C.I. Gates:- providing fabricating and fixing /installing mild steel gates of size as per design
6 with operating handle etc. For by pass arrangement 530.0 Kg 210 ₹
Item.No.7.Sluice Valve : Providing, supplying & Sluice valve PN 1.6 instead of filter gate including cost
of valves/specials/nut bolts/rubber packing / key to operate valves incl. all labour, equipments,
materials required.
Item.No.8.Butterfly Valve: Providing, supplying & ISI mark CI D/F Butterfly Valves as per IS
(latest addition) of following class and diameter including all taxes, insurance, transportation, freight
charges, octroi inspection charges, loading unloading, conveyance to departmental stores, stacking etc.
Butterfly Valves IS 13095 with ISI mark PN
Item.No.9.L,L& J of SV / AV / BFV / RV:- Lowering, laying and jointing in position following C. I. /
D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing
material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. Sluice
valves, Butterfly Valves, Reflux Valves
9a 150 mm Dia 6.0 No 585 ₹
9b 200 mm Dia 4.0 No 742 ₹
Item.No.10.Chlorination Plant:- Providing, installing & commissioning Chlorination plant as per design
capacity with Gravity feed type chlorinator 5 Kg / hr capacity with CPVC pipeline of 10 kg/cm2
11 Item.No.11.Emergency drum leakage kit-100 kg 1.0 No 40620 ₹
Item.No.12.Digital PH Meter:- Providing and supplying microprocessor based digital pocket PH
12 tester. 1.0 No 7217 ₹
Item.No.13.Digital TDS Meter:- Providing and supplying microprocessor based digital pocket TDS
13 tester. 1.0 No 7506 ₹
14 Item.No.14.Fluoride Test Kit (Digital):- Providing and supplying fluoride spot test kit. 1.0 No 2406 ₹
Item.No.15.Round PVC Cable: supplying, laying, testing & commissioning of 1.1 kv grade, XLPE
insulated, standard copper conductor, galvanised steel flat strip round wire armoured, extruded PVC
type ST2 heated, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable
trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement)
conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes:
4 Core x 6 Sqmm
15a 4 Core x 10 Sqmm 300.0 Rmt 295 ₹
Item.No.16.Isolator Switch/LT box/ MCCB Encloser (IS : 1818 Alternating current isolators
(disconnectors) & earthing switch)
Above 16 A, up to & including 80 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with
trip free mechanism, current limiting type with Thermal Magnetic / Microprocessor release (O / C, S /
C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with
all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Outgoing(s),
shall have enclosure dimensions-
300(H) x 500(W) x 600 (D) & following technical features:
3 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), TM release
17 Item.No.17.Bolt and Washer for valves 700.0 Kg 63 ₹
17a rubber packing normal 300.0 Kg 80 ₹
Item.No.18.JCB / Hydra / Crain: Hiring of JCB/Hydra/Crain including driver and diesel 12 ton / 8hr.
18 Working in day 6.0 Day 3334.49 ₹
Item.No.19.Dewatering : Dewatering by pumping set of required capacity including temporary
platform carting pumping at site and fixing the same in position including all accessories and fuel
19 and labour etc complete. 2.0 Job 179400 ₹
Item.No.19.Cleaning Removing & lifting exising Garbage elga mud etc in Flocculato
& Row water Channal up to 50 mtrs Lead & 4 Mtr. Height with all necessary tools, plants & labours etc
20 complete (Bed Form) 2.0 Job 510500 ₹
Item.No.21.Flocculator:-providing MS bridge in RCC Hopper bottom units having slope >45 Deg as per
hydraulic and process design with detention period 15 minutes and surface loading rate
litres/hour/sq.m and depth 4m using Floc Modules @45 deg.fabricating in pipe angel and channel
clarifier M.S Bridge with chequred plate platform 1 m wide.
Item.No.22.motor gearbox and rotating :- providing wheels rotating arrangement including motor
gear boxes assemblies with sleepring unit central bearing panel board as per requirement fabricating
with supporting arrangement.
Item.No.23.Required Demolition in flocculator old structure of M.S Bridge and non working assembly
including rcc and steel structure of unserviceable materials and disposal of unserviceable materials
23 with all 1 km lead and lift work. 2.0 Job 212750 ₹
Item.No.24.Required Necessary Labour Fitting Job in Flocculator Structure gear box motor, sleepring
unit, rotating unit, fitting purpose with alliment and balancing including welding and Required RCC
24 work including 2.0 Job 316250 ₹
Item.No.25.Cable Joint Electric Work flocculator : Necessary Cable jointing work with all accessories
for Panel board to Flocculator gear box,clearifire gear box rotating unite panel board etc
Item.No.26.Alum Stirrer :- Providing, supplying Alum Stirrers with Motor, gear arrangement &
26 electrical cable, connections, control panels etc. (size as per design) 2.0 No 166700 ₹
Item.No.27.Required Demolition old structure situated at alum stirrer, flash mixer etc of steel, brick
work and rcc non working assembly including rcc and steel structure of unserviceable materials
27 and disposal of unserviceable materials with all 1 km lead and lift work. 1.0 Job 35000 ₹
Item.No.28.Required Alum Stirrer Necessary Labour Fitting Job with Required Fabrications Work for
28 Old structure to new Alum Stirrer fitting with fitting all accessory. 1.0 Job 18500 ₹
Item.No.29.Alum Stirrer Cable Joint Electric Work : Necessary Cable jointing work with all accessories
29 for Panel board to Alum Stirrer 1.0 Job 11500 ₹
Item.No.30.Flash Mixer :- providing supply rapid mixing device with fan gear and motor assembly as
30 per design. 2.0 Job 207000 ₹
31 Item.No.31.Neccesory Flash Mixer Foundation Structure misc. work 2.0 Job 25500 ₹
Item.No.32.Flash Mixer Cable Joint Electric Work : Necessary Cable jointing work with all accessories
32 for Panel board to Flash Mixer 2.0 Job 11500 ₹
Item.No.33.Air Blower:- Providing, installing & commissioning Air agitationsystem including Blowers
33 piping main control valve arrangement etc, as per design 2.0 Set 433500 ₹
Item.No.34.Neccesory Blower Foundation Structure pipe jointing welding work appropriate alignment
34 including pipe lifting lowering at all filterbed misc. work as per design. 1.0 Job 316000 ₹
Item.No.35.Air Blower Cable Joint Electric Work : Necessary Cable jointing work with all accessories
35 for Panel board to Air Blower 2.0 Job 11500 ₹
Item.No.36.Chlorine Safety equipments & emergency leakage rescue equipment :- to control
chlorine leakage control safety for Risque force providing compressor base air line breathing apparatus
36 for safety. 1.0 No 471500 ₹
Item.No.37.Providing and fixing Safety grills of required pattern for windows/Door at required spacing
as per design and hold fasting with coach bolts including one coat of primer and two coats of
37 matt finished oil painting etc complete. 300.0 Sq. ft 415 ₹
Item.No.38.Accuated Valves :- providing supplying accurate valve with in belt gear box arrangement
appropate height single phase/three phase rotated revises/forward arrangement. No
Item.No.39.Lowering, Laying Accurate Valves with all labour foundation, nut, bolt etc completed.
Total Tender Cost (Rs) ₹
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
001 NIT.pdf
002 SBD.pdf
003 WTP Koliwad Repair Tender.pdf
004a Vapi WTP Additional Item Specification.pdf
005 Schedule B Koliwad WTP Repair.pdf
006 GR1.pdf
007 GR2.pdf
Physical Criteria.pdf
004 specification.pdf
CORREGENDUM.pdf
CORRIGENDUM
003.WTP Koliwad Repair Tender.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .