AS PER TENDER NOTICE

Amount

Earth work in excavation of foundation for building works including lead upto 30m.and lift 1.5m. And its disposal and back filling with proper completion of work.

Earth work in filling for making subbase for interlocking C.C. tiles including lead upto 230m.and lift 1.5m. And including cost of all m labour and T&P. required for proper completion of work.

P.C.C. in foundation in 1:3:6 mix with Stone ballast & coarse sand including compaction etc complete.

Brick work in 1:4 cement mortar with coarse sand including cost of all material, labour and T&P. required for proper completion of work.

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-Charge with in distance of 60 m.

Cement plaster in 1:4 cement mortar with coarse sand including cost of all material, Labour and T&P etc. complete.

Dismantling floors to be stone flagged or tiles floor including base concrete and including stacking of dismantled materials as directed by Engineer-in-Charge with in distance of 60 m.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1;4(1 cement; 4 coarse sand), joining with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete.

Providing and laying 1st quality Ceramic glazed Wall tiles of minimum thickness 5 mm conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1;3(1 cement; 3 coarse sand) and joining with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade excluding cost of all material but including cost of all labour, T&P etc. complete in all respect.

R.C.C work in 1:1.50:3 including cost all metarial & labour required for proper completion of work.

Providing and laying steel reinforcement with cutting, bending and binding including cost of steel and bindimg wire placing in proper position.

Centering and shuttering for R.C.C. work including rent of shuttering material, labour and T&P etc requried for proper completion work.

Wiring point for light with 1.5 Sq.mm PVC insulated single core aluminium cable in PVC conduit pipe concealed in the wall complete with 8 SWG G.I. earth continuity wire and piano type switch etc. complete in all-respect (complete rate).As per PWD Electrical schedule item No. 131A.

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq.mm PVC insulated single core aluminium cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWG G.I. earth continuity wire and piano type switch etc. complete in all-respect (complete rate).As per PWD Electrical schedule item No. 133A.

Wiring point for plug with 1.5 Sq.mm PVC insulated single core aluminium cable in heavy gauge PVC conduit concealed in the wall complete with 8 SWG G.I. earth continuity wire and piano type switch and socket etc. complete in all-respect (complete rate).As per PWD Electrical schedule item No. 134A.

Wiring point for power plug/ H-P.M.V./ Sodium Vapour lamp with 2.5 Sq.mm PVC insulated single core aluminium cable in heavy gauge PVC conduit concealed in the wall complete with 8 SWG G.I. earth continuity wire with 15A piano type switch etc. complete in all-respect (complete rate).As per PWD Electrical schedule item No. 136A.

P/F concealed G.I. pipes class-B complete with fittings & clamps, including cutting and making good the surface of walls etc. complete (Internal Works) 20 mm dia bathroom.

P/F G.I. pipes class-B complete with fittings & refilling etc. complete (External Works) 32 mm dia.

P/F in position best India make proper copper alloy gate valve and check valve (Class-I) IS-778-1980 with iron wheel head etc. complete.20 mm dia.

P/F in position best India make proper copper alloy gate valve and check valve (Class-I) IS-778-1980 with iron wheel head etc. complete.32 mm dia.

P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour, T&P etc.15 mm dia.

P/F chromium plated bib cock, complete with all materials.15 mm dia.

P/F 15 mm nominal hole size CP brass pillar each cocks.15 mm dia.

Fixing 15 mm PVC connection, heavy quality with brass Union including supply of all materials, labour, T&P etc. required for peoper completion of the work.30 cm. Length.

P/F in position C.P.brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete. 600x20 mm.

Fixing C.P.brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleves with C.P. brass screws.

P/F C.P. brass toilet paper holders including cost of all material, labour, T&P etc..

P/F C.P. Jali for Nahani Trap 100 mm dia,including cost of all material, labour, T&P etc..

P/F C.P. brass waste pipe for sink and wash basin 32 mm dia,complete cost of all material, labour, T&P etc..

P/F European type white glazed earthen wareW.C. Pan (Indian make) of approved 1st quality ISI marked Bakelite seat cover & lid with C.P. brass hinges and rupper buffers.

P/F 100 mm size P or S trap for water closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1cement : fine sand).

P/F 10 Lit. low level P.V.C. cistern of standard approved make complete with all accessories and fittings.

P/F wash basin with single hole/number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole & making good the same but excluding fittings. 630x450 mm.

P/F chromium plated shower rose with 15 mm as 20 mm intel complete and 100 mm dia.

P/F mirror of following size of approved make with teak wood mouled frame and 6 mm thick hardboard backing including cost of all material, labour, T&P etc. 1200x450 mm.

Providing and laying 80mm. thick I-Shaped mechanicaly compressed interlocking cement concrete pavers block manufactured by high pressure and contolled vibration machine having minimum 5mm. thick topping cp cememnt mixed 20% marble powder the compressive strength of concrete paver blocks shall not be less than 30MPa. & 4.5 Kg/No. n ISI marked and as per drawing and confirming IRC-SP-63-2004 including cost of all material, labour, T&P. etc. required for proper completion of work.

Painting on interior wall in Two coat on over wall putty including all material, labour, T&P etc.

Painting on exterior wall with exterior Emulsion 1st quality (Nerolac & Asian) in Two coat on over wall putty including all material, labour, T&P etc.

Enamel Painting in Two coat with one coat primer including all material, labour, T&P etc.

Supply and Fixing Salwood wrought framed and fixed including simple moulding straight work as in Chaukhat frame including supply of materials, Labour,T&P etc. required for completion of work.

P/F panelled or panelled and glazed shutters for doors, windows and clerestory window fixing with butt hinges of size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge .Second class teak wood 35 mm thick shutters.

Providing and fixing wire gauge shutters using stainless steel wire gauge (Grade-304) aperture 1.4 mm and 0.50 mm dia. Wire, for doors, window and clerastory window, 35 mm thick shutters of required size UP teak wood, second class teak wood.

Providing and Laying polished granite stone flooring in required design and patterns, in linear as curvilinear portions of the building all complete as per architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

P/F Wall Urinal FB 46x35 Pastel of approved 1st quality ISI marked complete including all material, labour, T&P etc.

Providing and Fixing Bollard Light in I.H including all Material, Labour and T&P etc.required for proper completion of work.

M/S ADITYA CONSTRUCTION COMPANY

m/s mohd. zamil