PROVN OF LOW SECURITY WALL FROM BDY PILLAR NO BP 7J TO BP 7L NEAR KABRISTAN HQ COY LINE OF 17 GDRS AND SPECIAL REPAIR TO OTM BLDG NO P 264 JCOS CLUB OF 11 INF DOU UNDER AGE BR II UNDER GE A AHMEDABAD

Amount

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in soft loose soil and getting out complete all as specified and directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft loose soil complete all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and directed.

M & L for Form work to sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces complete all as specified and directed..

M & L for Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete complete all as specified and directed..

M & L for RCC (1:1.5:3) (Nominal mix) as in foundation, including raft, beams, plinth beams bases for columns and mass concrete complete all as specified and directed..

M & L forRCC (1:1.5:3) (nominal mix ) as in columns , pillars, piers, posts and struts etc complete all as specified and directed..

M & L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

M & L for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed.

M&L for angle section fixed independently without connecting plate as in swan neck fencing of Fe-410-w(gde E-250A) complete all as specified and directed.

M & L for brick work with old size bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1 : 4 complete all as specified and directed.

M & L for coping of cement concrete 1:3:6 type C1 20mm graded aggregate on boundary wall rounded or chamfered on edges including formwork complete all as specified and directed..

M & L for rendering 15mm thick on fair faces of brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surface of walls and applying two coats of cement based paint over one coat of alkali resistant priming coat complete all as specified and directed. .

S&F Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or tying at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc complete all as specified and directed.

S&F Concetrina coil 610mm size, securing or tying including provn of MS wire stapples or steel pins etc complete all as specified and directed.

M & L for painting of surfaces of any description wood, steel, iron, concrete, brick, stone, etc.,exceeding 10cm in width or girth painted with black bituminous paint of two coat complete all as specified and directed..

M&L painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down shutter ONLY exc 1.0 sqm and n exc 2.0 sqm each complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium powder coated door single/double shutter with frame size 100 x 44 x 1.98 mm with one or more rebate and shutter pull and push type or side hung type ( with or without shah bar) comprising of top and lock rails of section 115 x 44 x 1.98 mm thick , bottom rail of section 150x44x1.98 mm thick and styles of section 85x 44 x 1.98 mm thick including necessary jointing cleats , glazing clips , rubber packing anodised aluminum beading , screws , anodised aluminum fittings such as floor springs or hinges 100 mm size with hydraulic door closer , handles D type 125 mm , floor door stopper, tower bolt 200 mm sliding door bolt 300 mm or mortise lock , 5 mm thick tinted glass panes top and prelaminated particle board bottom including making good wall surfaces etc., complete all as specified

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S&F powder coated aluminium ventilator partly louvered and partly fixed with and including 4 mm thick frosted glass , 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of frame) complete all as specified and directed..

M&L for grill medium grade of mesh size 75mmx75mm with 6mm square Prelaminated aluminium bars fixed with suitable aluminum frame of size 37x19x2mm complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed & directed

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed in CM 1:6 complete all as specified and directed.

All ss per item No 33 above but on Vertical Surfaces with including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non Skid joint free ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and with backing coat of 10mm thick like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including rounding /moulding of exposed surface .

M&L for pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed CM 1:6 all as Specified.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.(Note : Corrugation colour and shape of sheet shall be approved by GE)

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.

S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed. ( Make:- METROC or METACIL or any other equivalent make as approved by GE.

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

M&L PCC 1:2:4 type B0using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement with 2% Water proofing compund complete all as specified and directed. Note : WPC shall be ,easured and paid sepratly.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 complete all as specified and directed.

Supply only Integral waterproofing compound.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed in walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed in walls and ceilings or laid in floors complete all as specified and directed.

Dismentling water tank exc 500ltr capacity but n. exc 1000ltr capacity and removing rubbish off the premises from site out side of MD land complete all as specified and directed.

Providing and fixing of PVC Water tanks exc 500ltr capacity but n. exc 1000ltr capacity, open or closed, hoisted and fixed in position complete all as specified ad directed.

S&F Ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, 20mm bore, fixed in repair complete all as specified and directed.

S&F in repair stop cock 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair stop cock 15mm cast copper alloy concealed type ,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S& F in repair European Water Closet (pedastal pattern) , white, complete with seat cover and intergral type flush system complete all as specified and directed.

S&F in repair 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete all as specified and directed.

S&F PVC connection 600mm long of dia 15mm complete all as specified and directed.

S&F soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX 100mm complete all as specified and directed.

S&F in repair vitreous china wash basin under counter type 560X470mm, white flat back screwed down for iron pipewaste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed.

Supply & fix health faucet spray type for any WC using flexible 1.5m pipe and hook complete all as specified and directed.

S&F tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete all as specified and directed.

S&F grating PTMT square of size 150mm complete all as specified and directed.

Demolition and breaking up drain pipes ( CI ,salt glazed ware,AC or Reinforced concrete) set in cement mortar internal dia of pipein 100mm

M& L C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall. Fixed in repairs 75mm bore

M& L C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall. Fixed in repairs 100mm bore

M&L CI bends 75mm ( any radius), diminishing pieces or tapers( larger bore measured)Fixed in repairs

M&L CI bends 100mm ( any radius), diminishing pieces or tapers( larger bore measured)Fixed in repairs

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer all as specifed.

M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M & L applying 1 mm thick wall care putty on wall.

M&L for preparation of new plastered surfaces on wall and applying two coats of exterior emulsion paint with anti algal properties(Apex ultima or equivalent) on over one coat of primer on walls complete all as specified and directed.

M&L complete removal of existing treatement and applying two coats of oil bound distemper and a coat of primer, old plastered or un-plastered surfaces on Ceiling complere all as specified and directed by Engr-in-Charge

M&L for complete removal of existing treatment and applying two coats of exterior emulsion paint with anti algal properties(Apex ultima or equivalent) on over one coat of primer on walls complete all as specified and directed.

Dismantling wall & ceiling boards boarding, any description fixed in any position with nails

S&F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, 15mm bore fancy type

S&F aluminium powder coated section size 38 x 38 x 2mm for partition all other members channel tracks including gasket aluminium cleat 6 mm dia rounded bars, 5mm thick tinted glass panes top and prelaminated poarticle board bottoms including aluminium handle hinges and locking arrangement, sliding rail, rollers etc., complete all as specified

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F 2nd hard wood factory made 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed Flush shutters 40mm thickshutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples

M&L surface preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and apply two coat of synthetic enamel paint over one coat pink primer complete all as specified and directed.

S &F in repair vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including flush pipe etc and line concrete bedding compete all as specified.

M&l for preparation of newly plastered surfaces or old existing surface of Ceiling and applying two coats of White wash all as specified

S&F in repair sink made of stailness steel 1mm thick kitchen with plugs, eashers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx 420mm bowl size 10mmx330mmx160mm

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F angle holder, insulated polycarbonate body with back plate complete. Make- Havells Reo / Anchor Penta PC/ SSK/ CONA as approved.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675552 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete. Make- Havells Reo/ Anchor Penta PC/ SSK as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 12 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces all as per Legrand cat ref no 607710 or equivalent in Hager or Schneider as approved.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

S&F In repair energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable, complete all as specified and directed. Fittings shall be of philips cat ref no.SM335B LED 33-5000PSU OD WH or equivalent in Havells, Pluto Neo Panel 2x2 OR equivalent in Wipro as approved complete.

Led Wall Washer rounded corners and white color, throw of the light in both the directions IP 44, aluminium body with 7 watt White led lamp and base including connection and fixing on wall as directed. Make Phili[ps, Model No: 34153 or equivalent in C&S Elect or Wipro as approved.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 12 W spiral CFL( B-22) base/ 10W LED bulb as directed. Make- Havells cat ref no- LHFOFWE1TZ1W012 or equivalent in Philips/Bajaj.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame all as per Legrand Mylinc cat ref no. 675558, 689009, 675564 & 675584 or eqivalent in Schneider Zencelo or MK Blenze as approved.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp. Make - Legrand DX3 cat ref no. 408587 to 408595 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

Four pole 63 amp. Make-Legrand cat ref no. 408702 or equivalent in Schneider or Hager as approved.

S&F ventilating fan single phase, 230 volts, 250 mm sweep plastic body with mounting rings all as per Havells cat ref no. Ventil Air-DX or equivalent in Almonard / CG as approved.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed as per Bajaj cat Ref no. BCLST 20 W LED I code 169829 or equivalent in Philips or Wipro as approved.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric connection and keeping in safe custody for repair.

Hanging only ceiling fan and connecting up including provision of cable ceiling rose or connector to fans as directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully electric meters, any type upto 40 amps capacity after disconnecting and depositing in MES store yard complete.

S&F galvanized unwelded pressed steel terminal boxes concealed in wall of thickness 1.2 mm covered with phenolic laminated white sheet cover 3 mm thick in renewal of wooden meter boards of size 250mm x 300mm x 60mm deep for fixing energy meters complete

S&F fully transparent meter box suitable for energy meter made of polycarbonate/ high grade engineering plastic to permit clear view of display and can be sealed in such way that the entire meter is accessible only after breaking the seal complete.

RISING ELECTRICALS

GIRNAR CONSTRUCTION

Tech Serve Solutions