REPAIRS TO STEEL FURNITURE INCLUDING PAINTING AT PMS UNDER GE (ARMY ) TRIVANDRUM

Amount

Almirah Large Steel (FD-1031 , FD-1033 and FD/E6/MAP/18)

S&F leg made of 1mm thick MS sheet as per drg and specification, including removing unserviceable leg from almirah large steel complete all as specified and directed.

S&F shelf made of 1mm thick MS sheet as per drg and specification, including removing unserviceable shelf from almirah large steel complete all as specified and directed.

S&F 3 way locking device as per existing pattern of drg and specification, including removing unserviceable 3 way locking device from almirah large steel complete all as specified and directed.

S&F new cleats as per drg and specification, including removing unserviceable cleats from almirah large steel complete all as specified and directed.

S&F new locks of approved make as per drg and specification, including removing unserviceable locks from almirah large steel complete all as specified and directed.

S&F new CP handle and appropriate bush as per drg and specification, including removing unserviceable CP handle from almirah large steel complete all as specified and directed.

M&L for preparation of inner and outer surface of Almirah large steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Almirah Medium steel (FD-1032)

S&F leg made of 1mm thick MS sheet as per drg and specification, including removing unserviceable leg from almirah medium steel complete all as specified and directed.

S&F shelf made of 1mm thick MS sheet as per drg and specification, including removing unserviceable shelf from almirah medium steel complete all as specified and directed.

S&F 3 way locking device as per existing pattern of drg and specification, including removing unserviceable 3 way locking device from almirah medium steel complete all as specified and directed.

S&F new locks of approved make as per drg and specification, including removing unserviceable locks from almirah medium steel complete all as specified and directed.

S&F new CP handle and appropriate bush as per drg and specification, including removing unserviceable CP handle from almirah medium steel complete all as specified and directed.

M&L for preparation of inner and outer surface of Almirah med steel and filling welded joint gap with putty, removing minor bends & dents and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Locker Bedside Steel (FD-1029)

S&F leg made of 1mm thick MS sheet as per drg and specification, including removing unserviceable leg from locker bed side steel complete all as specified and directed.

S&F new CP hanging rod 18mm as per drg and specification, including removing unserviceable hanging rod complete all as specified and directed.

S&F new 100mm size hasp and staple of best quality be fixed with appropriate nut and bolt as per drg and specification, including removing unserviceable hasp and staple complete all as specified and directed.

S&F new 100mm size CP handle of best quality be fixed with appropriate screw as per drg and specification, including removing unserviceable handle complete all as specified and directed.

M&L for preparation of interior and exterior surfaces of locker bed side steel and filling with metal putty and denting and applying one coat of synthetic enamel paint Olive Green colour complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Bed hard 6'x3' with hard top FD/E6/MAP/08(R)

S&F new plywood 12mm thickness commercial BWR with appropriate nut and bolt as per existing and new rubber shoes of best quality as approved, rest all as per drg and specification and apply one coat of paint black synthetic enamel, including removing unserviceable plywood from bed hard 6'x3' complete all as specified and directed.

Charpoy GI Pipe 32mm with plywood top (FD-220)

S&F MS flat iron 40mmx3mm each 2 Nos welded as per existing pattern and new plywood as per drg 12mm thickness BWR of approved make with appropriate 6mm screw headless as directed by Engineer-in-charge, including removing unserviceable plywood and MS flat iron from charpoy GI pipe and tightening the frame complete all as specified and directed.

S&F new long rail as per drg and specification, including removing unserviceable long rail from charpoy GI 32mm bore complete all as specified and directed.

M&L for removing unserviceable short rail and to make short rail from unserviceable long rail removed from existing charpoy and fix as per drg and specification complete all as specified and directed.

M&L for removing unserviceable leg and to make leg from unserviceable short rail removed from existing charpoy and fix arrangement for mosquito frame holder as per drg and specification complete all as specified and directed.

S&F new elbow 32mm of approved make as per drg and specification, including removing unserviceable elbow from charpoy GI complete all as specified and directed.

S&F new check nut 8mm as per drg and specification, including removing unserviceable check nut from charpoy GI complete all as specified and directed.

Charpoy T/S for OR with ply top (CECZ-FD 77/ FD/E6/MAP-II/01)

S&F new plywood 12mm thickness commercial BWR with appropriate nut and bolt as per drg and specification, including removing unserviceable plywood from Charpoy T/S for ORS complete all as specified and directed.

M&L for clean the surfaces and apply one coat of synthetic enamel paint black complete all as specified and directed.

S&F rubber shoes of superior quality complete all as specified and directed.

Charpoy folding with hard top FD-381(R)

S&F new plywood commercial 12mm thickness with appropriate nut and bolt as per existing and new rubber shoes of best quality as approved, rest all as per drg and specification and apply one coat of paint synthetic enamel, including removing the unserviceable plywood and clean the surfaces complete all as specified and directed.

Chair CB steel with arms (FD-75M)

M&L for removing unserviceable seat and back from chair CBA steel with arms and clean the surface and apply one coat synthetic enamel paint Olive Green as per drg and specification complete all as specified and directed.

S&F seat with appropriate screw to chair CBA steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed.

S&F back with appropriate screw to chair CBA steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed.

S&F new arm rest as per drg and specification, including removing unserviceable arm rest complete all as specified and directed.

Chair CB steel without arms (FD-75M)

M&L for removing unserviceable seat and back from chair CBB steel without arms and clean the surface and apply one coat synthetic enamel paint Olive Green as per drg and specification complete all as specified and directed.

S&F seat with appropriate screw to chair CBB steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed.

S&F back with appropriate screw to chair CBB steel made out of 1st class teak wood and apply black synthetic enamel paint and woven with 2mm cane plastic with perimeter woven with 3mm cane as per drg and specification complete all as specified and directed.

Chair Verandah (FD-256 & FD-259)

M&L for apply one coat of synthetic enamel paint, white colour, with entire satisfaction and caning with 4mm wide cane of approved make in mate pattern and new rubber shoes of best quality as per drg and specification, including removing unserviceable cane from chair verandah and clean the surface with steel brush complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Table Office Officer Steel (FD-84/1003)

M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint Olive Green complete all as specified and directed.

S&F new top made out of 18mm thickness prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table office Offr steel complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Table Office Clerk Steel (FD-84/381/1004)

M&L for clean the surfaces, dents and bends and apply one coat of synthetic enamel paint Olive Green complete all as specified and directed.

S&F new top made out of 18mm thick prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table Clk steel complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Table 3'x3'x760mm Steel (FD-1009)

S&F new top made out of 18mm thickness prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table 3'x3' steel complete all as specified and directed.

M&L for preparation the surface and apply one coat of synthetic enamel paint Olive Green in entire satisfaction of Engr-in-charge complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Teapoy verandah (FD-255/383)

S&F new top made of prelaminated particle board 18/19mm thickness and 4mm teak wood beading with polishing around the top as per drg and specification and apply one coat of paint enamel white, including removing unserviceable top from Teapoy verandah complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Teapoy verandah (FD/E6/MAP/17)

S&F new top made of prelaminated particle board of size 750mm x 450mm with 18mm thickness and alongwith PVC edging with screws as per drg and specification and apply one coat of paint enamel black, including removing unserviceable top from Teapoy verandah complete all as specified and directed.

Chair school with hand board (FD/E6/MAP/05)

S&F new seat PVC of approved make and writing board 585mm (L) x 300mm (W) made out of prelaminated particle board 18/19mm thickness as per drg and specification and apply one coat of synthetic enamel paint, black, including removing unserviceable seat and writing board complete all as specified and directed.

Table dining for OR's (FD-165)

S&F new top made out of 18mm thickness prelaminated particle board beaded with 4mm thick teak wood beading and apply French polish as per drg and specification, including removing unserviceable top from table dining OR's complete all as specified and directed.

M&L for preparation the surface and apply one coat of synthetic enamel paint Olive Green in entire satisfaction of Engr-in-charge complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Rack six tier adjustable steel (FD-106(M))

M&L for preparation of interior and exterior surfaces of Rack adjustable steel and filling with metal putty wherever required and denting and applying one coat of synthetic enamel paint OG complete all as specified and directed.

Spot welding shall be done as required as directed by Engr-in-charge. (spot size not less than 10mm) complete all as specified and directed.

Trestle store room steel (FD-1043)

M&L for preparation of interior and exterior surfaces of Trestle store room steel and filling with metal putty wherever required and denting and applying one coat of synthetic enamel paint OG complete all as specified and directed.

Mahesh Traders (BID ID -3505884)

REENA INDUSTRIES (BID ID -3508468)