Repairs, Painting and Electrification work to office building and Repairs and CC flooring to open platforms 4Nos in Market Yard, Krosuru of A.M.C, Krosuru in Palnadu District

Ceiling Plastering with C.M (1:3) 12mm thick in single coat including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, including screened sand, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by the Engineer-in-charge.

Providing Imperious coat to exposed RCC roofslab surface C.M (1:3) 20mm thick with 1kg pf water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread linning, curing, rounding off junctions of wall and slab etc., complete as finished item of work as per standard specification and as directed during execution by the Engineer-in-charge.

Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of Old walls two coats of approved make shade and colour including cost and conveyance of materials like Plastic Emulsion paint, to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, two coats of Plastic Emulsion etc., complete for finished item of work.

Removing of existing damaged Napa flooring/Pre-cast blocks including cost and conveyance of all materials and all labour charges for removing of C.C. flooring etc., complete for finished item of work.

Dismantling of damaged existing VCC Flooring including cost and conveyance of all materials and all labour charges etc., complete.

Filling with 2.36 mm H.B.G. Chips and bellow in foundations for filling in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges etc., complete for finished item of work as per standard specifications.

V.C.C M20 grade Nominal mix using 66.66% of 40mm and 33.33% of 20mm HBG metal machine crushed metal including cost and conveyance of all materials and all other materials from approved source to site including labour charges for machine mixing, laying, vibrating and curing including all incidental and operational charges, all water leads and lifts etc., complete for finished item of work as per standard specifications and as directed by engineer-in-charges at site of work.

Providing polythene sheet 125 mm microns including cost and conveyance of all meterials and all labour charges ect., complete for finished items of work.

Plastering with C.M (1:5) 12mm thick in single coat including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, including screened sand, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by the Engineer-in-charge.

Painting to Old walls with 2 coats of plastic emulsion paint of Over 1Coat of primer approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item ofwork as per SS 911

Construction of Sawn joint groove (using diamond studded blades 3 to 5mm wide, 25mm complying with clause 602.6.5) of specification of roads and bridge work (3rd revision) published art New Delhi in 1995 by IRC on Behalf of Government of India, Ministrey of surface transport and as detailed in the drawings. The contaction joins shall be cut neatly with straight line. The Joint Ceiling compound shall be of not poured bitumen type ceiling compound shall be not poured bitumen type having flexibility, resistance to age hardening and durability of the sealant shall be in accordance with BS 5212 (Part-2) with all lead and lift including cost and conveyance of all materials and all labour charges etc., completed and as directed by the Departmental Engineer-in-Charge.

Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications

Providing Disk Finished flooring to the cc surface for having good compaction of cc surface and to have smooth suface of the road including cost and conveyance of all materials and hire charges of disk and fan, all incidental etc., complete.