AS AND AS OF STAIRCASE OF FAB-1 SHOP FLOOR BUILDING 18, RAMP OF BLDG NO 18A OF FABRICATION DEPARTMENT AND ADDITION AND ALTERATION TO LADIES BATHROOM IN FAB DEPARTMENT VENDOR AREA AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATNAM

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing debris outside ND(V) premises complete all as specified and as directed.

M&L rendering 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth(without using extra cement) complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth even without using extra cement complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for and removing debris outside ND(V) premisescomplete all as specified and as directed.

M&L for 75mm thick in cement concrete type C2 1:3:6 (Using 40mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for hard core of broken stone or boulder of gauge not exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to true surface complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate etc 100mm thick as in sub base for floors, hardstandings etc complete all as specified and as directed.

M&L for Reinforced cement concrete RMC M-30 in foundations, including rafts, footings, foundation beams : plinth beams, lintel beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for mild steel deformed bars 10mm dia and over cut to length, bent to shape required including binding with and incl mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Demolition of brick work built in cement mortar and removing debris outside ND(V) premises complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry Type B1 1:2:4 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in CM 1:6 , complete all as specified and as directed.

Dismantling of rolling shutter including all fittings etc complete all as specified and as directed.

S& F electric operated, 1.25mm thick steel rolling shutter exe 15 sqm area of sides of clear opening, with wheel and hand chain, and guide channels without ball bearing, including top cover anchor rod, hasp and staple, shaft, pipe, brackets and one shop coat primer, erected in position as indicated complete motor operater type with bevel gear box and crank handle complete all as specified and as directed. Note:- Electric motor measured and paid separately.

S&F electric motor of capacity 3.70KW, 240 V single phase motor of 50Hz for rolling shutter including all necessary fitting complete all as specified and as directed.

M&L for painting to new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and as directed.

M&L for scraping/taking down existing treatment completely on ceilings and applying three coats of white wash etc complete all as specified and as directed.

M&L for scraping/taking down existing treatment completely and applying two coats of oil bound distemper over a coat of alkali resistant primer etc complete all as specified and as directed.

M&L for scraping/taking down existing treatment completely and applying two coats of weather proof paint over a coat of alkali resistant primer etc complete all as specified and as directed.

M&L light shed ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and as directed

Dismantling mild steel work of any description all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channel, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc ., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)and removing rubbish outside ND(V) premises complete all as specified and directed.

M&L in cement concrete type B-1 1:2:4,30mm thick using 20mm graded stone aggregate all as specified and as directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.09 sqm in floors etc laid over 15 mm thick screed bed or bedding layer for laying tiles in CM 1:6 and set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L for coloured glazed ceramic tiles 350 x 450 x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl rendering in CM 1:4, 10mm thick all as specified and directed.

Material & labour for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in steps working platform,cooking platfoorm and like including cutting in oval shape for oval type WHB below counter basin etc,. in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

Material & labour for rounding to edges of granite stone slabs one edge such as in counter type WHB platform including machine polishing etc., complete all as specified and as directed.

Demolition of textile covering, including removal of waste material to a distance of 5KM away from Dockyard premises all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate as flooring all as spd and directed.

M&L for 10mm thick screed in cement mortar 1:4 with water proofing compound as per manufacture instructions by weight of cement and finish the surface even and smooth with out using extra cement. (supply WPC will be measured and paid separately) all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per Sqm including cleaning of surfaces(one coat below and one over the membrane) Note - Each coat will measured and paid separately.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) shall be laid over entire roof surface and on vertical surface up to groves with other laps of 100mm. The over lap shall be sealed by flames.

M&L for applying one coat of bituminous aluminium paint @ 0.10 Kg/Sqm.

Supply only integral water proofing compound.

M & L for RCC Type B1 1:2:4 (20 mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L for reinforcement steel using TMT rebars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing complete all as specified and directed.

S/F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frank made out MS tubes for top and bottom rolls MS shall be cured with heat moulded plain colour PVC `C` channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame/scaled to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F anodised aluminium butt hinges 125mm long

S&F anodised aluminium 150mm long cast type handle

S&F anodised aluminium tower bolts 150mm long

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Taking down chowkats or frames n exc 1.5sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

M & L Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

Supply and fix alumiium door shutter with chowkats mad out of hollow aluminium sections as mentioned below, each shutter having 2 Nos. ‘D’ type aluminium handles of 200 mm long, 2 Nos. aluminium tower bolts of 200 mm long and 1 No. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly paneled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading all as specified and directed: Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg./RM appx.) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg./RM appx.) Bottom rail : 150.00 x 2.20 mm thick (2.376 Kg./RM appx.) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg./RM appx.) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg./RM appx.)

Material & labour for Partition walls with panels of 1.44 sqm (appx.) made out of aluminium anodised hollow sections 63.50x38.10x1.95mm thick, snap fit beading, rubber gasket, 5mm thick sheet glass and 12mm thick prelaminated particle board interior grade, prelaminated one side with decorative chioce lamination and other side balancing light grey lamination including dismantling the damaged partition complete all as specified and directed.

S&F sheet frosted glass 4 mm thick ordinary quality fixed with aluminium beads in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S/F in repairs vitreous us china squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests exceeding flushing cistern and flush pipe including provision of concrete bedding all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with integral foot rests with `P` or `S` trap including provn of lime concrete bedding all as specified and directed.

S&F vitreous china urinal, bowl type flat back of size 465x355x265mm white (min) with grating and union for discharge pipe complete all as specified and directed.

S & F in repairs PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom and cover & mild steel chromium plated or aluminium hinging device for EWC etc complete all as specified and directed.

S & F in repair Vitreous China Ware Wash hand basin white, oval type, size 550 x 400 mm size complete all as specified and directed.

S&F 32mm dia waste coupling of PTMT suitable for urinals & WHB complete all as spd and directed.

S & F urinals spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and directed.

S & F bore dia of 32mm discharge pipe bottle trap of PTMT having min water seal of 25mm (min weight 32mm-260grams) complete all as specified and directed.

S&F in repair Waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals

S&F PVC (SWR) multi floor trap size 75mm, plain with CP grating including jointing with solvent cement etc.

S/F in repairs pillar taps, cast copper alloy with capasten heads cromium plated fancy type, long screwed shanks and fly nuts, screwed for iron pipe 15mm bore all as specified and directed.

S&F PVC connection (high density) 15mm dia 600mm with PTMT nuts both ends with rubber washer complete all as spd and directed.

S&F in repairs 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop valve cast copper alloy ,fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both endsfor iron pipe or for unions and fixed complete all as spd and directed.

S&F 15mm bore Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms complete all as spd and directed.

S&F in repairs 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair soap tray vitreous china white of size 160x160x90 mm fixed to plug with chromium plated brass screw complete all as specified.

S&F towel rail 600 mm long of aluminium anodised 20mm dia D type between flanges complete all as specified and directed.

S/F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union all as directed.

Taking down rain water or soil pipes or PVC pipes including all fittings any size and pattern

Supply and fix 75 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) waste and rain water pipes single socketed in any length with rubber ring joints laid in floors or trenches etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius

S&F 110mm bore PVC (SWR) bends of any radius

S/F PVC SWR single 'T' equal or un equal with access doors 75 mm bore.

S/F PVC SWR single 'T' equal or un equal with access doors 110 mm bore.

Dismantling water tank exc 1000 but n exc 2000ltrs capacity complete ll as specified and directed.

Supply and fixing rotational moulded polyethylene water storage 1000 ltrs. capacity tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Taking down 15mm bore GI tubing with fittings from walls complete all as directed

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20mm bore GI tubing with fittings from walls complete all as directed

S & F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

SCHEDULE 'A' PART-II [ELECTRICAL WORKS]

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materila to store for keeping or for taking credit (Credit for above items should be made as per conditionsseperately) and making good disturbe surfaces of walls, floors etc.,

Taking down old unserviceable DBs and main switches with MCBs and MCCBs.

Material and labour for point wiring surface type in non-metallic FRLS ISI PVC conduit medium grade with 1.5 Sqmm size multi stranded fir retardant PVC sheathed FRLS copper conductor cable and PVC insulated FRLS cable of size 1.5 Sq.mm as earth continuity condutor including clamps, screws gutter/plug etc., with and incuding sheet steel terminal board with bakelite 3 mm thick sheet:

All as per item No 2.03 above but for One light point controlled by one 5 Amps switch one way

All as per item No 2.03 above but for One fan point controlled by one 5 Amps switch on way

All as per item No 2.03 above but for one 3/5 pin 5 Amp switch socket outlet on independent board

Supply & Fix piano switch 5 Amp one way flush type.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amp.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body

Supply and fix LED battern 18 Watt, Cat Part No. BCLSB 18 NW LED or equivalent in CG/Philips/Wipro.

Supply and fix SP MCB 6 to 32 Amps C curve complete as directed. Make :- Schneider model No. A9N1P06C to A9N1P32C or equivalent in ABB/L&T/Havells/CG.

Supply and fix SPN MCB 6 to 32 Amps C curve complete as directed. Make :- Schneider model No. A9N2P06C to A9N2P32C or equivalent in ABB/L&T/Havells/CG.

S&F double door SPNDB 4 way double door with 200 Amps rated bus bar all as specified and directed. Make :- Schneider equivalen in ABB/L&T/Havells/CG

M&L for wiring with 2 runs of 6 Sq.mm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 4 Sq.mm FRLS grade PVC insulated copper conductor wire for each continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories all as specified and directed by Engineer-in-Charge.

S&F exhaust fan of 300mm size Make :- Havells/ Bajaj/Orient.. Note :- for cutting hole for exhaust fan of size 6" and finish it with cement and plaster in the ration of 1.6 making good to surface is inclusive of quoted rate.

SRI RAJA RAJESWARI ENTERPRISES

G V REDDY & CO

SRI SIMHADRI COMPANY

M/s Sudersana Traders

HARISH CONSTRUCTION