REPAIRS AND MAINTENANCE INCLUDING ROUTINE PREVENTIVE MAINTENANCE OF SEWAGE PUMPING SETS, MOTOR, STARTERS AND ALLIED WORKS AT VARIOUS SEWAGE INSTALLATIONS INCLUDING CLEANING AND REPAIR OF UG SUMPS AT VARIOUS SEWAGE INSTALLATIONS AT AFA HYDERABAD

M&L for Cleaning of Sumps, Chambers etc. by removing sludge, mud, debris and foreign materials by scrapping all the surfaces with wire brushes, scrappers etc. and removing the sludge, debris, and foreign materials etc. to a distance not exceeding 150 mtr away from STP site, cleaning with fresh water (internally) and disinfectant solution including applying of two coats of lime white wash internally & externally (above ground) complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacity :- (400 KLD)

(a) Under Ground Equalization Tank of size (8X 5.5X 3.5) cum.

(b) Semi Under Ground Areation Tank of size (18.8X 7.5X 3.5) cum.

(c) Semi Under Ground Secondary settling Tank of size (7.5X 4.1X 3.5) cum.

(d) Semi Under Ground Clarified Water Tank of size (5.6X 3.75X 3.5) cum.

(e) Sludge Holding Tank of size (3.75X 1.7X 3.5) cum.

(f) Sludge Drying Bed of size (8X 2X 1.5) cum.

(g) Treated Water Tank of size (7.7X 7.7X 3.5) cum.

M&L for Cleaning of Sumps, Chambers etc. by removing sludge, mud, debris and foreign materials by scrapping all the surfaces with wire brushes, scrappers etc. and removing the sludge, debris, and foreign materials etc. to a distance not exceeding 150 mtr away from STP site, cleaning with fresh water (internally) and disinfectant solution including applying of two coats of lime white wash internally & externally (above ground) complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacity :- (800 KLD)

(a) Equalization Tank of size (7.5X 3.65X 2.5) cum

(b) Bar Screen Chamber (2.2X 0.3X 0.4) cum

(c) Oil and Grease Trap (2.2X 3X 1.3) cum

(d) Sludge Holding Tank (3.1X 2.2X 2.3) cum

(e) Chlorine Contact Tank (5.2X 1.8X 1.8) cum

(f) Treated water Tank Capacity 50000 Ltrs

(g) Secondary Settler (5.2X 3.7X 2.7) cum

(h) Anoxic Tank (2.5X 2.3X 5) cum

(j) MBBR I & II (2.5X 2.5X 5) cum

M & L for cleaning of Sewage Treated Water Tank at FCM Sports Ground of capacity 50000 Ltrs by scrapping the internal surfaces with steel wire brushes, after pumping out water (approx 45000 Ltrs) completely by using pump set, removing silt/debris descaling with solution and removal of silt, debris, repairing minor cracks and applying water proofing compound chemical and making leak proof including applying two coats of lime white wash internally and externally (above ground), and applying two coats of synthetic enamel paint to inlet pipe above ground level and manhole cover/grills/wire mesh and two coats of tar epoxy over one coat of red oxide primer to the up and down ladders, cleaning the internal surface of the tank complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge.

Description all as per Item No 2 above but OMQ Area Sump of Capacity 64500 Ltrs

Description all as per Item No 2 above but SMQ Area Sump of Capacity 6000 Ltrs

Description all as per Item No 2 above but Type-I Area Sump of Capacity 44700 Ltrs

Description all as per Item No 2 above but Golf Area Sump of Capacity 13500 Ltrs

M&L for Cleaning of Sumps, Chambers etc. by removing sludge, mud, debris and foreign materials by scrapping all the surfaces with wire brushes, scrappers etc. and removing the sludge, debris, and foreign materials etc. to a distance not exceeding 150 mtr away from STP site, cleaning with fresh water (internally) and disinfectant solution including applying of two coats of lime white wash internally & externally (above ground) complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge at Sewage Pump House No 1 (Old Sewage Sump-Cum-Pump-House) of capacity 100000 Ltrs.

Description all as per Item No 3 above but New Sewage Sump-Cum-Pump-House of Capacity 140000 Ltrs

Description all as per Item No 3 above but SMQ Sewage Sump-Cum-Pump-House of Capacity 50000 Ltrs

Description all as per Item No 3 above but OMQ Sewage Sump-Cum-Pump-House of Capacity 50000 Ltrs

(a) 1 to 1.5 HP, 3 phase, 415 volts

(b) 2 to 3 HP, 3 phase, 415 volts

(c) 5 HP, 3 phase, 415 volts

(d) 7.5 HP, 3 phase, 415 volts

(e) 10 HP, 3 phase, 415 volts

(f) 12.5 HP, 3 phase, 415 volts

(g) 20 HP, 3 phase ,415 volts

(h) 30 HP, 3 phase, 415 volts

M&L for repairs to 1/1.5/2/3 HP, 3 Phase, 415 Volts Induction motor by taking down the burnt out winding from motor, cleaning and rewinding with super enameled copper wire of the same guage and same number of turns as per existing, reassembling the same, painting with one coat of synthetic enamel paint over a coat of red oxide primer after preparation of old existing surfaces incl testing complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge.

Description all as per item No 6.00 above but for 5 HP, 3 Phase, 415 Volts

Description all as per item No 6.00 above but for 7.5 HP, 3 Phase, 415 Volts

Description all as per item No 6.00 above but for 10 HP, 3 Phase, 415 Volts

Description all as per item No 6.00 above but for 12.5 HP, 3 phase, 415 Volts

Description all as per item No 6.00 above but for 20 HP, 3 phase, 415 Volts

Description all as per item No 6.00 above but for 30 HP, 3 phase, 415 Volts

Supply only CI / GM bushes of appropriate size / type perfectly matching existing 1-1.5 HP Centrifugal Pumping Set complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge.

Supply only CI / GM bushes of appropriate size / type perfectly matching existing 2.0 HP Centrifugal Pumping Set complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge.

Supply only CI / GM bushes of appropriate size / type perfectly matching existing Non Clog Centrifugal Pump Sets complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacity :-

(a) 5 HP, 3 phase, 415 volts

(b) 7.5 HP, 3 phase, 415 volts

(c) 10 HP, 3 phase, 415 volts

(d) 12.5 HP, 3 phase, 415 volts

(e) 20 HP, 3 phase, 415 volts

(f) 30 HP, 3 phase, 415 volts

M&L for repairing / resurfacing of CI Coupling by casting, machining such as turning, milling etc. perfectly matching existing Non Clog Centrifugal Pump Sets complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacity :-

(a) 5 HP, 3 phase, 415 volts

(b) 7.5 HP, 3 phase, 415 volts

(c) 10 HP, 3 phase, 415 volts

(d) 12.5 HP, 3 phase, 415 volts

(e) 20 HP, 3 phase, 415 volts

(f) 30 HP, 3 phase, 415 volts

M&L for replacement of CI Sluice Valve Spindle of SS with check nuts etc. including valve head gasket, gland packing, new nuts, bolts, washers etc. complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following sizes :

(a) 250 mm bore

(b) 200 mm bore

(c) 150mm bore

(d) 100mm bore

(e) 80mm bore

M&L for Servicing of CI Sluice Valves by taking out from existing position, refacing, regrinding, greasing & refixing with new nuts, bolts, washers, rubber insertions (gaskets), gland packing etc. in situ incl testing complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following sizes :

(a) 250 mm bore

(b) 200 mm bore

(c) 150mm bore

(d) 100mm bore

(e) 80mm bore

M&L for dismantling of existing Foot Valves of size 150 / 200 mm, cleaning it thoroughly internally and externally, replacing the gaskets, nuts, bolts, washers, greasing and bringing it to perfect workable condition and re-fixing in situ complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge.

M&L for painting of Nonclog Centrifugal Pump Sets of following capacity including inlet and outlet Pipes, Non Return Valves, Sluice Valves, Base Plate etc. complete with two coats of synthetic enamel paint including cleaning / preparation of old painted surfaces complete all as specified & as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacity :-

(a) 2 HP, 3 phase, 415 volts

(b) 5 HP, 3 phase, 415 volts

(c) 7.5 HP, 3 phase, 415 volts

(d) 10 HP, 3phase, 415 volts

(e) 12.5 HP, 3phase, 415 volts

(f) 20 HP, 3 phase, 415 volts

(g) 30 HP, 3 phase, 415 volts

Supply, install, testing & commissioning of CI Non-Return (Reflux) Valve 150 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/Kartar

Supply, install, testing & commissioning of CI Non-Return (Reflux) Valve 100 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/Kartar

Supply, install, testing & commissioning of CI Non-Return (Reflux) Valve 80 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/Kartar

Supply, install, commissioning & testing of CI Sluice Valve 250 mm bore, both ends flanged, class PN 1.6, ISI marked conforming to IS 14846:2000 with SS spindle and one number hand wheel including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-in-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of CI Sluice Valve 200 mm bore, both ends flanged, class PN 1.6, ISI marked conforming to IS 14846:2000 with SS spindle and one number hand wheel including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-in-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of CI Sluice Valve 150 mm bore, both ends flanged, class PN 1.6, ISI marked conforming to IS 14846:2000 with SS spindle and one number hand wheel including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-in-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of CI Sluice Valve 100 mm bore, both ends flanged, class PN 1.6, ISI marked conforming to IS 14846:2000 with SS spindle and one number hand wheel including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-in-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of CI Sluice Valve 80 mm bore, both ends flanged, class PN 1.6, ISI marked conforming to IS 14846:2000 with SS spindle and one number hand wheel including making new flanged joints with rubber gasket, necessary bolts, nuts, washers etc of suitable size incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

S&F cast iron fitting suitable for spigot and socket pipes/ Flanged type up to 250 mm bore such as bends (any type radius and angle), tappers any type (straight bend increasing, decreasing or double socket etc), TEE pieces, Single branch, Y junction double branch, Cross collars, caps, plugs etc. including rubber gasket joints incl testing & taking down old unsv fittings complete all as specified and to the entire satisfaction of the Engr-In-Charge.

M&L for taking out old unserviceable CI pipe of any type and any length including all fittings etc, with spigot and socket ends and lead joints including burning of lead joints from trenches of the following sizes complete all as specified and as directed by the Engineer-In-Charge for the following sizes :- Note : - Necessary earth work will be measured and paid separately.

(a) 250 mm bore pipe

(b) 200 mm bore pipe

(c)150 mm bore pipe

(d)100 mm bore pipe

(e) 80 mm bore pipe

Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 250 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Tata/Jindal/Electrosteel/Shri Kalashakti.

Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 200 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Tata/Jindal/Electrosteel/Shri Kalashakti.

Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 150 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Tata/Jindal/Electrosteel/Shri Kalashakti.

Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 100 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Tata/Jindal/Electrosteel/Shri Kalashakti.

Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 80 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Tata/Jindal/Electrosteel/Shri Kalashakti.

M&L for burning out old lead joint and taking out lead and M&L for new Run lead joints complete all as specified and to the entire satisfaction of the Engr-In-Charge for the following sizes of pipes :- Note:- Earth work and excavation will be measured and paid separately.

(a) 250 mm bore pipe

(b) 200 mm bore pipe

(c) 150 mm bore pipe

(d) 100 mm bore pipe

(e) 80 mm bore pipe

Excavation in trenches by mechanical or other means not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr in depth in hard and dense soil and getting out for repairs to water mains / valves / valve chamber including forming bottom surface to required level and gradient complete all as specified and as directed

Returning filling in including spreading, levelling, watering and well ramming, in layers not exceeding 25 cm thick in soil complete all as specified and as directed

Removing the surplus soil not exceeding 50 M and depositing where directed by Engineer-in-charge at a level not exceeding 1.5 Mtr above the starting point complete all as specified and gradient complete all as specified and as directed

Supply, install, commissioning & testing of Wafer type DI Butterfly Valve of 100 mm dia, PN 1.6 conforming to EN 593 / BS 5155 design standards, & tested in accordance with ISO 5208 / API 598, and valve markings shall comply with EN 19 requirements. The valve body shall be of robust single-piece construction made of Ductile Iron (IS 1865 / EN GJS 400-15) for higher strength and durability. Hydrostatically tested and supplied with necessary test certificates and technical data sheets. The valve shall be suitable for installation in horizontal or vertical pipelines and shall be complete in all respects for proper operation and performance incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of Wafer type DI Butterfly Valve of 80 mm dia, PN 1.6 conforming to EN 593 / BS 5155 design standards, & tested in accordance with ISO 5208 / API 598, and valve markings shall comply with EN 19 requirements. The valve body shall be of robust single-piece construction made of Ductile Iron (IS 1865 / EN GJS 400-15) for higher strength and durability. Hydrostatically tested and supplied with necessary test certificates and technical data sheets. The valve shall be suitable for installation in horizontal or vertical pipelines and shall be complete in all respects for proper operation and performance incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

Supply, install, commissioning & testing of Wafer type DI Butterfly Valve of 50 mm dia, PN 1.6 conforming to EN 593 / BS 5155 design standards, & tested in accordance with ISO 5208 / API 598, and valve markings shall comply with EN 19 requirements. The valve body shall be of robust single-piece construction made of Ductile Iron (IS 1865 / EN GJS 400-15) for higher strength and durability. Hydrostatically tested and supplied with necessary test certificates and technical data sheets. The valve shall be suitable for installation in horizontal or vertical pipelines and shall be complete in all respects for proper operation and performance incl taking down old unsv one complete all as specified and to the entire satisfaction of the Engr-In-Charge. MAKE : Leader/Kirloskar/Upadhyay/KARTAR

S&F GM Gate Valve 50 mm bore conforming to IS 781 -1984 with iron wheel head screwed both ends for iron pipe incl testing testing & taking down old unsv one complete all as specified and to the entire satisfaction of the Eng-in-Charge. MAKE : Leader/Tata/Zoloto/Kartar

Supply, install, commissioning & testing of Star Delta Starter with SS enclosure, fully automatic, 3 phase, 415 Volts, 50 Hz suitable for motor of upto 30 HP capacity perfectly matching with the existing system complete with O/V, U/V, O/L, SPP etc. safety features incl taking down unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : L&T/ABB/SIEMENS/BCH/SCHNEIDER

Supply, install, commissioning & testing of Star Delta Starter with SS enclosure, fully automatic, 3 phase, 415 Volts, 50 Hz suitable for motor of upto 20 HP capacity perfectly matching with the existing system complete with O/V, U/V, O/L, SPP etc. safety features incl taking down unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : L&T/ABB/SIEMENS/BCH/SCHNEIDER

Supply, install, commissioning & testing of Star Delta Starter with SS enclosure, fully automatic, 3 phase, 415 Volts, 50 Hz suitable for motor of upto 12.5 HP capacity perfectly matching with the existing system complete with O/V, U/V, O/L, SPP etc. safety features incl taking down unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : L&T/ABB/SIEMENS/BCH/SCHNEIDER

Supply, install, commissioning & testing of DOL Starter with SS enclosure, 3 phase, 415 volts, 50 Hz suitable for motor of upto 5 HP capacity perfectly matching with the existing system with & including necessary safety features incl taking down unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : L&T/ABB/SIEMENS/BCH/SCHNEIDER

Supply & Filling/Mixing Calcium based high strength chlorine granule for Chlorination/Disinfection/Water treatment purposes packed in 45 Kg drums complete all as specified and as directed by the Engr-in-charge. MAKE : RMCO/JAL AQUA/PURICHLOR or techno-commercially equivalent.

Specifications : Available Chlorine - 65% (Min) Stability - 1/15 (Max) [ Loss of Chloride on basis of available chloride] Particle Size (passing through 1.70 mm IS Sieve) - 99.5% by Mass (Min) Water Insoluble Matter - 6% (Max) Calcium Hydroxide - 4% (Max) Sodium Chloride - 15% (Max) Appearance - Dry free-flowing & free from lumps Toxic & Undesirable Substance - Should not induce substances beyond acceptable limit as given in IS : 10500 (incl latest amdts) in treated & disinfected water. IMPORTANT NOTE : 1) Calcium Based Granular Disinfectant is to be purchased either directly from Manufacturer/Auth Dealer/Distributor only. 2) Tax Invoice & Original manufacturer test certificates duly signed & certified by the Manufacturer/Auth Dealer/Distributor is to be submitted by the Contr to the Engr-In-Charge. 3) Calcium Based Granular Disinfectant is to be purchased by the Contr in such a manner that either atleast 1 year of residual life is there on receipt of the material or the required qty of materials is to be purchased/ordered in lots as per the requirement of the Dept (MES).

M&L for disconnecting the suction and delivery pipe lines and electric connections for Non-clog Diesel Engine Pump Sets of Sewage Installations of 10 HP capacity, servicing it throughly by carrying out repairs such as replacing wornout bearings, shaft/ bushes, nuts, bolts, washer, greasing and bringing it to a perfectly workable condition and connecting up of suction and Delivery pipelines incl testing complete all as specified and as directed & to the entire satisfaction of the Engr-In-Charge. Note: The unit rate quotred against the item includes cleaning / repairs / replacement of minor items such as nuts, bolts, gland rope, packing materials etc, removing from its original position carefully and transporting the same to work shop, dismantling / opening the engine for inspection, repair / replacement of worn out parts with new one incl cleaning, lubricating, replacing the minor items like studs, nuts, bolts, washers etc. reassembling the Diesel Engine Pump Set including painting with two coats of synthetic enamel paint, transporting back and refixing the same in its original position incl all necessary connections, testing and commissioning complete all as specified and as directed.

Description all as per item No 45 above but of capacity 5 HP.

Supply & lay heavy duty HDPE pipe green / purple coloured of dimensions and specification all as per IS-4984 and pressure rating PN-10 including necessary fittings such as elbows, tees, sockets etc. incl testing & taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engr-In-Charge for the following sizes:- Make : ASTRAL / SUPREME / FINOLEX

(a) 100 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

Supply & lay heavy duty 3-layer PPR random copolymer) concealed pipes of size 16 mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. incl testing & taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engr-In-Charge. Make : SUPREME / SFMC /FINOLEX / ASTRAL

S&F PTMT Bib Tap, Heavy duty / High Pressure of size 15 mm incl necessary fixing arrangements, testing & taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engr-In-Charge. Make : PRAYAG / SUPREME

S&F Gate Light fitting, IP-54 rated Decorative Outdoor type with & incl 01 x 15W LED Bulb B22 3 Star & including all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. fitted on & with & including GI Pipe 40 mm dia or suitable size of required length & suitable/required PCC work and connecting up electrically from Junction box etc. to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Model - Hester H1 of Make : Luker or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR.

S&F 10W CDL LED Bollard Landscape fitting, IP-65 rated Inverted Pyramid Tripod type made in Aluminium Die Cast Housing with soft 360' light distribution with efficient heat sink for better life, 4KV Surge Protection, Potted Driver with & including all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. on PCC Plinth/Platform made up of PCC(1:2:4) base having dimensions 20x20x30cm and connecting up electrically from Junction box etc. to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Model - Liara of Make : Crompton, Cat No : LBLSN-10-CDL or techno-commercially equivalent in LUKER/HAVELLS/BAJAJ/PHILIPS/JAGUAR.

Supply and fix energy saving high power LED Street light of 30W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 10% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE030S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR

S&F LED flood light fitting of capacity 50 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 10% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on Poles/Bldg Surface etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL50LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR

S&F LED flood light fitting of capacity 150 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 10% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on Poles/Bldg Surface etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL150LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster

M&L for cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) in plinth courses, string courses, lacing courses, parapets and railings, copings, kneelers, apex stones, bed plates, kerbs, water troughs, foundation, supports, anchor blocks and the likes including weathering, slightly rounded or chamfered angles and throating complete all as specified and to the entire satisfaction of the Eng-in-Charge.

M&L for cutting grass, bushes, creapers, weeds, unwanted plants/growths etc in and arround water supply installations, settling tanks, weirs, check dams or any other locations as decided by Engr-In-Charge/GE and removing rubbish off the premises complete all as specified and to the entire satisfaction of the Engr-In-charge.

M&L for fabrication of FIRE FIGHTING Point by making suitable Steel Structure and making Weather Proof Roof Sheeting with appropriate size/type Galvalume Sheets etc. and providing 03 x Iron buckets, 01 x Fire Hook, 01 x Fire Beater, 02 x Fire Extinguisher ABC Type of 6 Kgs Capacity with all necessary hanging arrangements including painting with Fire Red paint after preparation of surfaces and embozing Technical Details with White Paint with & including necessary PCC foundation work complete all as specified and as directed and to the entire satisfaction of the Eng-in-Charge.

M&L for construction of brick masonary valve pit of internal dimensions 1200 mm x 1200 mm x 1200 mm complete and fabrication of 4.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and to the entire satisfaction of the Engr-in-charge.

Supply and fix Welded steel wire fabric to fix on steel frame with necessary welding work and making necessary arrangement for discharge water pipe after necessary painting work complete all as specifed and directed.

Supply, install, commissioning & testing of Motor Control Panel "out-door type" of size 1000 mm (height) x 9000 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories :

Supply, install, commissioning & testing of 03 phase 10 HP Openwell Submersible Pump Set KOS-1040 MODEL of Make Kirloskar or techno-commercially equivalent model of KSB/JYOTI/CROMPTON with 2800 RPM, Head 26 Mtr, Discharge Capacity 930 LPM, 3 phase 415V AC, Suction size 65 mm & Delivery size 80 mm, pump with GM Impeller, SS Shaft with CI Pump Casing all as per manufacturer specification fixed to suitable foundation bolts, nuts grouted in and incl inlet and outlet pipe & necessary electrical connections etc. complete all as specified and directed & to the entire satisfaction of the Engr-In-Charge.

M&L for HDPE DWC (Double Wall Corrugated) Pipe of rating 450 N, ISI marked with Min OD 63 mm & Min ID 50 mm, Orange colour for LT UG Cable protection with & including Couplers with rubber rings & RR & NFP properties/features confirming to IS 16205 Part 24:2018 & IEC 61386 Part 24:2007 with & including necessary clamping on wall / other surfaces complete all as specified & as directed by the Engr-In-Charge. Make - Supreme (Cable Guard) / Astral (Telerex) or techno-commercially equivalent of Finolex / Polycab. NOTE : Purchase Vouchers & Test Certificates to be submitted in Original to the Engr-In-Charge.

Please Enable Macros to View BoQ information