Repair and Renovation of Punyakoti Hostel Building at Veterinary College, Bidar

Repair and Renovation of Punyakoti Hostel Building at Veterinary College, Bidar

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, s...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever re...

Painting with Silicon & Acrylic emulsion based water thinnable sealer of

approved brand and manufacture on wet or patchy portion of plastered

surfaces :One coat with paint of approved quality to gi...

Painting with Silicon & Acrylic emulsion based water thinnable sealer of

approved brand and manufacture on wet or patchy portion of plastered

surfaces :One coat with paint of approved quality to gi...

Finishing walls with water proofing cement paint of required shade :Newwork (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dus...

Providing Honne wood wrought and putup for purlins, common rafters

and similar work including cost of materials, labour, usage charges complete

as per specifications.

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden fr...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size g...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colour...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick

ness to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades,...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe ...

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Providing and fixing brass stop co...

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Providing and fixing brass bib coc...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) :

13.4.1 25 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) :

13.4.1 25 mm nominal bore Gate Value 32mm

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an...

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,...

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china

flushing cistern & C.P. flush bend with fittings & C.I...

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 455x610 mm interna...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one ste...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one ste...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one ste...

Supplying heavy gauge PVC conduit pipe 19/20/25/32/40mm dia 2/2.5mm thick confirming to IS2509 with suitable size bends, metal junction boxes adhesive paste etc., and running the conduit before concr...

Supplying heavy gauge PVC conduit pipe 19/20/25/32/40mm dia 2/2.5mm thick confirming to IS2509 with suitable size bends, metal junction boxes adhesive paste etc., and running the conduit before concr...

Supplying heavy gauge PVC conduit pipe 19/20/25/32/40mm dia 2/2.5mm thick confirming to IS2509 with suitable size bends, metal junction boxes adhesive paste etc., and running the conduit before concr...

Supplying and fixing sheet metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an intervals of every 300mm etc as required. 25 mm dia

Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an intervals of 300mm using N...

Supplying and fixing metal fan box with round hook.

Supply and wiring adopting loop system in the existing PVC conduit/casing capping using 1100V grade, 2X1.5Sqmm (Phase and Neutral) & 1X1.0Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire ...

Supply and wiring adopting loop system in the existing PVC conduit/casing capping using 1100V grade, 2X1.5Sqmm (Phase and Neutral) & 1X1.0Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire ...

Supply and wiring adopting loop system in the existing PVC conduit/casing capping using 1100V grade, 2X1.5Sqmm (Phase and Neutral) & 1X1.0Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supply and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 1-3W...

Supply and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 6Way

Supply and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 8Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc,. complete on existing metal/...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc,. complete on existing metal/...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc,. complete on existing metal/...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket

Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 pha...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 140/450V up to 300ma sensitivity on existing wood/panel board 40Amps 2pole

Supplying, fixing wiring, earth electrode for grounding conduits, I.C cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5mtr long buried in a pit. The pit should b...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Supplying of 1.1KV LT UG cable XLPE or heat resistant PVC insulated, extruded inner sheathed, armoured UG LT cable as per IS-1554 (Part-1) IS-7098 (Part-1), Armouring strip thickness in average +5% a...

Labour charges for laying of 1.1KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required. 6 Sqmm to 16 Sqmm

Supplying and fixing of class A (medium duty) GI pie of wall thicknessnot less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV 40mm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia

Supplying and fixing 2mm thick perforated cable GI tray on exisitng MS angle support using necessary GI bolts/nuts and washer or welding as required. 150x50mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 1.5 Sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 2.5 Sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 4 Sqmm

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps. nails, guttas/spacers etc. 8SWG GI wire

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for opeartion ob 230volts, 50 cycles. single phase AC supply conforming ti ISS-374-1979 and with double bal...

Supplying and drawing UTP-CAT 6E LAN cable

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair

Supplying and fixing of I/O socket with back box Single I/O

Supplying and fixing of retrofit type LED bulb 9W with opal acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per watt, life 25000 burning hours and complianc...

LED light fitting 1x4' -20/22w

LED Floodlight 100W

Supplying of cylindrical light fixture of 18watts

Fixing all types and all capacities flourscent/ false ceiling/ spot light/ CFL/ LED fitting indoors on the wall/ ceiling/ rafters/ griders using 23/.0076" twin twisted PVC insulated wires. required no...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary ...

Extra length of GI pipe of class B 19mm for fan down rod

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable for operate on 230V 50Hz, AC Supply complete.

Fixing exhaust fan