Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹28.0 LAccepted-AOC | 1st | Accepted-AOC 2ND LOWEST EARNEST MONEY RETURN | |
| 2 | 2nd₹29.3 L+₹54,532 (1.90%)Rejected-Finance MANDI DIVISION NO II HP PWD MANDI | MANDI | HIMACHAL PRADESH | 175001 | 2nd | Rejected-Finance not lowest |
Tender Value
₹27.4 L
EMD Value
₹50,000
Closing Date
8 Aug 2022, 6:00 pmClosed
EE Dharampur
HPPWD Dharampur
Balance work of joinery, masonry and finishing work
2022_PWD_63333_1
pw-dpd-cb-tender 15075-77
Open Tender
Civil Works - Buildings
Item Rate
90 days
dharampur
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,500
Yes
₹50,000
Yes
4 Apr 2023
1 Aug 2022
9 Aug 2022
1 Aug 2022
8 Aug 2022
1 Aug 2022
Amount
Providing and fixing standerd steel section of ISMC &flar doors windows, &clerestory windowa frames manufacture from ISMC 75*40*4 mm &flat 75*4mm welded jamb,lock jamb,beed and if required angle thrashold of mild steel angle 75*40mm welded or rigdly fixed by mechanical means the standerd rolled stell section,joint mitred and welded with 16*3.15mm lugs 10cm long embedded in cement blocks 15*10*10cm size of 1:3:6 split to each jamb including steel butt hinges 2.5mm thck with provision for locking arrangment and shock absorber as specified and applying a coat of approved steel primer after preteament of surfaceincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Provding and fixing standerd steel section of M.S angale and flat iron door,window,clereestory window ,frame manufactured from M.S angle steel section 40*40*5mm,and M.S plate 50*4 thrashold of mild steel 50*25 mm rigidly by mechanical means,lugs with split end tails to each jambs including steel butt hinges 2.5mm thick with provision for locking arrangement and shock absorber as specified and applying acoat of approved steel primer after preteament of the surface including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing form work with steel plates 3.15 thick welded with angle iron frames 30x30x6mm thick so as to give afar finishing i/c shuttering strutting and propping etc.with wooden betten and balles height propping and centring below supprting floor to celling not exceeding 4 mtrss and removal of the same for insitu -reinforced concrete &plain concrete work in:directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Foundation footing and bases of columns etc and nass concrete.
Flat surfaces such as soffits of suspended floors, roofs,landing and the like. Floors etc.upto.
Columns ,pillars, posts and struts square, rectangular or polygonal in plan.
Beam cantilevers girders and lintels girders and lintels side and soffits of beam trenching cantilevers brassiness and links not excluding 1.00mtr in depth
Edges of slabs and breaks in floors and walls under 20cm wide
Ptoviding and laying cement concrete1:4:8(1cement:4sand:8graded stone agg.40mmnominal size and curing complete. Excluding cost of form work in Foundation and plinth.as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying in postion machincal batched and machinc mixed and vibrated mix M-25 including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
All works above plinth level footing
All works above plinth level upto all floor level.
Providing and laying tor steel Fe 500 reinforcment FPR reinforcement cement concrete including bendding, binding shuttering and flacking a postion complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying auto claved aerated cement blocks masonry with 150mm/200mm thick ACC blocks in supper structure above plinth level upto floor V level with RCC bond at all lead and lintle with approved block laying polymear adhesive mortar all complete additional as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying 35 mm flesh door shutter interior grade commercial type core of black bord construction with frame of lirst class hard wood and well matched commercial ply veneening with vertical grains of cross bandas and face veneers on both faces of shutters as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
providing 40*5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 10*10*15cm. 1:3:6 (1cement: 3sand:6graded stone aggregate 40cm nominal size).as directed by Eingeer-in-charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing anodized aluminnum sliding door bolts anodized transparent or dyed to required shade with bolts and nut and screws etc.300*16as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing anodized aluminnum tower bolts(Barrel type) anodized transparent or dyed to required shade with bolts and nut and screws etc.250.10mm as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixinx aluminum handles anodized transparerent or dyed required shades and colour with screws etc. Complete 125mm as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing mil steel plain grills of required pattern wooden for window etc.as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing steel glazed & shutter of 2section with 4mm thick glass pens with putty for door and windowa and cerestory windows, of regd shape &S/C with fitting with necessary screews etc.as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying 25mm thick kota stone 55*55cm minimum size flooring mirrer polished finshed of uniform colour laid on 20mm average thick base of cement mortar 1:4 laid over joints with grey cement slurry mixed with pigment.as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Kota stone in risersof steps skirting ,dodo and pillar laid along with length of item no 15 (0.80+3.20+5.90+14.75)=32.65 as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying viterified tiles in 600*600mm size with absorrption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.30kg/Sqm including qrouting the joints with white cement and matcing pigments etc.complete as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and laying viterified tiles in differnt size (thicknees to be specified by manufacture)with water absorrption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades, in skirting riser of steps. over 12mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.30kg/Sqm including grouting the joint with wite cement & matching pigments etcas directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing on wall face unplasticsed rigid PVC rain water pipe conforming to IS 13592 Type A including jointing with seal ring 110mm diameter.as directed by Eingeer-in-charge. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing andfixing on wall face unplasticised PVC moulded fitting /accessories for unplasticsed rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforing to IS:5382 leaving 10mm gap for thermal expansion.as directed by Eingeer-in-charge.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
coper 110mm
Bend 110mm
Single tee with out door 110*110*110mm
Painting two coat new steel and other metal surface enemal pain brushing to givean even shade including cleaning the surface al dirt,dust and other foreign matter including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Applying priming coat new wood and wood based surface after and inculding prepering the surface by thoroughly cleaning oil grease dirtand other forgn matter sand prepering and knoting including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Painting two coat new wood and wood based surface other and including prepering the suface by thorougly cleaning oil, grease,dirt including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
6mm cement plaster to ceiling with cement mortar 1:4 including entive carriage of metairl with leads & lifts including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
15mm cement plaster in single coat on the roug side of brick /concrete /stone wall for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(one cement:six sand)including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
15mm cement plaster in single coat on tn the fair side of brick /concrete /stone wall for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(one cement:six sand) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Applying birla white wall puty over plaster surface after thoroughly brushing the surface free from mortar drops,dust ,loose material and other foreign matter sand papered smooth to give final matter finish to the surface complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Distmpering (two coats )with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer ofapproved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreignmatter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Finishing wall with acriylic smooth exterior paint of approved brand and manufacture and of required shade on unecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remover all dirt and remains of loose powdered materials including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50gm/lir and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot Tinted ) with silicon additves. New work (Two coat applied @1.43litre/10sqm. over and including priming coat of exterrior applied @ 0.90litre/10sqm including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and moulding to 18mm thick marble stone counters, vanities etc. Including machine polishing to edge to give high gloss finish etc. Complete as per design including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Extra providing opening of required size & shape for wash basion/ kitchen sink in kitchen platform,vanity counterand similar location in marble/Granite/stone work ,ncluding necessary hole for pillar taps etc. Including ,rubbing and polishing of cut edges etc. complete. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Extra for pre finshed nosing in treads of steps of kota stone/ sand stone slab including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Extra for plastering done on moulding , cornice or achivers including neat finish to line and level in one coat. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
providing and fixing 18mm thick gang saw cut ,mirror ploished, premoulded and prepoilished machine cut for kitchen platform vanty counter, window sills ,faciisa and similar locations of required size, approved shade ,colour and texture laid over 20mm thick base cement mortar 1:4 joints treaded with white cement mixed with matching pigment, epoxy touch ups, including rubbing curing ,moulding and polishing to edges to give high gloss finish etc. complete. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing flat pressed 3 layer particle bord medium density extrior grade or graded wood particle board IS :307marked to frame, backing or studding with screews etc. Complete (frames, backing or studding to be paid separtely )18mm thick particle board. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing pre-laminated flat pressed 3layer medium density )particle board or graded wood partcile board IS :3087 marked with one side decortive and other side balancing lamination Grade, Type II exterior grade IS :12823 marked , in shelves with screws and fitting wherever required ,edges to be painted with polyurethane primer (fitting to be paid separately). including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing ISI marked 25mm thick flush door shutters conforming to IS :2202 (part-I) decorative type ,core of black board construction with frame of 1st class hard wood and well mattched teak 3 ply veneeing with vertical grains or cross bands and face veveers on both faces of shutter 25mm thick (for cupboard )including ISI marked nickel plated bright finished M.S piano hinges IS:3818 marked with necessary screws. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing thorating or plaster drip and moulding to RCC chhajja including carriage of material with in all kead and lifts complete in all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Applying cement slurry on RCC slab or cement concrete work using 2.75kg of cement per square meter of floor area befor laying cement concrete flooring including roughening cleaning of the concrete surfface complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Provoiding and laying cement concrete 1:8:16 (one cement:eight sand :sixteen grade stone aggregate 20mm nominal size and curing complete slab and floor excluding the cost of form work screed laid unde flooring including carriage of matrial with in all leads and lifts complete in all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing bright finished M.S hooks and eyes of 200mm size . including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing G.I Union 15mm dia as per PWD specification and as directed by the Engineer-in charge including all leads and lifts . including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing G.I Union 20mm dia as per PWD specification and as directed by the Engineer-in charge including all leads and lifts . including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing 50mm long and 15mm dia CP extension complete in all respect as per PWD specification and as directed by the Engineer-in -charge including all leads and lifts. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing wall mixing faucet for showe and bath hand shower/laboratory sink, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing 0.60mm thick prepainte steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regulur modified polyester (RNP) organic coating coating of 20microns over 5microns primer coating to back coat of olyster of 5 microns over 5microns primer coating i/c fixing with prepainted iorn Jor L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washer complete with all accesoriees as required as per the direction of Engineer-in charge. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Providing and fixing steel work welded in bult up sections,trusses and framed work, including ,cutting ,hoisting fixing in position and applying a priming coat of red lead paint in trusses and trussed brackets and similar work including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Desh Raj
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .