Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC | L1 | Accepted-AOC AOC ACCEPTED | |
| 2 | L2₹22.0 L+₹27,292 (1.26%)Rejected-AOC | L2 | Rejected-AOC AOC NOT ACCEPTED | |
| 3 | L3₹23.3 L+₹1.5 L (7.12%)Rejected-AOC | L3 | Rejected-AOC AOC NOT ACCEPTED | |
| 4 | L4₹24.0 L+₹2.3 L (10.4%)Rejected-AOC | L4 | Rejected-AOC AOC NOT ACCEPTED | |
| 5 | L5₹24.4 L+₹2.6 L (12.2%)Rejected-AOC | L5 | Rejected-AOC AOC NOT ACCEPTED |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RAMGARH CANTT
GE RAMGARH CANTT, JHARKHAND, PIN 829122
REPAIRS REPLACEMENT OF JOINERY AND CONNECTED ITEMS AT PRC MES ASC DAD and TEMPLE LANE LEKHA NAGAR AT RAMGARH CANTT
2022_MES_541326_1
8300/3112/E8
Open Tender
Civil Works
Item Rate
270 days
GE RAMGARH
Class E Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE RAMGARH CANTT
₹40,000
Yes
27 Sept 2022
28 Jul 2022
5 Sept 2022
28 Jul 2022
2 Sept 2022
20 Aug 2022
60 days
Amount
Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .
All as per item No. 1, here-in-before but exc but n.exc 1.00 Sqm each but n.exc. 4 Sqm,
Taking shutters of any description n.exc 1.00 Sqm each, complete all as specified and directed by Engr-In-Charge .
All as per item No. 3, here-in-before but exc but n.exc 1.00 Sqm each but n.exc. 2 Sqm,
Refixing of shutter of any description exc. 1 Sqm and n.exc 2 Sqm, in the same opening, complete all as directed.
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.
M & L Chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered , put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge
M & L for hold fast; wall ties; hooks for hanging fans; plan angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165, complete all as directed.
M & L PCC 1:3:6, type C-1 (using 20mm graded aggregate) for bed block for fillings for hold fasts etc., complete all as specified and as directed.
M & L for 35mm thick plain framed, panelled shuuter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003 (Part-1), complete all as specified and as directed.
S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side either decorative face veneer both face with lipping/frame, complete all as per specified and directed.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. fitted to chowkhats for doors etc., complete size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. fitted to chowkhats for windows, ventilators etc. complete size of the members of shutter as specified in clause No. 8.24 (b) of MES schedule 2009, part – I (Specifications) as in window shutters complete all as specified and directed.
S & F in repair block boards 18/19 mm thick grade 2 quality, commercial type for cupboard, shutter, shelf etc., fitted with screws, complete all as specified and as directed.
M & L 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination fixed in aluminium shutter/partition, complete all as specified and directed by Engr-In-Charge .
M & L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination other side balancing white lamination fixed with screw to timber frame work complete all as specified and directed by Engr-In-Charge .
S & F for Steel window with side hung shutter including box type hinge with steel handle, and steel peg stay complete with glazing bars dovetailed or welded, 3mm, complete all as specified and directed.
S & F for Steel window with side hung shutter including box type hinge with steel handle, and steel peg stay complete without glazing bars dovetailed or welded, 3mm, complete all as specified and directed.
S & F steel window, ventilators, fixed type with glazing bars, complete all as specified and as directed.
S & F framed work as in doors or gates of angle or other section with gusset plates complete doors etc., to be prepared to hanging or sliding with and including eitther hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and as directed.
S & F 1.00mm thick mild steel plain black sheet in covering to door chowkhat (frames) cut to size beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed by Engr-In-Charge .
S & F framed work such as grill grating etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors and similar works conforming to Fe-410-0 or Fe 310-0 including all necessary welding complete all as specified and directed by Engr-In-Charge.
S & F galvanised wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples on wooden fillets and beads, complete all as specified and directed by Engr-In-Charge .
S & F in repair galvanised wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples on wooden fillets and beads, complete all as specified and directed by Engr-In-Charge .
Hacking out old broken glass ( any thickness ,size quality or description) from old wooden frames/steel frames , glazing with oil putty or fixed with beads, complete all as specified and as directed.
M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
M & L for 3mm thick frosted plain sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fix 125mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.
S & F anodised aluminium handles 125 mm long, extruded section and fixed, complete all as specified and directed by Engr-In-Charge.
S & F 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .
S & F 75 mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge.
S & F 100mm hasp and staple safety type aluminium anodised wire type, including bolt to hinge plate and fixed with screw, compelte all as specified and as directed.
S & F second class hard wood small items such as brackets n.exc 200mm, latch and hinge blocks, shaped door and window stops and the like inclduing all necessary labours articles n exc 200 cu cm each complete all as specified and directed by Engr-In-Charge .
S & F mild steel sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .
S & F in repair MS ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete, complete all as specified and directed by Engineer -In-Charge.
M & L painting on new wooden based surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
M & L painting on new steel surfaces of any description not otherwise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified by Engr-in-Charge
S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S & F anodised aluminium window and ventilators shutters, partition fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazzing clips, roller, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified by Engr-in-Charge.
S & F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty for aluminium door complete all as specified and directed by Engineer -In-Charge.
S & F cast brass fanlight pivot with plate size 25mm x 65 mm and suitable for shutter of 35 mm thick, complete all as specified and as directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples, complete all as specified and directed by Engr-In-Charge .
M & L 9 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with aluminium frame work, complete all as specified and directed by Engr-In-Charge .
M & L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty exc 0.50 Sqm in each pane fixed to aluminium frame work, complete all as specified and as directed by Engr-In-Charge .
M & L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane fixed to aluminium frame work, complete all as specified and as directed by Engr-In-Charge .
S & F 4 lever mortice lock vertical type size 65 mm long, complete all as specified and as directed.
S & F piano hinges mild steel bright finish 30mm flap, complete all as specified and directed.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -In-Charge.
S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty for aluminium door complete all as specified and directed by Engineer -In-Charge.
Supply only wooden beads of size 10x10 mm to 15x15 mm of teak wood square/triangular in cross section, plain or designer for fixing PVC mosquito net jali, complete all as specified and as directed.
Taking down aluminium door shutters only (area exc 1.0 Sqm but n.exc 2.0 Sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads and cleats of existing make and also refixing the handles and mortices locks in existing position with and including new screws including refixing the door shutters in same opening, complete all as specified and as directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
M & L brick work with sub class B old size bricks straight on curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge .
All as per item No. 57 here-in-before but except bricks.
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and fair without using extra cement, on wall complete all as specified and as directed
M & L applying three coat of white washing including preparing of new plastered wall surfaces, complete all as specified and as directed.
M & L for preparation of new plastered surfaces and applying two coats of 'Birla White wall care putty' or 'JK Wall Care putty' to make the entire surface free from undulations, complete all as specified and as directed.
M & L for preparing new putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on wall surfaces, complete all as specified and as directed.
S & F PVC coated, curtain rod 20 mm dia fancy type with fixing bracket etc., complete all as spefied and as directed.
S & F fancy type sofia bracket for curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and as directed.
S & F in repair Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete in ground floor paving n.exc 15 cm thick (below or above ground level) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.
M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.
M & L for non skid ceramic tiles, of size 300x300x7 mm thick, as in floor etc., set and jointed in neat cement slurry @ 3 Kg per square metre and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M & L for glazed ceramic tiles coloured of size 300 mm x 200mm x 6mm thick, as in dado/skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and as directed.
M & L glazed ceramic coloured tiles of size 375 X 250 X 7mm / 450x300x7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick cement plaster in CM (1:3), complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in skirting, dado, etc., over and including 15mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L for 9-10 mm thick light colored vitrified ceramic tiles of size as in floor, n.exc 0.36 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.
M & L for 9-10 mm thick light colored vitrified ceramic tiles of size as in skirting , n.exc 0.36 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar (1:3), complete all as specified and as directed.
Taking down old steel window projecting type by mechanical cutter and fixed in the same opening by providing box type hinges 02 Nos in each shutter n.exc 1.00 Sqm and making good and painting to disturbed surface, complete all as specified and directed by Engr-In-Charge .
Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm, complete all as directed.
M & L 19 mm thick medium density fibre (MDF) membrane kitchen cabinets door shutter in wood grain colour, half round edge fixed, complete all as specified and as directed.
S & F ball catches with 8mm dia steel ball, and brass body and striking plate, including letter in and fixed, complete all as specified and directed.
S & F auto close hinges, stainless steel, bright finished or electrogalvanised, complete fixed as specified and directed.
S & F brass handle of 100 mm size type polished bright, complete fixed as specified and directed.
Modernage Constructions Pvt. Ltd.
M/s friend enterprises
M/S Popatlal A. Rathod
upadhyay engineers and consultant
Paras Nath Singh
ganpati enterprises
M/s Ray construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .