30/2022-23(EDCR) Shifting of 31 KV line C/O Sh. Tulshi Ram, Village Ramnagar, Milak, Rampur, 33 KV Line C/O Mosin Khan, village Safni, Rampur, releasing of connection 37 KVA in f/o M/S Navkar foods, Rampur and 25 KVA in f/o Fire Station Loha patti Mi

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

11 Mtr Long ST pole

8.5 PCC Pole

LT Cable

ACSR Weasel Conductor

Dog Conductor(70*3+5%)

other line material such as X-arm, etc.

XLPE Cable

11/0.4 Kv 63 KVA Transformer

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

8.5 Mtr long PCC pole

11 Mtr long ST pole

b) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr long PCC pole

11 Mtr long ST pole

b) Double pole structure

8.5 Mtr long PCC pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Fixing, tightening of 33/11 KV Pin Insulator with Pin on pole as required.

Fixing, tightening of 33/11 KV Disc Insulator with Pin on pole as required.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Laying, sagging, stringing and binding with jumpering etc of ACSR Weasel Conductor with Jumpering as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, stringing and binding with jumpering etc of XLPE Cable with help of Jointing Kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, stringing and binding LT Cable as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, stringing and binding Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Gaurding of road crossing Span with GI wire 6 SWG

Providing & Fixing of Danger board with clamp

Installation of 11/0.4 KV 63 KVA Transformer including earthing and making connection etc.

Providing and Fixxing/Fitting Barbed wire

Providing and fixing nut and bolts

Providing and fixing F Bracket with bolts and nuts

Providing and fixing PG Clamp for Dog Conductor

Providing and fixing Clamp for D/P

Providing and fixing of clamp for T-of Channel with Bolts & Nut

M/s Charley Enterprises