Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAdmitted-Finance 1ST FLOOR A 40 RAJPARK SULTANPURI NORTH WEST DELHI DELHI 110086 | NORTH WEST DELHI | DELHI | 110086 | ₹30.4 L | L1 | Admitted-Finance |
| 2 | L1₹33.0 LAdmitted-Finance 37 110 INDUSTRIAL ESTATE KOPERGAON 423601 | KOPERGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | ₹33.0 L | L1 | Admitted-Finance |
| 3 | L1₹33.6 LAdmitted-Finance | ₹33.6 L | L1 | Admitted-Finance |
| 4 | L2₹10.7 LAdmitted-Finance RZ F 905 8 RAJ NAGAR II PALAM COLONY NEW DELHI SOUTH WEST DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | ₹10.7 L | L2 | Admitted-Finance |
| 5 | L3₹11.7 LAdmitted-Finance | ₹11.7 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | ASHOKA FURNITURES L8 | swastik industries L1 | M/s Makhan Lal L3 | shiv shakti steel industries L6 | Navkar Enterprises L7 | Pratik Enterprise L4 | Capital Construction Company L9 | M/s M M BAHL L5 | JAI TRADERS(INDIA) L1 | SHRI GAJANAND ENTERPRISES L2 | O.K. ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00SCH 'A' PART-I (WOODEN FURNITURE) | ||||||||||||||
| 1.01 | PEG TABLE (FD-384)
DIMENSION;Overall size shall be 450mm long,300mm wide and 380mm high.
DESCRIPTION:Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table.
FINISH:All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg. | 449 | Nos | 760 ₹3.4 L | - | 600 ₹2.7 L | 700 ₹3.1 L | 810 ₹3.6 L | 574 ₹2.6 L | 1,009 ₹4.5 L | 650 ₹2.9 L | - | 590 ₹2.6 L | - |
| 1.02 | TABLE DRESSING GENTS WITH MIRROR (FD-379)
DIMENSION : Over all size shall be 900mm long , 30mm wide and 150mm high at bottom with support of mirror as 1115 mm high.
DESCRIPTION : The frame of mirror shall be overall size of 410mm wide and 790mm high fixed at 150mm from top of lower base. The entire box shall be made of 12mm thick prelaminated MDF board except back and bottom which shall be of 12mm thick plywood. The sides of the drawers shall be made 12mm thick commercial ply with bottom of 6 mm ply and front of 12mm thick perlaminated MDF board . The Mirror of 380x760mm shall be provided with its wooden frame made of 25mmx35mm teak wood batterns. The bach shall be of 6mm thick plywood 5.5mm thick mirror distortion free shall be provided on 6mm thick plywood backing 3 mm thick flat Iron key plates of MS. Two Knobs of aluminium anodzed dark brown in shade shall be provided to both the drawers 25mmx25mm in section shall be provided at top of mirror and painted with black paint .
FINISH : All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish. Rest all as per Drg. | 151 | Nos | 4,009 ₹6.1 L | - | 2,500 ₹3.8 L | 4,500 ₹6.8 L | 4,500 ₹6.8 L | 3,174 ₹4.8 L | 5,109 ₹7.7 L | 3,700 ₹5.6 L | - | 2,200 ₹3.3 L | - |
| 1.03 | TABLE DINING 4 PERSONS (FD/MAP-II/03)
(a) Table dining shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS.
(b) Timber: All wood work shall be kiln seasoned and chemically pressure treated Ist class hard wood (Teak) throughout except the top which shall be made of melamine faced pre-laminated MDF board 18/ 19mm thick bonded with phenol formaldehyde as per as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 6mm thick teak wood beading and shall be fixed as specified.
(c) Finishes: All timber / plywood / particle board surfaces exposed to view shall be French polished except inner side of top which shall be painted with one coat of synthetic enamel paint (Shade as approved by GE) Ist quality over a coat of pink primer.
(d) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. | 11 | Nos | 6,520 ₹71,720 | - | 5,000 ₹55,000 | 5,500 ₹60,500 | 5,220 ₹57,420 | 3,874 ₹42,614 | 5,309 ₹58,399 | 4,800 ₹52,800 | - | 4,500 ₹49,500 | - |
| 1.04 | TABLE DINING 6 PERSONS (FD/MAP-II/03)
(a) Table dining shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS.
(b) Timber: All wood work shall be kiln seasoned and chemically pressure treated Ist class hard wood (Teak) throughout except the top which shall be made of melamine faced pre-laminated MDF board 18/ 19mm thick bonded with phenol formaldehyde as per as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 6mm thick teak wood beading and shall be fixed as specified.
(c) Finishes: All timber / plywood / particle board surfaces exposed to view shall be French polished except inner side of top which shall be painted with one coat of synthetic enamel paint (Shade as approved by GE) Ist quality over a coat of pink primer.
(d) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. | 10 | Nos | 7,600 ₹76,000 | - | 5,500 ₹55,000 | 6,000 ₹60,000 | 5,805 ₹58,050 | 4,874 ₹48,740 | 6,109 ₹61,090 | 5,400 ₹54,000 | - | 4,800 ₹48,000 | - |
| 1.05 | SIDE BOARD (FD-241)
(a) TIMBER : All wood work shall be kiln seasoned and chemically pressure treated Ist class hard wood (Teakwood).
(b) BOARD : (i) 18/19 mm thick melamine faced pre-laminated particle board bonded with phenol formaldehyde as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges for top, front shutter, bottom and sides.
(ii) 18/19mm thick and 12 mm thick melamine faced pre-laminated particle board bonded with phenol formaldehyde as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges for shelves and back respectively.
(c) EDGING : Exposed edges of board shall be covered with 4mm thick teak wood edging and shall be fixed as specified and directed.
(d) PLY : 6mm thick ply for bottom of drawer shall be provided.
(e) KNOB : 38mm dia anodised metalic knob (teak colour) as shown on drawings shall be provided.
(f) POLISH : All exposed wood work and teak veneered surfaces shall be french polished.
(g) REST : All as shown on drawing. | 9 | Nos | 8,500 ₹76,500 | - | 4,500 ₹40,500 | 9,000 ₹81,000 | 7,200 ₹64,800 | 4,874 ₹43,866 | 8,309 ₹74,781 | 6,500 ₹58,500 | - | 5,500 ₹49,500 | - |
| 1.06 | SOFA SINGLE CHAIR WITH CUSHION (FD-373)
DIMENSION : Overall size of one Seat shall be 670mm long and 745 mm wide abd 530mm high up to arm rest level.
DESCRIPTION: The Sofa set single seaters shall consist of one single seats. All wood shall be of first class teak wood (MP ) Legs of sofa set shall be 70mmx35mm in section teak wood. Front legs shall be joined by 100mmx35mm section wooden rail in front. and rear lege shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick seat causion and back casusion shall be of size 530mm x560mm (One numbers in seat and one numbers in the back). The causion shall be of caool foam or any other superior quality foam of 40 density as approved by Engineer-in-charge. Causion shall be covered with approved color tapestry cloth (approved by GE, not less than Rs 300/meter) or as directed by Enginner-in-charge.
FINISH : All wood surface exposed to vew when placed in position shall be French polished with lacquer finish rest Rest all as per drg. | 5 | Nos | 6,007 ₹30,035 | - | 4,000 ₹20,000 | 9,000 ₹45,000 | 6,003 ₹30,015 | 4,874 ₹24,370 | 6,009 ₹30,045 | 5,400 ₹27,000 | - | 3,200 ₹16,000 | - |
| 1.07 | ALMIRAH MESS UTENSILS (FD-93)
All as shown on drawing. Overall size shall be 1065mm long, 455mm wide and 1670mm high. All wood shall be of first class hard wood teak (MP). Legs shall be 50mm square at top and 40mm square at bottom and shall 1 be 100mm high. 19mmx40mm teak wood stiffeners shall be provided between
legs joining legs in short span and long span. Bottom half shall have cupboard covered with 19mm thick pre-laminated particleboard teak veneer on one side. and having two shutters hinged with sides with 50mm long butt hinges. Top of cup- board shall be of 19mm thick pre-laminated particleboard teak veneer on one side and other side plain. Cupboard shall have two 19mm thick teak wood shelves resting on 19mmx 12mm teak wood bearers fixed on sides equally spaced to make into three compartments. Bottom of cupboard shall have 19mm thick wooden plank. Sides of cupboard shall be made of 19mm thick teak wood planks.
Back of Almirah shall be provided with 10mm thick plywood commercial. Top of Almirah Mess Utensils shall be of 19mm thick leak wood plank 200mm wide and 1065mm long. Top shelf shall have teak wood plank with plastic laminated sheet 1.5mm thick. A partition plank of 19mm thick teak wood shall be provided in vertical position405mm from left between bottom of top shelf and top of cupboard. A small shelf of 405mm shall be provided on the left side dividing the portion into equal half and shall have 12mm thick teak wood plank covered with 1.5mm thick plastic laminated sheet. Front of shelves and front of top of almirah shall be covered with 12mmx40mm teak wood facia upto entire length of shelf and top of almirah. Bottom cupboard shutters shall be provided with two numbers aluminium handles of 100mm long and two ball spring catches as shown on drawing. All wood surfaces exposed to view when placed in position shall be polished with two coats of melamine polish with spray machine after preparation of surfaces. Inside cupboard shall be given two coats of white enamel paint over a coat of primer as directed by GE. | 8 | Nos | 20,290 ₹1.6 L | - | 12,000 ₹96,000 | 9,000 ₹72,000 | 18,000 ₹1.4 L | 8,874 ₹70,992 | 20,709 ₹1.7 L | 7,600 ₹60,800 | - | 4,500 ₹36,000 | - |
| 1.08 | CHAIR WRITING (FD-280)
DIMENSION: The overall size shall be 600mm long, 450mm wide and 540mm high.
DESCRIPTION :The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws.Top of table shall be of 18 mm thick pre-laminated MDF board with 4mm teak wood edging al-round the top of table.
FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg | 25 | Nos | 2,029 ₹50,725 | - | 1,350 ₹33,750 | 2,300 ₹57,500 | 1,800 ₹45,000 | 1,474 ₹36,850 | 2,609 ₹65,225 | 1,890 ₹47,250 | - | 1,550 ₹38,750 | - |
| 1.09 | CHAIR EASY (FD-229)
(a) Chair easy shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS.
(b) Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout.
(c) Canning: Canning shall be done with 2 mm wide and 0.4mm thick plastic cane half round superior quality closely woven in Godrej pattern. Width of cane for border and strengthening band shall be 3.5mm.
(d) Rubber Toes : Rubber Toe shall be hard and of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size.
(e) Finishes: All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished.
(f) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. | 64 | Nos | 2,740 ₹1.8 L | - | 2,000 ₹1.3 L | 2,600 ₹1.7 L | 2,430 ₹1.6 L | 2,174 ₹1.4 L | 4,409 ₹2.8 L | 2,290 ₹1.5 L | - | 1,990 ₹1.3 L | - |
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
22 Apr 2026, 6:00 pmClosed
CWE AHMEDABAD
CWE Ahmedabad Hanuman Camp Shahibaug Ahmedabad PIN-380003
SPECIAL REPAIR OF WOODEN AND STEEL FURNITURE AGAINST BER FURNITURE ITEMS AT AHMEDABAD CANTT
2026_MES_758125_1
87485/E8
Open Tender
Civil Works
120 days
ARMY AREA AHMEDABAD
AS PER NIT
6 documents required · 6 mandatory
₹1,000
GE (A) AHMEDABAD
₹1.2 L
Yes
4 May 2026
27 Mar 2026
30 Apr 2026
27 Mar 2026
22 Apr 2026
17 Apr 2026
27 Mar 2026 - 16 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
SCH 'A' PART-II (STEEL FURNITURE) | - | - | - | - | |
ALMIRAH MEDIUM STEEL WITH SHELVES (FD-1032)
Overall size shall be 1270mm high,765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves. a steel chromium plated handle 100mm long shall be provided to the shutter. A three way locking device shall be provided to front shutters. PVC sheet of size equal to size of leg base shall also be fixed under the legs of almirah irrespective of what is shown on drg .All joints and welding, fixing shall be done according standard workmanship. All steel surfaces exposed to view when placed in position shall be painted with two coats of granular silver grey enamel paint over a coat of primer with spray machine after preparation of surfaces Rest all as per drgs | 28 | Nos | - | - | |
ALMIRAH LARGE STEEL WITH SHELVES (FD-1031)
(a) Almirah large steel shall be made to the shape, size and design as shown on drg and shall be manufactured in accordance with relevant IS.
(b) Almirah large steel shall be manufactured out of plain black MS sheet of thickness as shown on drawing. A 3 way locking device shall be provided to front door shutter with 10 mm MS round bar. Main door handle shall be 125 mm long steel CP handle and six levers locking device with keys in duplicate for each almirah. Lock shall be of make Godrej/Harrsion/Link as approved of GE in writing.
(c) Bending, welding, riveting, bolting, lapping, turning and other items/ fitting shall be done/provided as specified in relevant IS and as per trade engineering norms and pattern.
(d) Finishes: - All internal/external exposed steel surfaces shall be given two coats of synthetic enamel paint (Olive green/Smoke grey as approved by GE) over a coat of red oxide primer (Spray painting).
(e) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. | 32 | Nos | - | - | |
TABLE BED SIDE MAP (FD/E6/MAP/15 (R))
The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg.The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. The two sides and top shall be made up of 18mm thick prelamainted MDF board exterior grade. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood BWR grade duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood irrespective of what is shown on drg, except the front side which shall be of 18mm thick prelaminated MDF board exterior grade. The drawers shall be made functional on telescopic channales fixed inside the tables shown on drg.The drawers of the tables shall be provided with 100mm long CP handles .Rest all as per drg. | 93 | Nos | - | - | |
CHARPOY WITH HARD TOP (FD/MAP-II/01)
Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg..PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg | 150 | Nos | - | - | |
CHAIR CB STEEL WITH ARMS (FD-75(M))
DIMENSION:Overall size shall be 535mm wide,560mm deep and 900mm high.
DESCRIPTION:Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm Welding of frame where required shall be as directed by GE/BSO and in running welding grinded to give smooth surface. .The wooden seat frame shall be further supported by steel strips measuring 19mm x 3mm at the front and the rear and each strip shall be welded to ERW frame.The seat and back shall be fixed by providing suitable nut bolts and washers..The arms shall be of PPCP material in lieu of wooden and shall be fixed with screws from beneath.The Seat and Back should be made up of cushion foam of density 40 D of Make as approved by GE/Engineer-in-Charge over 12mm ply at bottom with a stiffner of flat iron of size as directed by GE/Engr-in-Charge.Bottom of legs shall have hard rubber shoes.
FINISH: All iron surfaces exposed to direct view shall be painted with two coats of enamel grey paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces. | 75 | Nos | - | - | |
BOOK SELF OPEN LARGE STEEL (FD-69(M))
All as shown on drawing. Over all size shall be 915mm long , 305mm wide and 1905mm high. Sides and back shall be covered with 1mm thick mild steel sheet.Slotted angle 25mmx25mmx3mm shall be provided at front and back as show on drawing. 3mm thick corners of 75mmx75mm shall be fixed at front and back to the top and bottom shelves. Seven shelves including top and bottom shall provided equaliy to make six comppartments . All steel and iron surface shall be steel surfaces as directed by GE. Welding shall be done as per trade practice and as directed by GE. | 53 | Nos | - | - | |
CHAIR COMPUTER (FD/E6/MAP/01)
The Base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high .The Chrome Pedsatal shall be provided with 05 Nos of Nylon Wheels fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround.The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert .It shall be scratch and weather resistant. The Back shall be made up of mesh Fabric Rest all as per drg.and as per sample approved by BSO/GE | 17 | Nos | - | - | |
CHAIR VARANDAH (FD/MAP-II/06)
The overall size of the chair shall be 455mm wide 455mm deep and 940mm high. The frame of the chair shall be of 19mm dia MS tube of wall thickness 1.6mm duly powder coated. The seat and back of the chair shall be of PVC 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on seat and back. One stiffener 19mm dia MS tube shall be provided in between the front legs as shown in drg. An additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of PVC seat irrespective of what is shown on drg. Rubber shoes of best quality shall be provided to each end of legs.Rest all as per drg. | 247 | Nos | - | - | |
TABLE STEEL WITH DRAWER (900mmx600mm760mm) ( FD-1008 )
(a) Table steel with drawer shall be made to the shape, size and design as shown on drg and shall be manufactured in accordance with relevant IS.
(b) Legs, top rails and stiffeners shall be of 25mm MS square tube 1.6 mm wall thickness.
(c) Bending, welding, riveting, bolting, lapping, turning and other items/ fitting shall be done/provided as specified in relevant IS and as per trade engineering norms and pattern.
(d) Drawer: 1mm nominal thick MS sheet and shall be provided with PVC covering recessed handle and locking arrangement as shown on drawings.
(e) Wood work: Top shall be made out of 19mm thick melamine faced pre-laminated particle board 18/ 19mm thick bonded with phenol formaldehyde as per as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 4mm thick teak wood beading all-round as directed by GE.
(f) Legs shall be provided with rubber shoes with steel plate inside of appropriate size
(g) All exposed steel surfaces shall be spray painted with two coats of synthetic enamel paint (Olive green/Smoke grey as approved by GE) over a coat of red oxide primer. Teak wood beading shall be French polished.
(h) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. | 92 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
TENDER.pdf
Tender Documents • 0.59 MB
BOQ_849171.xls
BOQ • 0.29 MB
BOQWOODEN.xls
Additional Documents • 0.29 MB
Download all tender documents and submit your bid