Childrens Park

BLD-CSTN-2-1 (9): Earth work excavation in Ordinary Soil by Manual Means-Upto 3 m depth for structures in all types of soil as per drawing and technical specifications and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). Proposed 2.10m Wide Tiled Pathway

Amendment 2021-22 BLD-CSTN-2-8 (16) : Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

BLD-CSTN- 2-8 modfied in 2021-22 : Filling with HBG stone chips of 2.36mm and below in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Cast in Situ Cement Concrete M20 Kerb: Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH.

Providing and Laying of Interlocking Concrete Block Pavements using precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's Specification including c0st and c0nveyance of all materials and all labour chrges etc, complete as per drawing and Technical Specification Clause 1504 MORD

Drilling of Bore well by down the hole hammer (DTH) drilling to finished dia of 163 mm in all formations to the depth specified and reaming the bores to the required dia flushing the bore walls at an average pressure of 7 kg/cm2 (100 PSI) conducting yield test, inclusive of transportation from point to point, crew charges, cost of consumables, shifting of Rig and all other charges etc,.The bore wells should be true & vertical and work should be carried out to the satisfaction of the department and carried out as per IS 2800 I & II / 1979 and amendments if any from time to time, etc,. complete as applicable. up to 90.00m depth

Drilling of Bore well by down the hole hammer (DTH) drilling to finished dia of 163 mm in all formations to the depth specified and reaming the bores to the required dia flushing the bore walls at an average pressure of 7 kg/cm2 (100 PSI) conducting yield test, inclusive of transportation from point to point, crew charges, cost of consumables, shifting of Rig and all other charges etc,.The bore wells should be true & vertical and work should be carried out to the satisfaction of the department and carried out as per IS 2800 I & II / 1979 and amendments if any from time to time, etc,. complete as applicable. above 90.00m depth

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes.-160mm dia PVC Casing pipe of 6kg/cm2 including cost and conveyance & all labour charges.

Supply and Transportation of ------------ -------- single phase ISI submersible motor pumpset suitable for 4" Borewell. Makes: Flowell / Waterman / Ellen / Kirlosker / Narayani / Sai Varsha / Sterling / Duke / Samudra / Ajantha 2.00 HP 25Stage Rate as per SoR item ELEC-5.6.1.a

Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete. Panel board up to 3HP Motors

ELEC-1.2.3 - a : Supply of 20mm SWR reinforced flexible condudt pipe Make: Precision or its equivalet

ELEC-1.6.3 : Supply of 3 core 2.50 Sqmm flat Copper cable for ISI for submerssible pump. 3 core 2.50 Sqmm cable,

Manufacture, supply & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in 6 M). 40mm dia suction pipe 16kg/cm2

ELEC-5.13.6 : Supply and delivery of MS Clamp set 45mm length,12mm thick plate, 75mm wide with 6Nos of 16mm dia Bolts & Nuts at site of work for pump installation including cost and conveyance of all materials,and transit insurance etc, complete. 50mm dia

Supply and delivery of Gate Valves leaded in tin bronze screwed internal bends, screwed on bonnet internal seat design to IS 778/ 84 with its ammendments class - 2 of sizes ISI Marked including cost and conveyance, transit insurance all labour charges etc., complete.- 50mm dia

TBSP-G.III-19 : Supplying & fixing Bronze Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size including cost and conveyance, all labour charges etc., complete. 50mm dia

ELEC-5.13.5 : Supply & fixing of 50mm Dia MS Galvanised Bore Cover including cost and conveyance, transit insurance all labour charges etc., complete

TBSP-G.I-01:Supplying & fixing GI pipe Medium Grade as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chasing masonry walls and making good the walls & floors to the originals, surface and fixing MS clamps of TW block on walls, including cost and conveyance of all materials and labour charges complete for finished item of work. 50mm dia GI pipe from Bore well

TBSP-G.I-01:Supplying & fixing GI pipe Medium Grade as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chasing masonry walls and making good the walls & floors to the originals, surface and fixing MS clamps of TW block on walls, including cost and conveyance of all materials and labour charges complete for finished item of work. 40mm dia GI pipe

TBSP-G.I-01:Supplying & fixing GI pipe Medium Grade as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chasing masonry walls and making good the walls & floors to the originals, surface and fixing MS clamps of TW block on walls, including cost and conveyance of all materials and labour charges complete for finished item of work. 25mm dia GI pipe

TBSP-G.III-01:Supplying & Fixing Bronze Vertical Check(Non return Valve) as per IS-778 I-class heavy duty 50mm dia

TBSP-G.III-01:Supplying & Fixing Bronze Vertical Check(Non return Valve) as per IS-778 I-class heavy duty 40mm dia

TBSP-G.III-01:Supplying & Fixing Bronze Vertical Check(Non return Valve) as per IS-778 I-class heavy duty 25mm dia

ELEC-8.5.1:Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs . Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool , and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp. Makes : BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL

ELEC-8.7.1: Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete including soil testing.

Supply and transportation of 120 W +/-10% (>=12000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA./ Capart / Fortune Arrt / FIEM / Arraystorm / GM / Goldmedal / Panasonic / Silicon / Leksa / Orient / HPL LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs.

ELEC-8.6.1.b:Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole isolator as incomer, 6 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch 63A,4Poles Isolator as incomer ,6no's 6-32A SP MCB

ELEC-4.1.1.e: Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin / Ollvin / Finecab / RPG / V - Guard / Orbit/ Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab / Nakoda / Suncab

ELEC-4.1.1.f: Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin / Ollvin / Finecab / RPG / V - Guard / Orbit/ Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab / Nakoda / Suncab

ELEC-4.9.1 (b): Supply and Transportation including Earth work excavation and laying charges of Outer dia 63mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj /Gamson / Ultra Plus / CPE

ELEC-4.3.1.b:.Supply of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for Up to 16.0 Sq.mm 4 Core XLPE insulated armoured cable etc complete. Makes: SMI / Commet / Dowels.

ELEC-4.4.1.a:Supply of heavy duty long barrel copper lugs confirming to I.S specifications suitable for Up to 16 Sq.mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

ELEC data -8.19.7 : Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

BLD-CSTN-2-1-(9) -Earth work Excavation for Foundation Ordinary Soil-Manual Means-Upto 3 m depth: Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) 01. Kids Play Area Taken From Cad Drawings 02. Rainbow Ladder 03. Two Pillar Multiplay Station 04. Double Arc Swing 05. Platform MGR

Amendment 2021-22 BLD-CSTN-2-8 (16) : Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Sand Filling Kids Play area

Concrete Mixer : Plain Cement concrete nominal mix (1:3:6) prop (Cement : fine aggregate: coarse aggregate) using 20mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. 01. Rainbow Ladder 02. Two Pillar Multiplay Station 03. Double Arc Swing 04. Platform MGR

Rainbow Ladder 1)Rainbow Ladder:2 no’s 48mm Dia GI Pipes bent into semi- Circle shape with the distance of 24” and 25 mm Dia Pipes welded in between the two Pipes like Ladder Type 2) Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 10. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D3359) with the help of cross hatch cutter instruments. 11. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 12. All open ends of pipe been closed by GI caps for user safety against entrapment. 13. Certificate: ISO9001:2015 14. Color: Multicolor for optional or customized & As per RAL shade. 15. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Equipment Size : L x W x H : 3535mm x 609mm x 1524mm

Two Pillar Multiplay Station 1. Platform:- a. Material:- Checkered Plate with anti-skid surface on top. b. Thickness:- Minimum thickness of 3-5 mm and side flanges of 5-8 mm thickness. c. Size:- 40 x 40inch d. Others:- Ribbed structure on bottom side. e. Shape:- Square. f. Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. h. Vertical Pipes:- 80NB GI pipes should be used of Medium Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 2. Double Wave Slide :- a. Size:-9ft3inch Slide b. Material:- Wave Slide Chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The landing of the slide is supported by stand made up of 25NB pipe and 5mm thick MS plate with GI plating. 3. FRP Spiral Slide Slide :- a. Size:- 5ft Slide b. Material:- FRP Spiral Slide Chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The landing of the slide is supported by stand made up of 114mm pipe and 3mm thick MS plate with GI plating. 4. FRP Canopy Mushroom :- The canopy is made of FRP (Fiber Reinforced Plastic) with a minimum thickness of 2-3 mm. 5. Two Seater Swing Swing frame 76mm Pipe used 10ft long.The chain is made from 8mm thick galvanized chain. FRP Seating The frame is made from 50 x 3mm Plat Patty. The chain is over-hanged with the help of Heavy Duty Hinjuice.. 6.Two Seater See Saw: Two Numbers Seats Made With FRP Fiber Seats and Fitted Boath Ends of 76mm Dia Pipe Length 8ft with Bolts and Nuts Both fitted on Horizontal pipe 2.6Length and 76mm Dia U Shaped ( reverse) with clamps with fiber sheets Length x Width x Height : 2438mm x 914mm x 914mm 7. MS Step Ladder :-a. Size:- 5 Ft b. Material:- MS with a minimum thickness of 3-5mm. Ribs are provided at defined distance to improve strength as well as aesthetics of the bridge.. c. Suitable Railiing Made up 33OD GI Pipe 8. FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material should be tested for abrasion resistance & UTS (ultimate tensile test). 9. Pipes:- All metal pipes should be used of Heavy Duty ('B' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 10. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 11. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 12. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. 13. Certificate: ISO9001:2015 14. Color: Multicolor for optional or customized & As per RAL shade. 15. Packaging: Safety 3 layer ackaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Play Equipment Size :L x W x H :7010mm x 5486mm x 3962mm.

Double Arc Swing: Area: 3 m X 1.5m. Safe Play Area: 4 m X 3.5m. Age: 4-12 Year. The arch shaped side frame of the swing is made up of 80 NB. GI Pipe and top pipe is made up of 50 NB GI pipe. Supporting top bar of the swing is fitted with special Design Nylon clamps assembly. It gives noiseless and smooth movement to the swing plastisol coated short link chain of 6 mm dia. Seat used is rubber with Nonskid surface with nylon lining pattern. Triangular hook is molded in belt in such a way that it would not project from the top surface of the belt Seats. All pipes are ‘B’ class pipes. All pipes are uniformly powder coated up to minimum 50–70-micron thickness to avoid corrosion.

Platform MGR: The area: 1.8 m dia. Safe play area: 2.8 m dia. Height: 1.0 m Rec. Age: 5 - 14 yrs. The platform of this merry - go - round consists of non-skid type FRP top of 8mm thickness. It is provided with handrails of 25mm GI pipes. The bearing used in this item is of dual heavy duty bearing lubricated with water sealant. All pipes are ‘B’ class pipes. All pipes are uniformly powder coated up to minimum 50–70-micron thickness to avoid corrosion.

TBSC-R.IV-05:Supply of Plastic Garbage bins Made out of high quality premium grade UV Stabilized Virgin Polyethylene material, with inside-out smooth finish and non-toxic in nature, having crisscross ribs provided at the bottom and vertical ribs provided at all four-corner side of the bins to prevent corner breakages during regular usage including lid with two side opening for easy garbage collection of the bins size 120 litre capacity with trolley wheels