SPECIAL REPAIR TO BLDG No T-279 of No 2 DET WESTERN COMMAND IS GP AND PROVN OF TOILET BLOCK NEAR BLDG NO T-173 OF SUP PL ASC AT DHOLEWAL MIL COMPLEX UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L vitrified ceramic tiles (Ist quailty) 10mm thick (square/ rectangular) polished, area of each tile n. exc. 0.36 sqm laid in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

All as per serial item No.03 here-in-before but as in skirting over and including 10 mm thick rendering in cement mortar 1:4

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggr. Finished even and fair.

M&L for 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement.

Taking down chowkats or frames n.exc 1.5 Sqm.

Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame).

M&L for box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F for box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F for box type steel ventilator side/top hung with glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F for mild steel Framed work such as grills, gratings, etc framed guard bars , ladders railings , frame of water tanks etc confirming to fe 410 or fe 310.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or wire stapples.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane. Complete all as specified and directed.

S&F for sheet 4.0 mm thick frosted glass, squares exc 0.5 sq. m each pane.

M&L for two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation.

S&F for pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.

S&F for 2nd class 35mm thick hard wood plain, framed, panelled shutters (any number of panels) with panels of 9mm thick BWP commercial ply.

S&F for 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I.

S&F for mild steel 300mm helical door spring , ordinary rat tail rod patteren including roller and roller plate complete.

M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.

M&L for two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer inclding prepration of newly untreates surfaces.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F for 125mm aluminium handles, cast type, anodised.

S&F for second class hardwood small fittings as in shaped door/ window stops incl all necessary labours, articles n exc 200 cum each.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs, any thickness, incl. cover fillets.

Dismantling framed timber scantling 40 sq cm and over in section in any position (framed work).

S&F for GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F for 4mm thick E-board , multipurpiose, decorative type,for ceiling purpose.

Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering all as specified.

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

S&F for roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) all as specified.

M&L for two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation.

Demolition of brick work built in cement mortar complete all as specified.

M&L for brick work with sub class "B" bricks straight or curved on plan etc 6 m mean radius in CM 1:4 complete all as specified.

-ditto- but except bricks

M&L for brick work with sub class Old B brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement. Complete all as specified and directed.

M&L for 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finsihed the surfaces even and smooth without using extra cement. Complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying three coats of whitewash complete all as specified.

M&L for preparation of old plastered wall surfaces and applying two coats of whitewash complete all as specified.

M&L for two coats cement base paint including preparation of newly plastered surfaces.

M&L for one coats cement base paint including preparation of old plastered surfaces.

S&F in repair curtain rod made out of 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm complete all as specified and directed.

S&F for plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed.

S&F for mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.

M&L for chequerred cement concrete tiles 20 cmx20 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment , including 20mm thcik screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 Type B-2 using 40mm crushed stone aggregate as in sub base floor. Complete all as directed & specified by Engineer-in charge .

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

M&L for non skid joint free ceramic coloured tiles (Ist quailty) 7 to 8mm (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match over a 15mm thick screed of CM 1:4.

Dismantling of stone slabs and tiles of any description or thichness in floors aprons etc laid bedded and pointed in any mortar complete all as specified & directed by Engineer-in- charge.

M&L for granite slab 20 mm thick (table rubbed and polished) as in in steps, jambs,pillars, window-cill, cooking platform over and including 20mm thick bedding layer in cement mortar (1:4) in and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises.

M&L for glazed ceramic coloured tiles 450mm x 300mm x 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

S&F for vitreous china urinal,half stall type, white with grating union and discharge pipe including brackets.

S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S & F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed by Engineer-in-Charge.

S&F for bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule.

Taking down steel water tubes of size 15mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

S&F for 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F for 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.

S & F for fancy type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or cold with long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed in repair complete all as per specified.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm all as specified & directed by Engineer-in- charge.

S&F for 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs.

S&F for stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs.

S&F for 75mm bore CI branch pieces with oval access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

S&F for 75mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.

S&F for solid PVC door frame of sixe 50mmx47mm made out of 5mm wood grain printed PVC Sheet reinforced with MS square tube in opening as per specification and drawing.

S&F for factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading as per specification and drawing.

M&L for reinforced Cement Concrete type B1 1:1.5:3 (M20) (nominal mix ) (using 20 mm graded stone aggregate) in Beams, cantilevers, lintels etc.

M&L for reinforced Cement Concrete type B1 1:1.5:3 (M20) (nominal mix ) (using 20 mm graded stone aggregate) in Chajjas etc.

M&L, use and waste rough finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

M&L, use and waste rough finished Form work to edges of concrete floor and roofs and similar work exceeding 5 Cm but not exceeding 10 Cm wide.

S&F for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality.

Dismantling of wall and ceiling PVC boards of any thickness including cover fillets

Supply and fixing for 5mm thick PVC sheet of any pattern as in strips & channels feathered at edges for fixing to wall lining inclusive of solvent cement and fixing at site etc complete all as specified and as directed by Engineer-in- charge.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F for PVC connections 15mm size with PTMT nuts of lenth 450mm.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 Mtr in depth for foundation in soft/loose soil and getting out.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m high above the starting point complete all as specified & directed by Engineer-in-charge.

Returning filling in including, spreading, leveling watering and well ramming in layer not exc 25 cm all as specified & directed by Engineer-in-charge.

M & L PCC Type D2, 1:4:8, as in foundation filling and mass concrete.

M&L for bricks work with sub class B brick straight or covered on plain exc 6m means radious built in CM 1:4 all as specified & directed by Engineer-in-charge.

M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified & directed by Engineer-in-charge.

M&L for RCC 1:1.5:3 (nominal mix) (20mm graded aggregates) in plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L for RCC 1:1.5:3 (nominal mix) (20mm graded aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span as Specified.

M&L for RCC M-20 in Slabs supported on walls,beams and columns in 1:1.5:3 (nominal mix) floors,roofs, landings, balconies,canopies, deck slabs and in shelves.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work

Formwork to soffits of sus-pended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Hori-zontal or sloping) Complete all specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality con-forming.

M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality con-forming.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 mixed with integral water proofing compound with finishing cement concrete even and fair and applying 2 coats of cement based paint finishing including preparation of new plastered suraface. Note:-water proofing compound Measure and paid separatly.

M&L for rendering 12mm thick on other than fair faces of brick work in CM 1:6 with finishing cement concrete even and fair and applying two white wash on internal surfaces of walls incl preparation of newly plastered surface.

M&L for rendering 5mm thick in CM 1:3 to surfaces of ceiling and apllying 3 coats of white wash on ceiling including preparatin of new plastered surfaces.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete.

S&F for 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane all as specified and directed.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples.

S&F for butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long.

S&F for extruded aluminium alloy handles, fabricated type, anodised 125mm long

S&F for aluminium anodised, barrel tower bolts of extruded section 150mm long.

S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections ans fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, 200mm long complete all as specified and directed.

M&L for hardcore of broken stone boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100mm thick. PCC 1:4:8 type D2 under flooring ,using 40mm graded stone aggregates as in sub base complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:4) all as specified and directed.

M&L for glazed ceramic coloured tiles (300x450mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match such skriting /dado and risers to steps etc laid over and including bedding layer of 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and finished even and fair complete all as specified and directed.

S&F for vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe with Cistern, antisyphonage pipe, ,etc complete al as specified and directed.

S&F for plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

Supply and fix for health faucet (hand spray) chromium plated fancy type with 1 metre long PVC flexible pipe 15mm bore covered with chromium plated flexible tube connected to 15mm bore iron pipe incl holder for holding faucet fixed to wall with screws complete all as specified and directed.

S&F for vitreous china urinal, bowl type complete flat back size 465x35x265 mm white with grating union and discharge pipe including brackets .

S&F for vitreous china wash basin with vitreous China Pedastal, white, flat back, size 550 x 400mm, including brackets incl 32mm bore CP waste coupling.

S&F for soap dish fixed to walls with chromium plated brass screws.

S&F for brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange.

S & F for type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or cold with long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed complete all as per specified.

S & F for two way bib tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.

S & F for angle valve chromium plated cast copper alloy with, screwed down, high pressure with fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.

S&F for PVC connections 15mm size with PTMT nuts of lenth 450mm.

S&F for rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1.

S&F for 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.

S&F for 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.

S&F for 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F for 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F for 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed

S&F for 100mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.

S&F for 75mm bore CI branch pieces with oval access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 75mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.

S&F for 75mm bore cast iron cowls.

S&F for CI floor traps 75mm bore and jointing to waste pipe in cement concrete 1:2:4 type B-1

M&L for PCC type B1 (1 : 2 : 4) using 20mm graded stone aggregate as in Manhole coping including necessary form work complete all as specified and directed.

M&L for precast cement concrete 1:1.5:3 type A-1 using 20mm graded aggete as in cover slabs (for manholes etc.) including necessary form work and set in cement mortar 1:6 all as per specified and directed.

M&L for 10 mm dia and above Mild steel bars cut to length bent to shape reqd incl cranking,bending, hooking ends and with and incl mild steel wire (annealed) not less then 0.9mm dia or securing with clips.

M&L for Cement concrete type C2 (1 : 3 : 6) using 40mm graded stone aggregate as in concrete bed to SGSW/RCC drain pipe in any depth including packing under, and haunching against the sides of pipes after they are laid and tested all as specified.

S&F for Reinforced concrete pipes 150 mm bore , class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound and finished even and smooth without using extra cement complete. (Waterproofing compound measure and paid separately)

Supply of integral water proofing compound confirming to IS-2645.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

M&L for 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor.

M&L for 60 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.

M&L for Sand filling under interlocking tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

Sch 'A' sec-II

Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only ceiling fan and connecting up including provision sutiable of new down rod for ceiling fans,of cable from celling rose/ connector to fan incl painting all as specified and as directed.

M &L for point wiring with PVC insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including heavy duty PVC conduit ISI marked in concealed in walls, ceiling etc, for one light / fan / bell point controlled by one switch including replacing exisiting switch boards/boxes with new MS concealed terminal boxes with 3mm plastic laminated sheet top cover,earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly all as specified. :-

One light/fan point controlled by one, one way switch.

One switch socket outlet point 5 Amps on independent board.

One 3 Pin socket outlet , 5 Amps on the same board with other switch.

All as per item No. 156 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Supply and fix for LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F- not less then 0.95, surge protection upto- 4Kv, IP20, THD shell be less then 10%, CCT- (k0)- 6500ANSI, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

M & L for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed. Note: Three run wire shall be measured in one unit.

Supply and fix for TPN MCB DB 4 ways ,Double door with 415 Amps, Double door type complete all as specified and as directed .

Supply and fix for MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-10 kA complete all as specified and as directed .

Supply and fixing for factory made sheet metal enclosures SPN 8 way double door 240 v for DB,s suitable for having MCB flush with wall complete all as specified and directed.

Supply and fixing for MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.

Supply and fixing for MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed

Supply and fix for ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed.

Supply and Fix for switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.

Supply and Fix for socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.

Supply and Fix for switch Socket combenation 2 in 1 outlet 3 pin, 5 A flush type complete all as specified and as directed by Engr-in-charge

Supply and Fix for switch Socket combenation 2 in 1 outlet 3 pin, 16 A flush type complete all as specified and as directed.

S&F fan regulator , fulsh stapped type ,electronic ,450 watt complete all as specified and directed.

Supply and fix for LED garden light fittings 12W, 240V, 50Hz,rated input IP-66, P.F- not less then 0.95, incl with PCC (1:2:4) foundation higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient for complete all as specified and directed.

M &L for earthing incl earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified

Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed.

Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed . Note:- Thickness of sand cushioning shall be measured punned down 18cm.

M & L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

Taking down of any size of bldy security light fittings complete all as specified and directed.

Supply and fixing for bldg security light fitting LED 30 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. LED life -1 Lac burning hrs , fixture should with stand 320V upto 48 Hrs , auto cut off>320 V & restart ,440V sustain upto 8 Hrs, NABL acreddited LM 79 report, IP66 with high power LED lamp compete all as specified and directed.

Material and labour for point wiring with PVC insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including heavy duty PVC conduit ISI marked in concealed in walls, ceiling etc, for one light / fan / bell point controlled by one switch including replacing exisiting switch boards/boxes with new MS concealed terminal boxes with 3mm plastic laminated sheet top cover,earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly all as specified. :-

One light/fan point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board

One 3 Pin socket outlet , 5 Amps on the same board with other switch

M & L for point wiring with PVC (FRLS)unsheathed, fire resistance, stranded copper conductor of size 2.5 sqmm (nominal cross sectional area ) single core cable in and including rigid non metalic PVC conduit 20 mm dia or higher size "medium " grade ISI marked concealed (surface only on roof & colomns) complete with all accessories/fittings and MS box thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 2.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, for one three /six pin 15/16 amps power socket controlled by one 15/16 amps switch complete all as specified & directed.

Supply and fix for exhaust fan, heavy duty 300mm sweep with louvers, 1400 RPM and connecting up including provision of copper and flexible 3 core of size 0.5 sqmm and PVC connector block complete all as specified

Supply and fix for LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix for SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type all as specified.

S&F for MCB SPN 6- 32 Amps 240Volts, 10kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.

S&F for SP MCB 6-32 Amps 240Volts, 10 kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.

Supply and fix for ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and directed.

Supply and fixing for switch piano flush button single pole one way 5 amps,230 volts.complete all as specified and directed.

Supply and fixing for switch piano flush button single pole one way 15 amps,230 volts.complete all as specified and directed.

Supply and fixing for socket outlet 3 pin,5 Amp multipurpose flush type complete all as specified and directed

Supply and fixing for socket outlet 2 in 1,3 pin, 5 & 15 Amp flush type complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2.0 core Complete all as specified

Supply and fixing for bldg security light fitting LED energy saving & envoirmental friendly, long life versatile, pressure die cast aluminium IP66 with high power LED lamp 30 W LED 6000K compete all as specified and directed.

Excavation in trenches soft/ loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified

M & L for sand cushioning to UG cable with a layer of fine sand 8 Cms thick before laying of cable and 15 Cms thick after laying of cable in trenches complete all as specified

M & L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

M &L for cutting the exiting GI 40/25 mm dia taking branch connection 25mm dia including necessary GI fittings/Specials.

Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

Supply & fixing for galvanised iron tubes of size 20mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed.

Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 25mm dia complete all as specified & directed.