85912 E8 SPECIAL REPAIR TO CERTAIN SMQs/OMQs AT AIR FORCE STATION JODHPUR UNDER GE AF NO-2 JODHPUR

Amount

AGE B/R-I PORTION FROM BOQ ITEM NO-02 TO 91

Taking down cement plaster in brick walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed .

M&L for renderning 15 mm thick in CM 1:6 on stone masonary surfaces finished even and smooth with out using extra cement etc complete all as specified and as directed .

M&L for renderning 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth with out using extra cement etc complete all as specified and as directed .

Dismantling floor hearth or wall tiling including cement mortar or bedding (but not backing ) removiing serviceable tiles to store and rubbish of the premises etc complete all as specified and as directed .

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250 x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match the surface over and including 10 mm thick plaster in Cm 1:4 complete all as specified and as directed .

Demolition of cement concrete (unreinforced) in ground floor or paving of any description and in any position not otherwise specifically provided etc complete all as specified and as directed .

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floors finished rough etc complete all as specified and as directed .

M&L non skid ceramic coloured tiles of size 300 x 300 x 6 to 7 mm thick over cement screed bed, 15 mm thick in CM 1:6 for laying floor finishes laid and jointed with grey cement slurry mixed with pigment to match the shed of tile including pointing with coloured cement to match etc complete all as specified and as directed .

M&L for colour non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed 1:6 etc complete all as specified and as directed .

All as per item no above but in skirting over 10mm thick rendering 1:4 etc complete all as specified and as directed .

M&L for machine cut kota stone slab flooring 20-25mm thick over and incl 20mm cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed .

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm cement screed 1:6 and jointed with grey cement slurry with pigment to match the shade ancluding rubbing and polishing etc complete all as specified and as directed .

Taking down Chowkats or frames but with shutters (without taking off shutters from the frames) n exc. 1.5 sqm etc complete all as specified and as directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening etc complete all as specified and as directed .

S&F Factory Made with particle board core Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site etc complete all as specified and as directed .

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, wire mess stapel dovetailed or welded with cooler provisioning opening all as directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, wire mess stapel dovetailed or welded all as directed by Engr-in-Charge.

S&F Steel ventilator with top hung shutter, in two part one part fixed glass and other part are openable including hinges, steel peg stay etc complete all as specified and as directed .

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 grade E-165 etc complete all as specified and as directed .

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as directed by Engr-in-Charge.

S&F 3.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane etc complete all as specified and as directed .

S&F 3.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane frosted on one side etc complete all as specified and as directed .

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) etc complete all as specified and as directed .

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed .

M&L for cement concrete Type B0 1:2:4 (12.5mm graded graded graded aggregate) for filling the chowkat etc complete all as specified and directed.

M&L for mild steel work in bands, straps, holdfast, hook and pintle hinges confirming to Fe-290 grade E-165 etc complete all as specified and as directed .

M&L for 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edge of framing plain or chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members of shutters as specified in clause 8.20 (a) of section 8 of SSR Part-I (1991), complete all as specified and directed by Engr-in-Charge.

M&L for 35mm thick of 2nd class hard wood plain framed factory made panelled shutters (any number of pannel) with panel of timber flat on both side (feathered edged) or of 12mm thick veneered particle boards with commercial faces vineers. Complete incl fixed to chowkhat the size of rails and styles as per IS 1003 or as described in SSR Part-I kiln seasoned and chemically preassure treated complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section etc complete all as specified and as directed .

S&F extruded aluminum alloy handles fabricated type and anodised of size 150mm etc complete all as specified and as directed .

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed .

M&L for mild steel of 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixing with necessary arrangment etc complete all as specified and as directed .

M&L for preparation of new steel surfaces, applying two coats of synthetic enamel paint over a coat of red oxide of any description etc complete all as specified and as directed .

M&L for preparation of new wooden surfaces, applying two coats of synthetic enamel paint over a coat of pink primer of any description and girth etc complete all as specified and as directed .

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed .

M&L for treatment of sunkun portion with Dr fixit Bathseal WPC (high performance cementitious polymer water proo coating with the film thickness 1mm in two coats it comes with Pre measured combination of liquid and powder over 15mm thick cement plaster CM 1:4 upto height of 150mm above the floor level and fixing of 40mm dia GI medium grade spout pipe each WC complete all as specified and directed by Engr-in-Charge.

S&F UPVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for 75 mm out let including taking out old floor trap etc complete all as specified and as directed .

S&F 75mm dia UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed .

S&F 110mm dia UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed .

M&L for PCC type E2 1:5:10 (using 40mm graded stone aggragate) in mass concrete as in filling of sunkun portion of WC area etc complete all as specified and as directed .

Taking up or down galvanised steel water tubing 15mm bore fixed to walls or laid under floors or in any other position alongwith required connetions including cleaning for re-fixing or renewal from site etc complete all as specified.

All as per item No15 here-in-before but 20mm bore etc complete all as specified and as directed .

Refixing old 15mm bore galvanised steel tubing and connections with and including new (ISI Marked) fittings/fixtures fixed to walls or laid under floors etc complete in new or old position on walls, ceiling, floors etc complete all as specified.

All as per item No 45 here-in-before but 20mm bore etc complete all as specified and as directed .

M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed .

All as per item No 47 here-in-before but 20mm bore pipe etc complete all as specified and as directed .

S&F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed .

S&F in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including P trap with PVC connection 15 mm 450mm long etc complete all as specified and as directed .

S&F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 ltr capacity white, with inlet, ball valve, float including brackets and flush pipe 32mm dia connections to pies pvc connection 450mm long an fixing etc complete all as specified and as directed .

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length etc complete all as specified and as directed .

S&F in repairs, 15 mm bore stop cock/angle cock , fancy type, chromium plated half turn complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore bib cock long body fency type with crutch or butterfly handle, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass chromium plated 4" (Square) overhead shower with arm 195mm with with swivel joint including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F in repairs ss grating with or without waste hole make approved by Engr-in-Charge.

S&F Pillar taps, cast copper alloy, fency type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling brass chromium plated and waste pipe complete all as specified and directed by Engr-in-Charge.

S&F curtain rails, stainless steel, chromium plated with fixing brackets, stops, rollers etc of 20mm bore complete all as direcred by Engr-in -Charge.

S&F stainless steel decorative finals as per approval by Engr-in-Charge.

S&F 18mm thick solid UPVC (WPC) of density not less than 0.60 gm/CM3 decorative face on one faces and other face are white ; fixed with screws to timber frame work as in kitchen cabinate approval by Engr-in-Charge.

S&F 75mm size Brass handles, cast type, polished bright for kitchen cabinate complete all as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs rotational moulded polyethylene tripal layer food graded water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position with fittings all as specified in SSR Part-I, 500 ltrs capacity complete all as specified.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high denisty plastic ball screwed for iron pipe and fixed of 20 mm bore pipes complete all as specified. (Minimum weight 210 gm/each.)

Taking out old existing roof treatment (APP membrane & plaster) and removing outside MoD and cleaning of roof slab/ chajja, sweeping with brooms removing all lose materials debries etc complete all as specified and directed by Engr-in-Charge.

Cutting out cracks to V section in existing roof of terrace cleaning out wetting/ grouting with cement and slurry 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick rendering in CM 1:3 over stone/concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for preparing new surfaces and appiying two coat of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of diluted self priming with reinforcing fabric sheet as per manufacturer instruction to stop leakage/ sepage from roof/ wall complete all as specified and directed by Engr-in-Charge.

Dismantling existing tanks, any capacity, setting aside (or lowering if required) for repairs of roofs and hoisting if required, reconnecting and refixing in position (Repairs to roofs measured separately).

M&L 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified.

M&L for complete removal of existing treatment of wall surfaces by scrubbing with wire brush hard brush, washing down with water, applying two coat of oil bond distemper over a coat of alkali resistant primer over one coat of wall care putty, complete all as specified.

M&L for preparation of old wooden surfaces and applying two coat of synthetic enamel paint of any description over 10 cm width or girth complete all as specified.

All as per item no-75 above here-in-before but on steel surfaces complete all as specified and directed.

M&L for preparation of old plaster or unplaster surfaces of ceiling applying two coat of white wash complete all as specified.

M&L for preparation of new plaster or unplastered surface of walls, applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

S&F 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for RWP complete all as specified and directed.

S&F 110mm UPVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs sheet glass shelf 60cm (with brass brackets) consisting of 5.5 mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws. Approved by Engr-in-Charge.

S&F Towel Rail 600mm long of SS fixed with and including Chromium plated brass screws and wooden/plastic cleats approved by Engr-in-charge.

S&F salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm incl necessary exc, pcc complete all as specified and directed.

S&F 110mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate Fe-290 grade E-165 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 grade E-165 complete all as specified and directed.

AGE B/R-II PORTION FROM BOQ ITEM NO-93 TO 217

M&L for demolitation of cement concrete of any description and in any position not otherwise specifically providedfor and complete all as specified.

M&L for cement concrete type B-1, 75 mm thick 1:2:4 (20mm graded aggregate) for finishing cement concrete surface even and smooth without using extra cement and complete all as specified.

Cement concrete type B-0, 25 mm thick 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thic (square/rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and set and jointed in neat cement slurry and pointed in white or colured cement to match over 15 mm thik screed bed in cement mortar 1:6 and complete all as specified.

M&L for vitrified ceramic tiles 10 mm thic (square/rectangular) polished on vertical sufaces, area of each tiles n.exc 0.36 sqm in floors and set and jointed in neat cement slurry and pointed in white or colured cement to match over 10 mm thik rendering in cement mortar 1:6 and complete all as specified.

M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match thick over cement screed 15mm thick in cement mortor 1:6 laid and jointed complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut Kota stone slab 20-25 mm thick on skirting, dado over 10 mm thick rendering in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and complete all as specified.

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick renderinjg in CM 1:4 complete all as specified and directed.

M&L Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified.

M& L for 15mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE:- Water profing compound shall be measured and paid seperately)

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, white or tinted complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of cement base paint over a coat of primer, white or tinted complete all as specified and directed.

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE:- Water profing compound shall be measured and paid seperately)

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of white wash over a coat of primer over a layer of 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of Ceilings and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of Ceilings and applying two coats of white washover a coat of primer and over a layer of 3mm thick wall care putty, all as directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new woodensurface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer and complete.

M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thuickness in floors, aprons complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repairs vitreous- China wash down water closet Squatting pan ( pedestal Pattern) including flushing cistern and flush pipe complete all as specified and as directed.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flushing cistern and flush pipe incl PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repair vitreous china WHB white,flat back, size 450 x 300mm including brackets. vitreous china(flat black or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed.

S&F PVC waste pipe 32mm bore and 1000/900 mm long for WHB all as specified and as directed.

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified.

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door make 'Alpina' (size 16"x12") white in colour or equivalante make Prayag or equivelent.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F sinks with drainage boards made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar o to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar o to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 25 mm complete all as specified and directed.

S&F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F 25 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 25 mm dia complete all as specified and directed.

S&F in repair Non return valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr-in-Charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair complete all as specified and directed.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr-in-Charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal complete all as specified and directed.

S&F PVC (SWR) door bends 110 mm dia with acess door complete all as specified and directed.

S&F PVC (SWR) Vent Cowl 110 mm dia complete all as specified and directed.

S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed.

S&F stack clamps out of 50mm by 5 mm flat iron & 16mm dia mild steel iron stay incl bolt & nuts & securing ends of stays to walls for 100mm pipe complete all as specified and directed.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement complete all as specified and directed.

S&F salt glazed stoneware gully traps of size 180 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm complete all as specified and directed.

Dismantling of cat iron or reinforced concrete drain pipe, jointed in cemented mortar and taking out of trenches or in vertical position all as directed by the Engr-in-Charge.

S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

Demoliton of reinforced cement concrete of any description for roofs, floor (Other than ground floor), beams, staicases, landing, chajjas and similar work and complete all as specified.

M&L RCC Nominal mix Type B0 1:2:4 (12.5 mm graded aggregate) for slabs supoorted on walls, beams and colimns in floor, roofs, landings, balconies, deck slab and in shelves and the like and complete all as specified.

S&F MS TMT bars 10mm dia and over, cut to length, bent shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed) complete all as specified and directed.

S&F MS TMT bars 5mm dia and over upto 10mm dia in stirrups, spacers and binders and complete all as specified.

M&L for Formwork to sides & soffit of chajja, antilevers etc and complete all as specified .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and refixing in same opening and complete..Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm each but n.exc 4.5 sqm eachand removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats Note: Glazed or clothetc in panelsor sash square shall be measured seperately

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each complete all as specified and directed.

S&F in repairs for 18/19 mm thick prelaminated article board, interior grade, pelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200mm size complete all as specified and directed.

S&F in Aluminium anodised barrel tower bolt of extruded section 200mm size complete all as specified and directed.

S&F in repairs Butt hinges,heavy weight cold rolled mild steel of size 200mm complete all as specified and directed.

S&F in Butt hinges,heavy weight cold rolled mild steel of size 125mm complete all as specified and directed.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as specified and directed.

S&F in extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as specified and directed.

S&F in repairs drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engr-in-Charge.

S&F in repairs decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod or as directed by Engr-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-Charge.

S&F in repairs floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair MS peg set with 3 to 5 hooks fixed to doors/wall with screws complete all as specified and directed.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engr-in-Charge.

S&F in repairs projecting type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs peg stay 250 mm/300 mm long stopping of steel window/ventilators including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repair MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones complete all as specified and directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

M&L for providing and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not provided using chemical emulsion at therat of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wal and rodding etc complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors and all as specified.

S&F steel windows with side hung shutters including projecting type hinges sith steel handle and steel peg stay , complete with glazing bars, dovetailed or welded. (Note : One AC vent of size 0.70 mtr x 0.50 mtr with top hung shutter will be provided)

All as per item No 202 above but without glazing bars complete all as specified and directed.

M&L for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted, or forged into spikes ; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing framework of water tanks and similar work conforming to Fe290.Gde-E-165 and complete all as specified.

S&F 30mm thick PVC sheet/board consisting PVC insulated panels having expended polystrene (EPS) struck to 2mm thick plain colour PVC sheet of required size in cupboards and in similar works including brackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed.

S&F PVC insulated panels 30mm thick for cupboard shetters of required sizes at site made out of 18mm thick one side decorative teak face finish consisting of 18mm thick PVC sheet/ board including all necessary fittings and fixures like handles, hinges, locking devices, maganetic catches etc. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed.

S&F in repairs for stailess steel kitchen plate rack size-31x30x10 inch and all as directed by Engr-in-charge.

S&F in repairs for center hole basin mixer without popup waste system and all as directed by Engr-in-charge.

S&F in repairs for sink mixer with regular spout w/m and all as directed by Engr-in-charge.

S&F in repairs for wall mixer with bend and all as directed by Engr-in-charge.

Taking down old existing roof treatment (APPP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge.

Cutting out cracks to V section in existing roof or terrace cleaning out wetting / grouting with cement and sand slurry 1:3 complete all as specified and as directed by Engr-In-charge.

M&L10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement ,Water proofing compound shall be measured and paid seperately complete all as specified and directed.

M&L for preparing new surfaces and applying two coats of polyurethene (PU) acrylic based water proofing liquid compound over one coat of diluated self priming with reinfocing fabric sheet as per manufacturee instruction to stop lakage / seepage from roof/ wall complete all as specified and as directed by Engr-in-charge.(Note : Quoted rate shall deemed to be included for work in building / structure of any height)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Double Door Frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with M.S. tube complete all as specified and directed by Engr-in-Charge.

AGE E/M PORTION FROM BOQ ITEM NO-219 TO 250

Taking down carefully aluminium/copper point wiring (light ,fan, socket or power)complete, including fittings & fixtures such as switches, ceiling roses, pendents, regulators, sockets,bell push,bell,light fittings etc.removing materials to store for keeping in safe costudy or for taking credit (credit for shall be made as per Sch of credit) and making good disturbed surface of walls, floors etc. to match to the existing surfaces.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC conduit / casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch.Note- Quated rate shall include cost of modular plate as site requirment for item no 220 to 225.

All as per Item No-220 but One light point controlled by two two way switches complete all as specified and directed by Engr-in-Charge.

All as per Item No-220 but One fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Item No-220 but One 3 pin socket outlet 5 Amps on the same board complete all as specified and directed by Engr-in-Charge.

All as per Item No-220 but One 3 pin socket outlet. 5 Amps on the Independent. Board complete all as specified and directed by Engr-in-Charge.

All as per Item No-220 but One bell point controlled by one switch complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 2.5 Sqmm FRLS cable in and including PVC conduit /casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 2.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One 15 A socket outlet independent .Note- Quated rate shall include cost of modular plate as site requirment for item no 220 to 225.

M&L in repair for ceiling rose surfaces bakelite white coloured 3 terminals complete all as specified and directed by Engr-in-Charge.

S&F in repair electric Bell ding dong AC. 230volt single pole complete all as specified and directed by Engr-in-Charge.

S&F in repair angle holder with 11 Watt LED Bulb , insulated polycabonate body with back plate complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type switch, 1 way,6 Amps, 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type Bell switch, 1 way, 6 Amps, 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type switch, 1 way, 16 Amps, 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type socket, 6A 3 pin, combined, 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type socket, 6/16A 3 pin, combined, 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular type fan regulator step type 120 W 2 module complete all as specified and directed by Engr-in-Charge.

M&L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No -236 above but with 2 runs of 4.0 Sqmm cable with one run of 2.5 Sqmm cable for earthing complete all as specified and directed.

Taking down old MCB DBs any size incl MCBs complate all as specified and as directed by Engr-in-charge.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways complete all as specified and directed.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 12 ways complete all as specified and directed.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN, 415 volts, 4 ways complete all as specified and directed.

S&F in repair MCB four pole 415 V TPN 63 Amps C Curve complete all as specified and directed.

S&F in repair Isolator MCB SPN 40 to 63 Amps, 'C' Curve 240 volts complete all as specified and directed.

S&F in repair MCB SPN 20 to 40 Amps, 240 volts complete all as specified and directed.

S&F in repair MCB SP 5 to 32 Amps, 240 volts complete all as specified and directed.

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 45 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F LED Trim Line 10W light 2' long with 0.75 sq mm PVC insulated & sheathed three three core flexible multi stranded copper conductor cable all as specified and directed.

S&F LED tubelight fitting 20W light 4' long with 0.75 sq mm PVC insulated & sheathed three three core flexible multi stranded copper conductor cable all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (2009) including dismantaling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.

S&F Modular type switch, 2 way,6 Amps, 1 module complete all as specified and directed.

Harsh Enterprises