REPAIR REPLACEMENT OF INTERNAL WATER SUPPLY IN MD ACCN AND OTM ACCN AT RAMGARH CANTT UNDER GE RAMGARH

Amount

Dismantling wrought or mild steel work of any description and in any position complete all as specified and directed.

S & F framed work such as grill grating etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors and similar works conforming to Fe-410-0 or Fe 310-0 including all necessary welding complete all as specified and directed by Engr-In-Charge .

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)

M & L for RCC 1:2:4 type B1(using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, base of floor, complete all as specified and as directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finishing external surface even and smooth without using extra cement, complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finishing external surface even and smooth without using extra cement, complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base primer, complete all as specified & directed.

M & L applying three coat of white washing including preparing of new plastered wall surfaces, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

M & L for 25 mm thick concrete (1:2:4) type B-1 using (25 mm graded crushed stone aggregate) as in floor and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x200X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for 10 mm thick rendering or bedding layer in cement mortar 1:4 for vertical surfaces of walls, complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M & L brick work with sub class 'B' old size bricks straight on curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge .

All as per item No. 17 here-in-before but except bricks, using old serviceable bricks as retrieved from item No. 2.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 25mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 15 mm bore, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 20 mm bore, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 25 mm bore, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in trenches/wall/ceiling/floor suitable for 15 mm dia pipe, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in trenches/wall/ceiling/floor suitable for 20 mm dia pipe, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in trenches/wall/ceiling/floor suitable for 25 mm dia pipe, complete all as specified and as directed.

S & F 15mm dia bore bib tap cast copper alloy chromium plated, fancy type, with capstan head handle screwed down, screwed for iron pipe, complete all as specified and directed.

S & F in repair 15mm dia bore bib tap cast copper alloy chromium plated, fancy type, with capstan head handle screwed down, screwed for iron pipe, complete all as specified and directed.

S & F in repairs 15 mm bore angle stop cock fancy type, brass chormium plated with CP wall cap, complete all as specified and directed.

S & F in repairs 15 mm bore angle stop cock fancy type, brass chormium plated with long shank (concealed type) with CP wall cap, complete all as specified and directed.

S & F in repair rotational moulded polythene water storage tanks, double layered (cylindrical vertical with closed top) of capacity 500 lit, hoisted and fixed in position after dismantling old one, complete all as specified and asd directed.

S & F in repair rotational moulded polythene water storage tanks, double layered (cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position after dismantling old one, complete all as specified and asd directed.

S & F in repair rotational moulded polythene water storage tanks, double layered (cylindrical vertical with closed top) of capacity 2000 lit, hoisted and fixed in position after dismantling old one, complete all as specified and asd directed.

S & F 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule including taking down old one complete all as specified and directed.

S & F in repair 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule including taking down old one complete all as specified and directed.

S & F in repairs stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of bore 20mm complete all as specified and directed and as directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets with 32mm dia PVC flush pipe, connections and making good the disturbed surfaces in cement mortar (1:3), complete all as specified and directed.

S&F in repairs vitreous china water closet (squatting pan), orissa pattern size 580 x 440mm, white with integral foot rests and including 'P' trap and including provision of lime concrete bedding making good to floors complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet, flush pipe,fixing bolts, complete all as specified and directed.

S & F in repairs vitreous china urinals half stall type pattern, white including including connection to flushing pipe and outgoing pipe wash hand basin flat back of size 550x400 mm, including 32mm CP brass waste fitting, 32 mm PVC waste pipe, cast iron brackets and PCC (1:2:4) type B-1, using graded stone aggregate for embedding brackets and making good disturbed surfaces with CM (1:3), complete all as specified and as directed.

S & F in repair, vitreous china ware wash hand basin, white, flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets and PCC (1:2:4) type B-1 using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM (1:3), complete all as specified and directed.

S & F 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 450 mm long PVC connection pipe of approved quality with brass check nuts at both ends for 15mm bore pipe, complete all as specified and as directed.

Taking down eaves gutter soil waste and vent rain water pipe 75 to 110 mm dia, including all fittings, complete all as specified and as directed.

M & L PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors 110 mm bore complete all as specified and directed.

M & L PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with necessary clamps etc., 110 mm bore complete all as specified and directed.

S & F (SWR) 110 mm dia bends any radius with rubber ring joints, complete all as specified and directed.

M & L PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and directed.

M & L PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors 75 mm bore complete all as specified and directed.

S & F PVC (SWR) 75 mm bore bends any radius, complete all as specified and directed.

S & F PVC (SWR) 110mm bore branch piece, single (double Y) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 75mm bore branch piece, single (double Y) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 110mm bore junction single (Single T) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 75mm bore junction single (Single T) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 110mm bore junction double (Double T) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) 75mm bore junction double (Double T) equal or unequal, complete all as specified and directed.

S & F PVC (SWR) vent cowl, size 110mm bore complete all as specified and directed.

S & F PVC(SWR) floor trap 75mm dia plain with grating including jointing with solvent cement, complete all as specified and as directed.

Raj Construction

M/S Popatlal A. Rathod

M/S Kunwar Construction

M/S SHAMBHU SHARAN SINGH

M/s Ray construction

M/S Bhushan Kumar Jain