Widening and Strengthening of C.H To Modpar Bilaya Bagathala Road (ODR) Km.0/000 to 9/900 Ta.Morbi , Dist.; Morbi (Under MMGSY-SCSP-2025-26)

Name of work :- Widening & Strengthening of C.H To Modpar Bilaya Bagathala Road (ODR)

Km.0/000 to 9/900 Ta.Morbi , Dist.; Morbi (Under MMGSY-SCSP-2025-26)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 3.84 One 28455.09

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 28585.10 One 323.60

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Box cutting the road surface to proper slope 14452.00 One 109.24

and camber for making a base for road work Cum

including removing the excavated stuff and

depositing on the road side slopes as

directed upto all lead.

4 Earthwork in cutting in all sorts of soil and 5727.00 One 134.47

soft Murrum including conveying and Cum

spreading the suff embankment as and

where directed within 200 meters from the

end of the cutting with all required lead and

5 Supplying, stacking, spreading, rolling, 1423.00 One 780.62

watering and consolidation to desired Cum

density of quarry spall with all lead and lift.

6 Scarifying graveled macadam or Bitumen 11856.00 One 41.60

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

7 Granular Sub-base with Black trap crushed 9400.00 One 1071.40

stone well Graded Material (Table.400.1) by Cum

Mix in place Method. Construction of

Granular Sub-base by Providing Black Trap

cruhsed stone well greded material,

spreading in uniform layers with motor

graded on prepared surfce, mixing by mix in

place method with rotavator at OMC, and

compacting with Vibratory roller to achieve

the desired density, complete as per

Technical Specification Clause-401. For

Grading-1 Materials.

8 WBM Grading-1 4122.40 One 1521.06

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

1 as per Technical Specification Clasue.405

By menual means.

9 WBM Grading-2 4479.40 One 1402.48

Providing, laying, spreading and compacting Cum

stone agg. Of 63mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

2 as per Technical Specification Clasue.405

By menual means.

10 Rolling and Watering of earthwork with 36973.60 One 22.95

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

11 Providing, laying & rolling 60mm thick 6007.00 One 3351.28

compacted DBM-Dense Bitumeneous MT

Macadam with B.T. aggregates at the rate of

0.66Cum/MT as per MOST gradation using

emulsion RS-1 for tack coat at the rate of

Kg / 10 sqm on WBM using bitumen VG-30

for mixing with aggregate at the rate of

4.50% i.e. 45 Kg / MT of total mix, including

heating and mixing in Drum mix plant and

spreading the same by Paver finisher and

consolidation with Vibratory roller including

necessary including cost of Hire charges,

firewood, oil, Lubricants, labour charges, etc.

by using contractor's own drum mix plant,

machineries and equipment, tools etc.

complete in accordance with the requirement

of specification. Grading-Il material

12 Providing, laying and rolling of 30mm thick 3140.00 One 3662.86

compacted bitumeneous concrete With B.T. MT

aggregate as per MORTH specifications and

using bitumen grade VG-30 for mixing at the

rate of 55 kg/MT ie 5.50% of total mix

including heating the asphalt and aggregate

by contineous batching hot mix plant,

transporting the mix and spreading the same

by paver finisher and consolidation with

vibratory roller including providing all

materials, equipments, tools, plants,

firewood, oil, kerosene, Labour charges

etc.using contractor's own plant and

machineries Grading-Il material.

13 Excavation for foundation upto 1.5m depth 617.80 One 253.88

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (B) Dense or hard soil.

14 Excavation for foundation upto 1.5m depth 433.40 One 432.61

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (C) Hard Murrum

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

15 Excavation of foundation in Sand graval caly 889.20 One 511.11

soft soil and murrum etc. including shoring, Cum

struting dewatering as necessary and

disposing of the excavated stuff as directed.

Depth upto 3.00mt.

16 Excavation of foundation in hard murrum 477.40 One 611.32

and boulders and very stiff or sticky clays Cum

and other similar strata including shorting

out and struting and dewatering as

necessary and disposing of the excavated

stuff as directed.

17 Providing and laying rubble for apron (Each 146.20 One 1083.81

stone weighting not less than 40kg) Cum

including and packing and filling in the

interstices with quarry spall.

18 Providing and filling in foundation with 176.20 One 3715.62

ordinary cement concrete M-150 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

19 Providing and casting in situ ordinary 1329.90 One 3921.63

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

20 Providing and filling in foundation with 138.40 One 3345.58

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

21 Providing parapet of ordinary cement 85.00 One 1082.18

concrete M-200 as per detailed drawing with Rmt.

necessary reqinforcement including

shuttering laying vibrating and finishing to

line and level complete (ii) cast in situ.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

22 Dry Lean Cement Concrete Sub base 1137.00 One 2687.40

(Construction of dry lean cement concrete Cum

Sub- base over a prepared sub-grade with

coarse and fine aggregate conforming to IS:

383, the size of coarse aggregate not

exceeding 25 mm, aggregate cement ratio not

to exceed 15:1, aggregate gradation after

blending to be as per table 600-1, cement

content not to be less than 220 kg/cum,

optimum moisture content to be determined

during trial length construction, concrete

strength not to be less than 10 Mpa at 7 days,

mixed in a batching plant, transported to

site, laid with a paver with electronic sensor,

compacting with 8-10 tonnes vibratory roller,

finishing and curing.

23 Cement Concrete Pavement M-30 2274.00 One 7009.29

(Construction of un- reinforced, dowel Cum

jointed, plain cement concrete pavement

over a prepared sub base with 53 grade

cement @ 410 kg per cum, coarse and fine

aggregate conforming to IS 383, maximum

size of coarse aggregate not exceeding

mm, mixed in a batching and mixing plant

as per approved mix design, transported to

site, laid with a fixed form or slip form

paver, spread, compacted and finished in a

continuous operation including provision of

contraction, expansion, construction and

longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rod,

admixtures as approved,curing compund

finishing the lines and grade as per drwaing.

24 Providing and casting in situ Controlled 632.30 One 5198.58

cement concrete M-200 for R.C.C. work in Cum

Piers, abutment, returns and riding returs as

per drawing including centering, shuttering,

scafolding where neccesary laying, vibrating

curing and finishing complete (A) For all

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

25 Providing and casting in situ Controlled 186.00 One 4697.25

Cement Concrete M-250 for R.C.C. Raft and Cum

cut-off walls including neccesary shuttering

laying, vibrating ramming of curing

26 Providing and casting in situ Controlled 88.50 One 5256.06

cement concrete M 25 for R.C.C. Solid slab Cum

including centering, scaffolding, curing and

finishing complete.

27 Providing and casting in situ Contolled 321.20 One 5271.78

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

28 Providing and casting in situ Controlled 5.40 One 4842.86

cement concrete- M-20 mix for kerbs/Kerb Cum

blocks including formwork,curing and

finishing complete.

29 Providing and casting in situ Contolled 47.40 One 5235.67

cement concrete- M-25 mix for Approach Cum

slab including formwork, curing and

finishing complete.

30 Providing and laying weep hole in 527.00 One 86.69

Abutment and returns by using A.C pipe of No

100mm. Incl. fixing in proper grade and

jointing the complete as per detailed

31 Providing and laying filter media 600mm. 163.50 One 1239.35

thick directed at the back of abutments, Sqm

returns and wing walls as per detailed

specifications.

32 Providing and laying in Position FE - 10.310 One 73858.69

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

33 Providing and Fixing in position FE- 42.290 One 73243.01

500/500D TMT bar reinforcement including MT

cutting, bending, hooking, and tying

complete as per detailed drawaing (A)RCC

kerb (B) RCC Footpath (B) RCC Solid Slab/

App. Slab / Wearing coat.

34 Providing 12mm. Thick Pre-moulded asphalt 11.10 One 703.52

filler joints as per drawings Sqm

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

35 Providing G.I. 100mm. Diameter water 24.00 One 536.02

spouts including necessary iron gratings as No

36 Providing flood gauge marks on sub 18.00 One 167.03

structure as per design including painting Rmt.

37 Supplying and fixing reinforced concrete 75.00 One 3469.25

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 900mm Dia.

38 Supplying and fixing reinforced concrete 60.00 One 5560.00

heavy duty non presure pipes with collars Rmt.

for culverts carrying heavy traffic as per IS

458-1991 specification including setting and

joinng the pipes in C.M. 1:2 watering and

laying (to level or slope) of I.S. Class NP-3 of

following internal diameter with all lead and

lift. (i) 1200mm Dia.

39 Dismantling the existing structure including 266.90 One 409.22

removing and stacking the dismantled Cum

materials as and where directed.

Stone/Rubble masonary.

40 Dismantling the existing structure including 406.60 One 930.35

removing and stacking the dismantled Cum

materials as and where directed. RCC Work.

41 Dismantling G.I. Pipes G.S.W. Pipes and A.C 45.00 One 76.67

Rain water pipes with fitting and clamps Rmt.

including stacking the materials with all

lead and lift (for any of pipe)

42 Providing temporary all weather and fair 170.00 One 2809.41

weather diversion suitable for traffic during Rmt.

the construction period of the bridge / Slab

drain including providing necessary drains

and all safety measures including red lamps

/ signals at night for traffic etc. complete..

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

43 Providing and fixing Precast cement concrete 38.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

44 Providing and fixing Precast cement concrete 720.00 One 350.80

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

45 Providing and fixing ordinary Kilometer 8.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

46 Providing and fixing 5th Kilometer stone of 2.00 One 1935.14

pre-cast C.C. 1:2:4 including necessary No

reinforcement as per I.R.C. type design in

C..C. 1:4:8 including painting lettering etc.

47 Providing and fixing Indicator stone of 447.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

48 Providing and fixing Flood guage post mark 2.00 One 1140.29

of 'C' angle size 100mm x 50mm x 6mm thick No

(in head wall 0.500mt. And 1.50mt. Out side

with painting and lettering with redeum

color as directed.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

49 Village name Sign :-Providing and fixing sign boards 23.00 One 6397.43

made out of 2mm aluminium sheet / 4mm ACP No

(Aluminum composite Panel); size 90x60 cms.

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

3.3mtr long stand post of Iron Angle 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in

black and white bends. the details of symbol or

inscription / numerals for each board shall be as per

the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of

year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

50 Hazard Marker Sign :-Providing and fixing sign 26.00 One 3518.68

boards made out of 2.0 mm aluminium sheet / 4 mm No

ACP (Aluminum composite Panel); size 90x30 cms.

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

1.8mtr long stand post of Iron Angle 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer

& a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

51 Direction (Junction) Sign :-Providing and fixing sign 5.00 One 21287.50

boards made out of 2mm aluminium sheet / 4mm No

ACP (Aluminum composite Panel); size 244x122 cms.

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer

& a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

52 Sign board per Square Meter :-Providing and fixing 24.00 One 7894.01

sign boards made out of 2mm aluminium sheet / No

4mm ACP (Aluminum composite Panel); size 1 meter

x 1meter as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

mtr long stand post (2 Nos.) of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings

in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per

the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of

year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

53 Cautionary Warning Sign : Providing and fixing sign 2.00 One 3808.65

boards made out of 2mm Aluminium sheet size No

90x90x90 cms. Equilateral treangle as per the design

of IRC-67-1977 pre treated with phospheting process

and acid etching coated with one coat of apoxy

primer and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest

MOST specification 3.1 Mt. long stand post and frame

fabricated from suitable size iron angle of

35x35x3mm, 75x75x6mm. as required painted with

best quality epoxy coating in black and white bends

the details of symbole for each board shall be as per

the instruction of Engineer in charge the fixing at site

shall be in 1:2:4 CC block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineering Grade.

54 Citizen's information Board. Providing and fixing of 1.00 One 7393.20

typical MMGSY information board as per instruction. No

Two MS sheets of 3 mm thick, of 900 mm x 750mm

size fixed at top & bottom duly rivetted with MS

angles of 25 x 25 x 5 mm thick M.S angle shall be

welded by two vertical M.S angle of 5 mm thick to

mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of

600mm x 600mm x 750mm, below ground level. The

letters & figure of any shade reflectorised with High

Intensity Prismatic Grade Retro Reflective Sheeting of

Type-4 as per ASTM D-4956 and latest MORD

specifications; All sections of framed posts and steel

tube will be painted with primer and two coats of

epoxy paints as per drawing Clause 1701 and

Annexure 1700.1 (10.16). (A) Class-B High intensity

Grade Retro Reflective sheeting.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

55 Road Marking with Hot Applied paints with 3921.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria

for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

56 Cate eye / road stud/ RPM : Supplying 3000.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

57 Providing and erecting a "W" metal crash 144.00 One 3723.46

barrier comprising of 3mm thick currugated Rmt.

sheet metal beam rail, 70cm above

Road/Ground level, fixed on ISMC series

channel vertical post, 150x75x5mm spaced

2m center to center, 1.8m high, 1.1m below

ground/road level, all steel parts and

fitments to be galavanized by hot dip

process, all fittings to conform to IS:1367 and

IS:1364 metal beam rail to be fixed on the

vertical post with a spacer of channel section

150x75x5mm, 330mm long complete as per

Rupees Eleven Crore Twelve Lakh(s) Three Thousand Two And Paise Fourteen

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

NOTE: Amount Rs.424014/- Of Dismentalled materials shall be recovered from 1st R.A. bill of Contractor at once.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division