PROVN OF CERTAIN SANCTIONED WORKS AND SPECIAL REPAIR AT RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc. or for shafts wells, cesspits, manholes etc. n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Spreading and levelling in layers n exc 25cm thick, well ramming including as required complete all as specified and directed.

Material & Labour for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material & Labour for 25 mm thick cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring , finishing the surface even and rough to receive the topping layer complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Material & Labour 350x250x7mm / 450x350x7mm thick glazed ceramic tiles coloured, design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

Demolition of brick work or stone masonry precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Material & Labour for 40mm thick damp proof course to horizontal or vertical surfaces inclding necessary form work in cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate complete all as specified and directed.

Material & Labour for applying evenly a coat of blown type bitumen @1.50 kg / Sqm and blinding with clean dry sand @ 0.05 Cum/ Sqm complete all as specified and directed.

Material & Labour for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg /Sqm complete all as specified and directed.

Material & Labour for 20mm thick bearing plaster in CM 1:4 on brick work surfaces, including laying bearing paper complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Filleting in any position and to any shape in cement mortar 1:3 incloding all mitres, stops, etc section of fillet not exc 25 sqcm complete all as specified.

Material & Labour for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

Material & Labour for 10 mm thick rendering in CM 1:4 on concrete surfaces as on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on roof surfaces using WPC where ever required as per manufacturerer's instructions or 3% by weight of cement which ever is more and finishing the surface even and smooth (without using extra cement) etc. complete all as specified NOTE -WPC shall be measured and paid separetely.

Material & Labour preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material & Labour preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

Supply & Fixing of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified & directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1 of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

Supply & Fixing steel window for industrial building, fixed type, with glazing bars complete all as specified and directed.

Supply & Fixing 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

Supply & Fixing 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin , anodised , type B-21 complete all as specified and directed.

Supply & Fixing150mm long Aluminium tower anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Supply & Fixing mild steel framed work such as grill , grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, welded wire mesh and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Material & Labour for reinforced cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate)., as in Slab supported on walls,beams ,roof, landing, balconies,complete all as specified.

Material and labour reinforced cement concrete 1:2:4 Type B1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified

Material & labour mild steel reinforcement TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Material & labour mild steel reinforcement TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All per item No 41 herein bebore but 5mm dia and over upto and including 10mm dia in strrups, spacers and binders

Use and waste of Formwork to soffits of suspended stab such as roof slabs, floor slabs, landings and similar work, not exc. 200mm thick (Horizontal or stoping) Rough finished surface of concrete flat complete all as specified.

Use and waste of formwork to to edges of concrete flats, treads breaks in floors, window cills, concrete railing, openings in concrete walls, floor and sides of RCC/ PCC bands in walls, horizontal or sloping and similar works exc 5cm but n exc 10cm for rough finished surface of concrete complete all as specified and directed.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing bib tap 15mm dia cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified .

Supply & Fixing pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed

Supply and fixing Gun metal, globe or gate valves marked , with iron wheel head, screwed both ends, for iron pipe bore dia of pipe 15 mm complete all as specified and directed.

Supply and fixing Gun metal, globe or gate valves marked , with iron wheel head, screwed both ends, for iron pipe bore dia of pipe 20 mm complete all as specified and directed.

Supply and fixing Angle cock 15 mm dia cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified .

Supply and fixing 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms). complete all as specified .

Supply & Fixing vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete all as specified and directed.

Supply & Fixing 10 ltr capacity PVC valve less, Symphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection complete all as specified.

Supply only Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

Supply & fixing coloured rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing in repairs, 580x450mm vitreous China, wash hand basin , oval type white excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste CP coupling complete all as specified and directed.

Supply and fixing Brass chromium plated tubular towel rail 20mm dia, D type , 60cm long complete all as specified.

Supply and fixing Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) including providing fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar etc complete all as specified.

Taking down cast iron pipe of any radius including bend , heads, shoes bend , swan neck etc complete all as specified and directed.

Supply & Fixing 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified & directed.

Supply & Fixing 75 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified & directed.

Supply & Fixing 75 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to wall with and including MS clamps complete all as specified & directed.

Supply & Fixing PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore, fixed in repairs complete all as specified and as directed

Supply & Fixing in repairs 100 mm dia cast iron bend (any radius)diminishing pieces or tapers with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs 75 mm dia cast iron bend (any radius)diminishing pieces or tapers with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs CI branch pieces, single (equal or unequal) ordinary or inverted(Spigot or socket tyes) or with parellel branches, 100 mm bore fitted with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Material & Labour 100 mm CI Sanitary short connection pipe of length upto 300 mm complete fixed in repairs all as specified and directed.

Supply and fixing cast iron ) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4) , diameter of outlet 75mm complete all as specified.

Demolition and bracking up existing drain pipes 150 mm bore (SWG/AC/RCC) set in cement mortar and includding cement mortar bedding hunching etc and removing from site to a distance not exc 50 mtr complete all as specified.

Material & Labour Salt Glazed stone ware Grade 'A' drain pipes laid in trenches, jointed and tested, 150mm internal dia of pipe complete all as specified

Material & labour for cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Material & labour for cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, concrete bed laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid and tested all as specified (SGSW pipes shall be measured and paid separately)

Material and Labour Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

Material & Labour for cutting into holes into or through brick wall built in cement mortar ( manhole/septic tank) superficial area exc 400sq.cm but nexc 0.10sq.m for connecting to existing manholes etc and making good in cement mortar 1:3 complete all as specified and directed.

Construction of brick masonry Soakage well excavation in hard/dense soil , foundation in PCC 1:3:6 type C-2 walls of honey combed and solid brick work in CM ( 1:4) , RCC cover slab Type A-1 ( 1:1.5: 3 ( using 20 mm graded stone aggregate) duly reinforced with 8 mm TMT bar @ 120 mm C/C , filling with brick bats, complete of size 1.20 m internal dia,3.0m effective depth complete all as specified and directed and shown on drawing No TD-309 sheet 1/4 to 4/4 complete all as specified and directed.

Construction of brick masonry Soakage wells excavation in hard/dense soil , foundation in PCC 1:3:6 type C-2 walls of honey combed and solid brick work in CM ( 1:4) , RCC cover slab Type A-1 ( 1:1.5: 3 ( using 20 mm graded stone aggregate) duly reinforced with 8 mm TMT bar @ 120 mm C/C , filling with brick bats, complete of size 2.4 m internal dia, 6.0m effective depth complete all as specified and directed and shown on drawing No TD-309 sheet 1/4 to 4/4 complete all as specified and directed.

Material andlabour for construction of Septic tank excavation in hard/dense soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all round / fibre reinforced cover with angle iron frame, vent shaft and sludge chamber etc complete 25 users as per drawing no TD-217, sheet 17 to 7/7 of HQ CEBZ Bareilly complete all as specified and directed.

E/M WORKS Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No 80 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 80 here in before but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and fixing of switch piano flush type single pole one-way 5 Ampere complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one-way 15 Ampere complete all as specified and directed.

Supply and fixing of socket outlet 5 Amp, 2 and 3 pins (Total 05 pins), flush type complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, complete all as specified and directed.

Supply and fixing of ceiling rose, PVC / polycarbonate isolated body complete all as specified and directed.

Supply and fixing of lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply and fixing of MCB single pole, 240 volts, 6 to 32 Amp, rupturing capacity 10 KA, ‘B’ curve type i complete all as specified and directed.

Supply and fixing of MCB single pole & neutral , 240 volts, 32 Amp, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 Amp rated bus bar, 240 volts fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 Amp rated bus bar, 240 volts fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing LED bulb 9 watt complete all as specified and directed.

Material and Labour for insulation deteriorated PVC insulated twin core flate 10 Sqmm, 1100 Volts grade heavy duty stranded aluminium, conductor cable in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI wire including taking down complete all as specified and as directed.

Supply and fixing High quility LED lighting fixture with co extruded polycarbonate body,complete with polycarbonate/glass tube, 5 Watt, suitable for mirror light internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fix in repair High quility LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate/Glass Tube T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable for all as specified & directed. Make :- C&S, Cat part No LTDC1220WLED/WD or any equivalent cat part in make specified in particular specification.

Supply & fixing Metal Exhaust fan ISI mark, AC single phase 230/ 240 V, 300 mm sweep, 900 RPM with louvers complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

Supply & fixing, connecting up, testing and commissioning Building Security light luminaires of with 30 W LED lamp suitable for 220-230V,50 Hz, protection class IP 65 with standard fittings/accessories (as applicable to the fitting) and also including provision for fixing by bracket made of 40mm bore light grade GI pipe (or higher size to suit the opening of fitting) 1.5 metre long bent to shape and 40 x 6 mm thick FI clamps, nuts and bolts and connecting up from ceiling rose by means of 3 runs of 1.5 Sq.mm PVC insulated but unsheathed, weather proof, IS-694 marked multistranded copper conductor cable fixed complete all as specified and directed .

NK CONSTRUCTION

MANISH SINGH KUWARBI