GE/J/A 2020-21 (8972/E8)

Amount

B/R WORK

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out Soft/disintegrated soil ,complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling in mass conc ,complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately) ,complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 ,complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement ,complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement ,complete all as specified and as directed.

Supply only waterproofing compound isi Marked.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover ,complete all as specified and as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in hard rock ,complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm ,complete all as specified and as directed.

Spreading and levelling in layers n. exc 25 cm thick and well ramming including watering as required ,complete all as specified and as directed.

M&L 40 MM thick PCC 1 :2 :4 type B0 ( using 12.5 mm graded crushed stone agreegrade) as in DPC ,complete all as specified and as directed.

M&L bitumen blown any grade , applied hot , two coats,to concrete surface at the rate of 1.5 kg per sq m per coat.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate ) as in sub base ,complete all as specified and as directed.

M&L Hard core of broken stone or boulders gauge n exc 63 mm , deposited , spread and levelled in layers n.exc 15 cm thick , watered and rammed to a true surface,complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 as in plinth protection, complete all as specified and as directed.

M&L for 20mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L of 18-20mm thick KOTA stone slab, machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and mirror polishing with 15mm thick screed in CM 1:6 ,complete all as specified and as directed.

All as per item No 20 above but in verticle surface using 10 mm plaster in CM 1:4 ,complete all as specified and as directed.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length ,complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 complete.

M&L reinforced cement concrete M-25 (design mix ) as in slab supported on wall beam etc ,complete all as specified and as directed.

M&L reinforced cement concrete M-25 (design mix ) as in beam, contilevers , bressummers, lintel overone meter span ,complete all as specified and as directed.

M&L form work to soffit and suspended slab such as roof slab etc,complete all as specified and as directed.

M&L Form work to side and soffit of floor or roof beam etc,complete all as specified and as directed.

M&L mild steel TMT bar 10 mm dia and over cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip.

M&L mild steel TMT bar 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clips.

M&L 50 mm thick PCC (1:2:4) for water tank plinth ,complete all as specified and as directed.

S&F rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 1000 ltrs. Make:- Sintex/ Rotex/ Polytuff

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms ,complete all as specified and as directed.

S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc ,complete all as specified and as directed.

S/F of bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified ,complete all as specified and as directed.

S& F 15 mm bore CP brass angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe ,complete all as specified and as directed.

S&F 15mm bore PVC connection 600mm long best quality with PTMT nuts complete all as specified and directed.

S&F of chromium plated shower rose as in repair 100mm dia with or with out swivel joints, any size, including fixing to steel pipe all as specified.

M&L Vitrous china wash basin , white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified .Make:- Hindware/Cera/Parryware

Supply only low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection ,complete all as specified and as directed.Make:- Hindware/Cera/Parryware

S&F of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc ,complete all as specified and as directed.Make:- Hindware/Cera/Parryware

S&F chromium plated 15mm dia pillar cock fancy type long neck with aerator ,complete all as specified and as directed.

S & F MS cromium plated peg set of five ,including fixing on wall with wooden gutty screw etc all complete as in repair.

S&F soap dish of PTMT fixed with screws complete.

S&F of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handlescrew both endsfor iron pipe or for union & fixed of 25mm dia all as specified specified.

All as per item No 46 above but 20mm dia

All as per item No 46 above but 15m dia

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 110mm ,complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75mm ,complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings fixed to wall in size 110mm ,complete all as specified and as directed.

S&F PVC (SWR) beds any radius 110mm with oval acess door,complete all as specified and as directed.

All as per item No 50 above but 75mm dia with oval acess door,complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm dia complete all as specified and directed

S&F PVC SWR junction Sigle 'T' equal or unequal 'T'110mm complete all as specified and directed

S&F PVC SWR junction Sigle 'T' equal or unequal 'T' 75mm complete all as specified and directed

S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia complete all as specified and directed

PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement, complete all as specified and directed

S&F MS with PVC coated decorative 25mm curtain rod with fixing brackets etc as in repairs , complete all as specified and directed

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube complete all as specified and directed

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) complete all as specified and directed.

S&F providing pre laminted particle board exterior grade prelaminated both sides and decorative choice fixed for cupboard and shelving complete 25mm thick including teak wood lipping, complete all as specified and directed

S&F hasp and staple of aliminium aodised 75mm in long, complete all as specified and directed

S&F 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anoised, complete all as specified and directed

S&F continuous hinges mild steel briht finish or electroglavnised wodth of flpas 30mm, complete all as specified and directed

M & L PCC solid building blocks 10mm thick type B1 1:2:4 using 20mm graded aggregate set in cement mortat 1:4 complete all as specified and directed

PCC 1:3:6 type 40 mm graded aggregate as in surface channel and drain, complete all as specified and directed

M&L for two coat of colour wash over one coat of white wash on newly plastered surfaces or unplastered surface incl preparation of wall all as specified.

M&L preperartion of newly plastered surfaces of wall and applying two coat of birla putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified and directed

M&L Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified and directed

M&L for three coat of white wash over newly plastered or unplastered surfaces incl preparation of ceiling all as specified.

M&L prepration of new plastered surface and applying three coat of white wash on wall, complete all as specified and directed

S&F of steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified for cooler opening, complete all as specified and directed

All as per item No 75 above but without glazing bars

S&F for 3 mm thick plain glass ordinary quality & glazing.

S&F of 4mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

M& L steel ventilator with top hung shutter including hinges steel peg stay , complete all as specified and directed

All as per item No 79 but as in ventilator top hanging shutter, complete all as specified and directed

S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated, complete all as specified and directed

S&F of 2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,

S&F mild steel work as in doors frames,cooler stand etc. using MS angle iron complete.

100 mm thick Medium weight , cold rolled mild steel butt hinges

S&F of aluminium anodized,tower bolt 200 mm long

S&F aluminium anodised handle cast type of size 150mm long

S/F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring 140 mm long in repairs, complete all as specified and directed

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165, complete all as specified and directed

M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold etc. fast iron fixing including necessary form work all as specified and directed.

M&L for two coat of enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth all as specified.

M&L for two coat of enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10Cm width or girth all as specified.

M&L vitreous china bowl urinal flat black , size of 465 x355 x265 mm white (minimum) with grating and uniun foe discharge pipe , complete all as specified and directed

M&l coloured non skid ceramic tiles 7 to 8 mm thick ( Square /Rectanguler) area of each exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc over 15 mm thick scred bed in cm 1:6 , complete all as specified and directed

Earth filling under floor in layer not exceeding 300 mm in layer complete all as directed. NOTE : Earth to be procured from outside defence land and appproved By GE.

S&F machine made precast cement concrete blocks (interlocking paves) rubberired finished coloured of 60mm thick with 6mm top layers of anti abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

Demolition of stone masonry built in cement mortar , complete all as specified and directed

All as per item No 98 above but except stone complate all as specified and directed.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed.

M&L for glazed colour ceramic tiles of size 250x350x7mm/250x375x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied and directed.

M&L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L of 15-18mm thick machine cut udaipur green marble as in land table work/as in partition cooking plateform steps jamps including cement and jointedwith grey cement slurry with pigment to match the shade of the slab inclpolishing over and including complete all as specified.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M & L one coats of white wash on old surface of wall complete all as specified and directed..

M & L one coats of white wash on old surface of ceiling complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm , complete all as specified and directed

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Mild steel black sheet 1mm thick as in covering to door shutter cut to size, edges beaded if directed, hole punched incl round headed screws incl beading turning up metred angle, stopped ends etc complete all as specified and directed.

Taking down steel window/ventilator , complete all as directed

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded all as specified.

S&F of aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

S&F aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

S &F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)make prayag/polytuf

S&F in repair soap dish of PTMT fixed with screws complete all as specified and directed. Make prayag/polytuf

S&F in repair PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed. Make ploytuf/prayag

S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S & F in repair Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F 110 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 110 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F110 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

S&F75 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

S&F110mm CI bends any radius complete all as specified and directed

S&F 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

S&F 110mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia

S&F PVC SWR pipes 110mm single socketd in any length with rubber rings joints fixed to wall complete all as specified and as directed by engr-in-charge.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and directed

S&F PVC (SWR) bends of dia 110mm

M&L (SWR) guly trap 125/110mm setting and jointing with solvent cement, complete all as specified and directed

S & F in repair of chromium plated shower rose 50mm dia round shape complete all as specified and directed.

S&F in repair chromium plated 15mm dia pillar cock long neck with aerator complete

S&F vitreous china ,half stall type ,white (excluding flushing cistern, flush pipe ,waste pipe as in repair, complete all as specified and directed

S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S&F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia all as specified specified.

S&F in repair bidet spray (Health faucet with 1.5 meter long cp tube and holder complete all as specified. Make jaquar ALD-chr-585

S&F 15 mm dia stop cock cast copper alloy screwed down , high pressure with crutch or butter fly handle screwed bath end for iron pipe or for union and fix complete all as specified.

S & F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange complete

S & F as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange complete

S& F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified

S&F as in repairs of 15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe complete all as specified and directed.

Supply & Fixing low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete

Dismantling water tanks of capacity exc 500 ltrs but.nexc 1000 ltrs and removing to store all as specified.

S&F rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 1000 ltrs including tank lid cover complete with fixing arrangement, complete all as specified and directed Make :- Sntex/Rotex/Polytuff

Disconnecting of existing 1000 ltr capacity PVC tank , seting aside ( or lowering if required ) for repair , cleaning etc. and hoisting and reconnecting and re fixing in position, complete all as specified and directed

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S & F for mild steel work in tubuler posts , rafter, purline etc. including special shaped washer etc. complete using ERW or including butt welded tubes conforming to IS-1161-1976 grade st -240 complete all as specified and directed.

Pre- painted galvatumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repair of high quality looking mirror fancy type 5 mm thick fixed on commecial ply with round decorative wooden frame area n.exc 2.5 sqm complete all as specified and directed.

M&L for Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in curb and bed block of hold fast, coping including necessary form work complete all as specified.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

Taking down or up steel tubing and connection including cleaning for refixing or removal to store (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified

(a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc ,complete all as specified and directed

Taking down existing old tar-felt from RCC roof, stone and other treatment (brick bat coba) etc. careully including cleaning roof surface by wire or coir brush and removing all grits ,stone,fungus,moss and finnaly washing down with water to the entire satisfaction of E in charge and removing debrish and rubbish out of the premises to a distance exc. 1.0 km but not exc 2.5 Km complete all as specified and directed.

M&L for PCC 1 : 2 : 4 Type B0 using 20 mm graded stone aggregate as in levelling course to the roof surface complete all as directed by Enginer-in-Charge.

M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm, complete all as specified and directed

Supply only Integral water proofing compound ( ISI Marked)

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm dia pipe complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

E/M WORK

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing from site of work complete and making good disturbed surfaces of walls, floors, etc.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :-

(a) One light point controlled by one, one way switch

(b) One fan point controlled by one way switch.

(c) One socket outlet 5 pin 6 Amps on same board

(d) One socket outlet 5 pin 6 Amp on independent board

All as per item No 2 above but with using 2.5 Sq mm single core multistanded copper conductor cable and 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board.

S&F switch piano flush type single pole one way 6 Amp ISI Marked.Make: Havells/HPL/Anchor

S&F switch piano flush type single pole one way 16 Amp ISI Marked.Make: Havells/HPL/Anchor

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type .Make: Havells/HPL/Anchor

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked.Make: Havells/HPL/Anchor

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated bodyMake: Anchor/Cona/SSK

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable complete all as specified.

Supply and Fixing LED bulk head light 8/10 watt, including taking down u/s fitting any type Make : Havelles/Philips/Bajaj

Supply and lay cable XLPE insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

S & Replacement distribution board manufacturer prewired , IP 42 in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 4 way make Legrand or equivalent in Havells/Anchor

S&F MCB Single pole 5 to 32 Amp, 10 kA, ISI Marked.

S&F MCB SPN 40 Amp, 10 kA, ISI Marked.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified MAKE;- Havell,s/ Philips/ CG.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 40 Amp, 10 kA, ISI Marked.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

S & F , Ceiling fan 1200 mm Sweep complete with all accessories including fan blades of WHITE COLOUR, ISI Marked energy efficient 5 star rating Connecting up complete with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan ( earth wire to connected to fan hook) Make :- Model Newtec of KHAITAN/CG/ PHILIPS/Orient.

M&L for providing of exhaust fan 300 mm , 230 volt, 50 Hz , heavy duty electrically and mechanically by all means complete with fastner nut , bolts & washers with louvers

S&F storage water heater (Geyser) of 25 ltr capacity including grouting of four Nos fashners with nut,bolts & washers of suitable size as directed in wall and making good in the disturbed surface and match with existing surface complete including all electric and water supply connections.

S&F in replacement of water supply PVC connection 15 mm dia with PTMT nuts and washer 45 Cm long all as specified and directed.

S&F Gund metal gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified.

S&F GI pipe 15mm dia medium grade ISI marked incl cutting fixing arrangements etc complete all as specified

Supply and fix self cosing taps cast copper alloy chromium plated screwed for iron pipe and fixed 15mm bore. Make : Jaquar/Marc

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 10 sq 2 core in service connection. Make polycab/Havells/Finolex

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Dwarka Enterprises

D DEV COMPANY

DEEKSHA BUILDERS