S C Development Corpus Fund Plan Mini WSS to Moorthimuruppu SC colony in ward NO 8 Vallikkodu Grama Panchayathu Phase 1 Construction of 30000 Litre OH Tank Supply Erection and Commissioning of 30 HP Submersible pump set at Intake

Amount

Construction of 30000 litres capacity OH tank

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.9.1:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock

2.9.3:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited)

OD99165/2022-2023:Drilling holes in hard rock 60 cm depth and 60 cm above and using 16 m.m dia tore steel including hire charges of air compressor,cost of cement, steel, labor charges etc complete as per the direction of departmental officers.<br>

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

OD99319/2022-2023:Supplying and fixing CI /DI wall casting pipe of size 100 m.m for distribution, scour,over flowpipes ,pumping main including cost and conveynace of wall casting pipe ,labour charges for fixingetc complete as per the direction of departmental officers

OD99382/2022-2023:Supplying and fixing CI /DI wall casting pipe of size 150 m.m for distribution, scour,over flowpipes including cost and conveynace of wall casting pipe ,labour charges for fixing etc completeas per the direction of departmental officers.

OD99384/2022-2023:Supplying and fixing CI man hole cover 60x60 /nearest size as per the direction of departmentalofficers.

18.30.2:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:100 mm diameter pipe

18.30.4:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:150 mm diameter pipe

18.31.1.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 100 mm diameterClass II

18.31.3.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 150 mm diameterClass II

OD99406/2022-2023:Providing ventilation facilities using 63 m.m PVC pipe(10 kg) required length and connecting,63x63x63 m.m PVC Tee and specials including cost of materials and labour charges for cuttingand placing in position

100.36.1:Filling water with 5000 litre tankers fited in lorry and conveying water from a distance of 5 km (average) to the reservoir site and pumping the water into the reservoir of height not less than 3 m using 5 HP diesel engine pump set , hire for tanker lorry, tools and other appliences and cost of water etc. complete.

OD99459/2022-2023:Fabricating and providing ladder using 40 m.m GI (m) pipe for vertical 2 nos placing apart 50 cmand 25 m.m GI (M) pipe 45 cm length for horizontal pieces 30 cm apart including cutting the GIpipe required lengths and welding in proper line and level and fixing in proper alignment andproviding concrete bat required portion for firmly fixing including the cost of all materials , fittingcharges , two coat of painting etc complete but excluding the cost of concrete.

OD99463/2022-2023:Conveying and providing 100 m.m GI M pipe in vertically/horizontally at tank for over flow pipe,scour , pumping main etc complete as per the direction of departmental officers.

OD99469/2022-2023:Supplying 100 m.m MS flange/MS plate

OD99471/2022-2023:Supplying 150 m.m MS flange/MS plate

OD99475/2022-2023:Supplying 100 m.m GI pipe (m)

OD99482/2022-2023:Cutting 100 m.m GI (m) pipe

OD99487/2022-2023:Providing welding joint to 100 m.m GI pipe 3 runs including the cost of all materials, labourcharges, hire for tools and plants etc complete

OD99496/2022-2023:Painting letters and figures 15 cm height block, roman or Indian with any kind of paint as per thedirection of departmental officers.

Supplying and installing 30 HP Submersible pump set at intake pump house and pressure filter 0.75 MLD

OD99945/2022-2023:Design, supply, installation of satisfactory trial running of mechanical pressure filter unit ofcapacity 0.75 mld, consisting of the following components with manual operation and minimumpressure loss. <br>Pressure filter unit with sand filter vessel of carbon steel(IS 2062) having shellthickness 10 m.m and dish 12 m.m with epoxy coating out side and GRP lining inside suitable foran operating pressure of 4 kg/cm2 and test operating pressure of 6kg/cm2 and test pressure of10kg/cm2. Filter with MS specials disc plate fitted at bottom for collection chamber and filterchamber having filter media consisting of pebbles of 400 m.m height and sand having 625 m.mheight of effective size of 0.6 and uniformly coefficient 1.3 to 1.7 with disc type strained. <br><br>Providing foundation including necessary trenching works as per the dia of pressure filterrequired depth and providing RCC 1:2:4 mix using 10 m.m dia bar laid 15 c.c C/C at bothdirections and providing R.R masonry foundation in the same width and length and requiredheight above ground and providing RCC 1:2:4 mix using 10 m.m DIa bar 15 cm C.C and firmlyfixing the filter unit as per the direction of departmental officers.<br>

Laying Pumping Main - (First Reach 1848 M)

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

OD103456/2022-2023:Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., including cost of pipes and fittings for External work: 125 mm diameter nominal bore.

OD103583/2022-2023:Cutting 125 mm (ID) G.I pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.

OD103582/2022-2023:Welding 125 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8 mm thick MS plates.

OD103588/2022-2023:Fabricating MS/G.I flanges of diameter 125 mm using 8/12 mm thick including cost and conveyance charges , all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete:

OD103589/2022-2023:Jointing of G.I. Flanges, of sizes 125 mm with G.I. pipes in lines and levels, using suitable Nut & Bolts, packing, necessary welding and grinding work, etc. Complete as per directions.

16.42:Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete

Bidder Name

DENNY DANIEL