SPECIAL REPAIRS TO INSPECTION BUNGLOW BLDG IN OFT ESTATE AT OFT TRICHY UNDER GE I P FY AVADI

Amount

B/R ITEMS :Surface excavation in hard and dense soil n.exc 30cm deep and average 15cm deep

Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L Sand filling under floors or in foundations including watering and consolidation for 50mm thick

Demolition of brick masonry built in cement mortar

Dismantling of brick masonry built in cement mortar

Demolition of stone slabs and tiles of any description laid, bedded and pointed in any mortar including backing / bedding layer

Demolition RCC of any description and in any position reinforced like RCC OH tank , lintel bands, shelves etc

Demolition PCC of any description and in any position and thickness not otherwise specially provided for as in old roof treatment & like etc complete as per direction

Dismantling wrought iron or mild steel work of any description not otherwise provided for (Staircase Hand rail, grill work etc)

Dismantling boarding, any description, fixed in any position with nails

Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water etc.

Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store

Taking up or down steel water tubing and connections, including cleaning,and refixing in new or old position (Floor, wall, ceiling) bore of pipes 25mm dia

Taking up or down steel water tubing and connections, including cleaning,and refixing in new or old position (Floor, wall, ceiling) bore of pipes 20mm dia

Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each.

Taking down chowkats/Frames of area exc 1.5 Sqm and n.exc 4.0 Sqm with shutter (without taking off shutters from the frame) each.

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each and refixing in same opening after easing and adjustment all as specified and directed.

Taking down shutters of any description exc 1Sqm and n.exc. 2 sqm each all as specified and directed.

Taking down shutters of any description exc. 2 sqm each all as specified and directed.

Roughening surface of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc.

M & L for reinforced cement concrete 1:1.5:3 type A1 using 20 mm graded stone aggregate as in kitchen platform slab, shelf etc, complete all as spcified Note : Reinforcement and formwork shall be measured and paid separately.

M & L for plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) 25mm thk as levelling course / padding concrete on roof surface, covings etc complete all as spcified

M & L for providing plain cement concrete 1:2:4, type B1 (using 12.5 mm graded aggregate) as in haunching roof of wall junctions and floor of OH tank in roof surfaces finished even and smooth without using extra cement, including necessary formwork, all as specified and as directed

M & L for brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified

Cutting holes in to brick wall built in cement mortar exc half brick & n.exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for inserting holdfast & rafters and similar works as specified and as directed

Cutting chases on brick walls, pinning in, making good to facings where required and pointing in CM 1:3 for concealed water tubing cutting not exc 10cm girth complete all as spcified

M & L for form work to sides and soffits of suspended slabs such as kitchen slab,shelf slab etc, fair finished flat surfaces n.exc 200mm thk complete all as specified

S&F 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint complete all as specified

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides complete all as specified

S&F 2nd class Hard wood glazed/skeleton shutters 30mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc (size of members of shutters shall be as specified in clause 8.24(b) of SSR part I.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 75mm type D-22 complete all as specified

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 100mm type B-21 complete all as specified

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm complete all as specified

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm complete all as specified

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm complete all as specified

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm complete all as specified

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia. complete all as specified

S&F Stainless steel Grade 304L tubular pipe of any diameter,bend and 1.0 to 1.2mm thickness as vertical post, handrailing etc including polishing, welding, moulding etc all as specified and directed

S&F Stainless steel Grade 304L steel ball upto 2" diameter fixing to vertical post including polishing etc all as specified and directed

S&F Stainless steel Grade 304L steel base cup upto 2" diameter fixing to vertical post including polishing etc all as specified and directed

S/F structural steel work as in roof trusses , purlins including distance pieces, cleats etc,including welding, riveting as required conforming to Fe 410-W (Gde -E-250) quality - A complete all as specified

M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 complete all as specified

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified

S & F 0.63mm Mild steel, plain, black sheet in ,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws,including crimp at edge as specified and as directed

M & L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified

M & L Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and match with existing design (Frame work for ceiling shall be measured and paid separately) and applying a coat of 3mm thk wall care putty complete all as specified

Providing and laying waterproofing treatment on the roof slab with single component UV resistant, moisture cure highly elastomeric and tough water proofing membrane having elongation of >500% tensile strength >4 N/mm2 as per ASTM D412, tear strength>2.5 N/mm2 as per ASTM D624 using PU applied at 1.2 Kg/Sqm in two layers with DFT of minimum 1mm over a coat of primer using Bostik Ultraseal PU/STP/FOSRAC primer at 200 gm/Sqm or equivalent including surface preparation, making free from dust,dirt,laitance etc using compressed air, opening the surface cracks in a V groove and filling with Shaligrout EI/ Flowfill grout of Bostik/ Sika grout or other equivalent make all complete as per manufacturers specification and instructions.

Supply only liquid water proofing compound

M&L rendering 10mm thick for vertical surface of wall cement mortar 1:4 as in bedding layer for receving tile complete all as specified

M&L rendering 15mm thick for vertical surface of wall cement mortar 1:4 as in bedding layer for receving tile complete all as specified

M&L rendering 15 mm thick brick walls/concrete surfaces with CM 1:6 finished even & fair complete all as specified and as directed

M&L rendering 15 mm thick on brick / concrete, wall surface with CM 1:4 with water proofing compound finished even & fair complete all as specified and as directed

M&L rendering 10mm thick on ceiling surface with cement mortar 1:3 finished even and fair

M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified

M&L screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cm 1:6 complete all as specified

M&L rendering 15 mm thick on roof top surface with CM 1:4 with water proofing compound finished even & fair complete all as specified and as directed

M&L coloured light shade Vitrified Ceramic tiles upto10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile complete all as specified.

M&L coloured non skid ceramic tiles of 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile complete all as specified.

M&L glazed ceramic coloured tiles in vertical surface 450x300x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tile complete all as specified.

M&L Granite black colour slab 17mm to 18mm thick machine cut in floors, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including,edge moulding,rounding, grinding and polishing complete etc as in staircase / kitchen platform slab and similar work complete all as specified

M&L Granite black colour slab 17mm to 18mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including edge moulding,rounding, grinding and polishing complete all as directed

M&L chequered Cement concrete tiles 25cm x 25cm x 20 to 25mm thick,of any colour, pattern with glazy finished machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments all as specified (Make : Ultra, Eurocon or other equivalent make as approved)

M & L Machine pressed precast interlocking paver block of any shape,colour and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade complete all as specified (Make : Ultra or other equivalent make as approved)

M & L for cutting,grinding & polishing (Wax / Mirror polishing) over terrazo, marble,kota stone flooring/skirting dado etc complete all as specified and directed by Engr - in - Charge

M & L for preparation of Newly plastered wall surfaces and applying two coats of OBD incl one coat of primer over a coat of wall care putty complete all as specified and directed by the Engr-In-Charge

M & L for preparing newly plastered surfaces and applying three coats of white on ceilling / facia complete all as specified

M & L for preparation of old decorated surfaces of ceiling and applying two coats white wash evenly complete all as specified.

M & L complete removal existing treatment on wall surfaces and applying two coats of oil bound distemper incl one coat of primer over a coat of wall care putty complete all as specified

M & L for preparation of old decorated wall surfaces pillasters, including cornices and applying two coats of white wash complete all as specified (including preparation of surfaces)

M & L for preparation of newly plastered external wall / ceiling surfaces and applying two coats of weather proof paint including a coat of primer complete all as specified and as directed

M & L for preparation of old undecorated external wall / ceiling surfaces and applying two coats of weather proof paint including a coat of primer complete removal of existing finishes complete all as specified

M & L for preparation of old decorated surfaces of wood work exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.(including preparation of surfaces)

M & L for preparation of old decorated steel surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M & L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M & L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M & L for preparing old wooden surfaces of any description and two coats of French polishing all as specified

M & L for preparing new ceilng surfaces of any description and applying two coats of emulsion paint over a coat of primer complete all as specified and directed

M&L for preparing small articles such as hold fasts, end of posts etc. of area n.exc 0.1Sqm and treated with Cresote Oil complete all as specified

M&L for preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but n exc 0.5 sq m each and treated with tar or coat tar black paint complete all as specified

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads

S&F 4mm thick sheet glass fixed in squares n.exc 0.5 Sqm in each panes with wooden beading or glazing putty etc complete all as specified

S&F 15 mm dia bore of pipes medium grade galvanised with all fitting and fixture complete etc to walls and ceiling or laid in floors including taking down all as specified and as directed

S&F 20 mm dia bore of pipes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors including taking down all as specified and as directed

S&F 25 mm dia bore of pipes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors including taking down all as specified and as directed

S&F in repairs 15mm dia fancy type concealed CP long shank and cup stop valve cast copper alloy screwed down high pressure screwed both ends for pipe or for union with approved make complete all as specified

S&F in repairs15 mm bore CP Bib tap long body cast copper alloy fancy type knob type handles, threaded and fixed to GI pipe and the like, confirming to IS 8931 - 1993 with approved make complete all as specified

S&F in repairs 15 mm bore Pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified

S&F 32mm bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified

S&F in repair 15mm bore fancy type CP two way bib cock long body double handle with flange (For health faucet) (Make; Prayag Cat No 7812 or equivalent make and specification)

S&F in repair 15mm bore fancy type CP Pillar cock central hole basin mixer without Pop-up waste system (Make; Prayag (Ripples), Cat No 8650 or equivalent make and specification)

S&F in repair 15mm bore fancy type CP angle cock with flange (Make; Prayag , Cat No 7810 or equivalent make and specification)

S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified

S&F Chromium plated health faucet with 1mtr Tube & Hook with approved make complete all as specified

S&F CP Single flow hand shower with 1.5m Flexible tube & Hook with approved make (Make; Prayag Cat No BH-76 or equivalent make and specification)

S&F CP Wall mixer bib tap telephonic with crutch (Provn for hand shower) with approved make (Make; Prayag Cat No 7870 or equivalent make and specification)

S&F in repairs 100mm dia CP grating with or without hole incl jointing to waste pipe complete all as specified

S&F 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified

S&Fin repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in position complete all as specified

S&F 75mm dia UPVC Pipes (SCH-80),waste/ soil pipes including all necessary fittings (heads, bends,door bends,Tee joints,vent cowl) etc., all as specified

S&F 100mm dia UPVC Pipes (SCH-80),rainwater pipes,waste/ soil pipes including all necessary fittings (heads, bends,door bends,Tee joints,vent cowl) etc., all as specified

S&F Kitchen Sinks with drainage board made of Stainless Steel 1mm thick kitchen with plugs washers,waste coupling and waste down pipe incl bedding in cement mortor on to dwarf wall and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia CP waste coupling complete all as specified

S&F in repair viterous china WHB white flat back of size 550x400mm incl GI Brackets,waste down pipe CP brass waste coupling with check nut and washers of suitable size complete all as specified

S&F in repair counter top Viterous china wash basin(oval shape) white fixing on granite slab including cutting necessary holes for fixing complete of size 630x500mm including connecting to inlet and outlet including waste coupling and waste down pipe etc (Make; Hindware (RHAPSODY) Star white, Cat No 10045 or equivalent make and specification)

S&F in repair Pedestal pattern viterous china WHB white of bowl size 550x450mm incl GI Brackets,waste down pipe CP brass waste coupling with check nut and washers of suitable to be complete (Make; Hindware (Cedar), Cat No 91116 or equivalent make and specification)

S & F in repairs Vitreous China wash down water closet pan 'P' or 'S' trap (pedestal pattern), white,including seat cover,fixing bolts,flushing cistern and flush pipe (Make; Hindware (Tango), Cat No 21051 or equivalent make and specification)

S&F in repairs Vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest incl,trap, bend, PVC flushing cistern 10ltrs capacity and flush pipe etc and making good to floor complete all as specified

S&F Glossy finish brass bathroom towel rack 600mm long(Make; Prayag Cat No BA - 22 or equivalent make and specification)

S&F Glossy finish brass bathroom towel ring(Make; Prayag Cat No BA - 21 or equivalent make and specification)

S&F Glossy finish brass toilet paper holder (Make; Prayag Cat No BA - 58 or equivalent make and specification)

S&F brass chromium plated fancy type tubular towel rails 20mm dia D type 60cm long between flanges with approved make complete all as specified

S&F Sheet glass shelf assembly consisting of 5.5mm thick single layer sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Disconnecting existing tanks 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if requiredreconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified

S&F Rotational moulded polyethylene water storage tank 3 layered ISI marked (cylindrical Vertical with closed top) hoisted and fixed in position all as specified 2000 Ltr Capacity

E/M ITEMS : Dismantaling and taking down point wiring any type of conductor / size complete with removing all connection and accessories such as switches, sockets, ceiling rose, pendent holder, fan regulator any type, all type of fitting, batten, steel or PVC conduit, casing caping etc. complete and making good the disturbed surface as per exsiting wall / ceiling finishes complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully by unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceilings fittings, bulk head fittings, tube light fittings and regulators, AC point, Energy meter etc. complete all as specified and directed.

Taking down old and unserviceable existing sub main wiring of any size/type/core including earth wire complete batten/conduit etc and making good the disturbed surface to match the existing disturbed surface complete all as directed by Engr-in-Charge.

M&L for concealed Point wiring complete with 1.5 Sqmm for light point PVC insulated unsheathed, FRLSH cable, 1100 volts grade conforming to IS 694, multistranded copper conductor, cable drawn through and including in PVC conduit medium grade ISI marked , minimum 20mm dia, and connected accessories mounting on modular metal box in surface of walls/ceilings/roofs/steel sections etc for mounting of switches, sockets outlets, regulators etc. including provision of FRLSH cable, PVC unsulated, 1100 volts conforming to IS 694 one run of unsheathed multistranded copper conductor of size 1.5 Sqmm as earth continuity conductor and connected to common earth dolly and complete all as specified and as directed for the following: Note: (1) Quoted rate deemed to include for cutting chases of required size for fixing of mild steel boxes, PVC pipes and making good the disturbed surfaces to match with the adjoining undisturbed surface/finishes. Notes: Modular metal boxes shall be measured and paid separately.

(a) One light point controlled by one way one switch SP 5 Amps ,240 V.

(b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.

(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

(d) One switch socket outlet 3 Pin, 5 Amps, SP on same board.

All as per the above item No 4 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.

M&L for Point wiring complete with 1.5 Sqmm for light point PVC insulated unsheathed, FRLSH cable, 1100 volts grade conforming to IS 694, multistranded copper conductor, cable drawn through existing conduit and connected accessories mounting on modular metal boxes surface of walls/ceilings/roofs/steel sections etc for mounting of switches, sockets outlets, regulators etc. including provision of FRLSH cable, PVC unsulated, 1100 volts conforming to IS 694 one run of unsheathed multistranded copper conductor of size 1.5 Sqmm as earth continuity conductor and connected to common earth dolly and complete all as specified and as directed for the following: Note: (1) Quoted rate deemed to include for cutting chases of required size for fixing of mild steel boxes and making good the disturbed surfaces to match with the adjoining undisturbed surface/finishes. Note:- Modular metal boxes shall be measured and paid separately.

(a) One light point controlled by one way one switch SP 5 Amps ,240 V.

(b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.

(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

(d) One bell / buzzer point controlled point controlled by one push button on the same board with other switches or independent with cables 1.5 Sqmm size.

(e) One switch socket outlet 3 pin, 5 Amps , SP on same board.

All as per the above item No 122 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.

All as per the above item No 122 herein before but with 4 Sqmm cable for AC metal plug socket.

M&L for sub main wiring with two runs of 6 Sqmm for phase and neutral 1100 volts grade single core FRLSH insulated unsheathed multistranded copper conductor ,drawn through and including concealead PVC conduit of minimum 20 mm nominal dia, ISI MARKED with all conduit accessories mounting on modular metal box on surface of walls / roofs / floors etc. with one run of 6 sqmm single core FRLSH insulated unsheathed with one copper conductor as earth wire complete all as specified and directed. Note:- (i) Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of conduit will be measured as one unit. (ii) Quoted rate deemed to include for making good the disturbed surface to match with the existing adjoining undisturbed surface / finishes complete all as specified and as directed by Engineer-in-charge.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M& L modular switch 1 way 230 volt 6A ,1 module all as specified.

M& L modular switch 1 way 230 volts 16A all as specified,1 module.

M&L for modular bell push 6 Amps, 1 module all as specified.

M&L Modular Socket 6A-2/3 pin combined 2 module all as specified.

M&L Modular Socket 6A/16A-2/3 pin combined 2module all as specified.

M&L.Modular fan step regulator, 100 W- 2 Moudle all as specified.

M&L modular metal flush box for 1/2 module all as specified.

M& L modular metal flush box for 3 module all as specified.

M& L modular metal flush box 4 module all as specified.

M& L modular metal flush box 6 module all as specified.

M& L modular metal flush box 8 module all as specified.

M&L modular white cover plate with frame 1/2 module all as specified.

M&L modular white cover plate with frame 3 module all as specified.

M&L modular white cover plate with frame 4 module all as specified.

M&L moudular white cover plate with frame 6 module all as specified.

M&L modular white cover plate with frame 8 module all as specified.

S&F ceiling rose surface backlite 65 x 20 mm size three terminal complete.

S&F LED tube light fittings and fixtures 22Watt, 240 volts, 50 Hz with indoor decorative PVC Extruded batten integrated LED driver complete with all accessories internally pre-wired and including LED tube rod and connecting up with twin core twisted flexible copper conductor cable of suitable size, PVC square / round box (2 Nos) complete all as specified and as directed. Make:- Havells Cat Part No ENDURALINEARNEOBS22WLED865SPCWH or equivalent to Wipro / Bajaj

Labour only fixing of serviceable light point obtain from SI No 2.

S&F lamp angle holder batten type Polycarbonate with back plate non metallic body fixed on PVC square box of suitable size with screws complete all as specified and as directed.

Supply and fixing of LED Lamp, 05 watt 240volts, 50HZ, base, B22 self intrigrated drive complete. Make: LED Bulbs : Havells/Wipro/Philips/Crompton Greaves

S&F Helix LED - LD 91 High efficiency recess mounted Circular LED downlighter of system wattage 15 Watt, 240 volts, 50 Hz with CCT (K) 6500 indoor decorative mounted on POP / Gypsum ceiling of cutout dimensions dia 165mm integrated LED driver complete with all accessories internally pre-wired connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- Wipro Cat Part No LD91-201-XXX-65-XX or equivalent to Havells / Bajaj / Philips

Supply and fixing bell multi music type AC 230 Volts, single pole type complete all as directed by Engr-in-charge.

M&L earthing complete with GI earth plate electrode of size 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia GI earth strip as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel, protected GI pipe light grade 15mm bore all as shown on electrical plate No. 3 of SSR Part-I connected to the main board / distribution, board / transformer body / netural / lightining arrester complete all as specified and as directed. Notes: 1) The unit rate is inclusive of excavation and earth work in any type of soft loose soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 cover 50mm thick reinforced with TMT bars 8mm dia @ 50mm c/c both ways, funnel with GI watering pipe 20mm dia light grade, GI protection pipe light grade 15mm dia and wire mesh complete.

S&F 240V 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SPN.

S&F MCB SPN, 40 Amps, 240 Volts, rupturing capacity 10 KA."C" Series.

S&F MCB SP, upto 40 Amps, 240 Volts, rupturing capacity 10 KA "C" Series.

S&F Sheet metal enclosure for distribution board SPN, 8 way, 240 Volts, sheet metal, powder coated, IP 42 protection with 200 Amps minimum rated bus bar double door vertical type concealed in wall as per site requirement complete all as specified and as directed. Note: (a) MCBs etc shall be measured and paid seperately.

S & F Distribution board, TPN, 4 way, 415 volts with provision for DPX 63 to 160 MCCB as incommer and SP/TP MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Cat No. 607913 of LEGRAND or equivallent make of L&T/ C&S.

Supply and fix 4 Pole MCCB 125 to 160 Amp, 50 Hz, 415 V with rupturing capacity 36 KA. Make : Legrand Cat Part No 4207 19 or equivalent to Havells / C&S

M&L for in existing brick wall cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring , etc and making good, cutting not exc 10 cm girth and not exc 20 cm girth.

M&L for non metelic,rigid, PVC conduit with accessories concealed in wall for drawing telephone / TV cables all as specified for the following sizes :

a) 20mm dia bore

b) 25 mm dia bore

S&F PVC insulated overall PVC seathed, twin core cable with copper conductor suitable for Telephone drawn through condute all as specified. Make : Havells Cat Part No WHTTATEA4P40 or equivalent to Finolex / Polycab

S&F PVC insulated overall PVC seathed, twin core cable with copper conductor suitable for TV connection drawn through condute all as specified. Make : Havells Cat Part No WHOJTTKARG59 TYPE-RG 59(Foam) or equivalent to Finolex / Polycab

M&L for modular type TV Co-Axial socket -1M all as specified and directed Make : Havells Cat Part No AHOKTOW061 or equivalent to Legrand / L&T.

M&L for modular type Telephone Co-Axial socket - 2M all as specified and directed Make : Havells cat Part No AHOKROW112 or equivalent to Legrand / L&T. NOTE FOR ITEM NO 161 & 162 :- Pvc conduit and conduit accessories measured and paid under approximate items

S&F modular white cover plate with frame 1 module.

S&F sheet metal box of size 75 X 75mm including fixing of Telephone Socketand TV Socket with hylam sheet.

Taking down old and unserviceable existing earth plates and GI pipes and all connected accessories of any size / type of earth plate & GI pipe complete all as specified. Complete and making good the disturbed surface to match the existing distrubed surface/finishes complete all as specified and as directed by Engineer-in-Charge.

S & F exhaust fan 300mm sweep PVC body 230 v / 240v AC single phase with louvres square type including making suitable size of hole with grouting suitable size of nuts, bolts & washers,plastering, electrical connection complete all as directed by Engr-in-charge. Make: Khaitan/ Orient/Crompton Greaves/USHA / Havells

Supply and fix home Décor Lighting GOBLETTO WL 1LS E14 SS type Decorative , wall mounting, brushed nickle finish fixture with opal glass diffuser suitable for 4 Watt, 50 Hz , 240V, candle / A45 LED filament lamp E14 Base, including complete all as specified and as directed by Engineer -in-charge. Make: Havells Cat Part No. LHFOAKC1TZ1IO40 or equivalent to Bajaj / Philips / Wipro

al mecho fab