Kerala

Active

Works

Civil Works - Roads

Annual Plan-2026 27 KEEZHUPARAMBA GP VALIYAKUNN SAMSKARIKA NILAYAM RENOVATION-Project NO 90

Local Self Government Department

AE OFFICE, KEEZHUPARAMBA GRAMA PANJAYATH | Malappuram, Kerala

Amount: ₹1.7 LCloses: 15 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes15 Oct 2026
Bid Opening16 Oct 2026

Tender Value

₹1.7 L

EMD Value

₹4,232

Closing Date

15 Oct 2026, 10:00 am4d left

Tender Inviting Organisation

Name

DEEPAK C

Address

DEEPAK C AE KEEZHUPARAMBA GP

Work Description

Annual Plan-2026 27 KEEZHUPARAMBA GP VALIYAKUNN SAMSKARIKA NILAYAM RENOVATION-Project NO 90

Tender Information

Tender ID

2026_LSGD_877121_17

Reference Number

04/AE/LSGD/KZP/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

180 days

Location

AE OFFICE, KEEZHUPARAMBA GRAMA PANJAYATH

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredNIT (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredCONTRACTOR LISCENCE (.pdf)

RequiredINTEGIRITY PACT (.pdf)

RequiredPRELIMIARY AGREEMENT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹4,232

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

7 Oct 2026

Download Ends

15 Oct 2026

Submission Starts

7 Oct 2026

Clarification Period

7 Oct 2026 - 15 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (9 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1samskarika nilayam renovation
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.19	cum	330.41	₹63.44
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.19	cum	8,483.41	₹1,628.81
1.003	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	5.25	cum	6,906.51	₹36,259.18
1.004	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	75	sqm	339.63	₹25,472.25
1.005	OD230811/2026-2027:White washing with white cement on new work ( two or more coats)	75	1 sqm	40.6	₹3,045
1.006	13.51.1:Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:One coat	75	sqm	96.15	₹7,211.25
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	285.93	kg	171.81	₹49,125.81
1.008	OD228974/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	78	sqm	572.91	₹44,686.98
1.009	OD231201/2026-2027:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for Name Board, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, including lettering & fixing Granite of any colour and shade Area of slab upto 0.50 sqm	0.36	sqm	5,011.29	₹1,804.06

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.63 MB

Work Item Documents

NIT90.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1samskarika nilayam renovation
1.001	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.19	cum	330.41	₹63.44
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.19	cum	8,483.41	₹1,628.81
1.003	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	5.25	cum	6,906.51	₹36,259.18
1.004	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	75	sqm	339.63	₹25,472.25
1.005	OD230811/2026-2027:White washing with white cement on new work ( two or more coats)	75	1 sqm	40.6	₹3,045
1.006	13.51.1:Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:One coat	75	sqm	96.15	₹7,211.25
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	285.93	kg	171.81	₹49,125.81
1.008	OD228974/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	78	sqm	572.91	₹44,686.98
1.009	OD231201/2026-2027:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for Name Board, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, including lettering & fixing Granite of any colour and shade Area of slab upto 0.50 sqm	0.36	sqm	5,011.29	₹1,804.06

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1samskarika nilayam renovation

1.001

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.19

cum

330.41

₹63.44

1.002

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.19

cum

8,483.41

₹1,628.81

1.003

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

5.25

cum

6,906.51

₹36,259.18

1.004

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

sqm

339.63

₹25,472.25

1.005

OD230811/2026-2027:White washing with white cement on new work ( two or more coats)

1 sqm

40.6

₹3,045

1.006

13.51.1:Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:One coat

sqm

96.15

₹7,211.25

1.007

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

285.93

171.81

₹49,125.81

1.008

OD228974/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

572.91

₹44,686.98

1.009

OD231201/2026-2027:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for Name Board, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, including lettering & fixing Granite of any colour and shade Area of slab upto 0.50 sqm

0.36

sqm

5,011.29

₹1,804.06