Repair and Maintenance Works for Nalej Minor Irrigation Scheme - Canal Network, Taluka: Chhota Udepur, Dist: Chhota Udepur

Bill of Quantities

SR NO ITEM QUANTITY UNIT AMOUNT (INR)

1 Clearing the shrubs, like akadas,

weeds and other vegetables

including depositing the same

outside and burning etc. complete 7.62 km 5776.00

from canal bed, top and both slopes

of the banks, for canal with

discharge. Below 20 cusecs.

2 Cutting down the trees of different

girths, (at 45 cm above G.L.)

including removing & grubbing

roots below ground level within the

canal boundary including stacking

the wood outside the canal boundary

as directed etc. complete.

(a) Girth above 0.50 & upto 1.00 m

3 Clearing the silt from the

canal/drain bed by a digging the

same to the required bed level and

gradient including depositing the

excavated earth regularly in spoil

bank for utilizing the same 718.10 Cum 173.30

preparing the banks after breaking

clods as and where directed for all

leads and lifts.

For Canals Below 20 Cusec. & 0 to

4 Excavation of canal in all sorts of

soil including yellow, sand and

gravely soils and murrum including

depositing the excavated stuff in

uniform layers in banks as and

where directed including dressing 4212.95 Cum 259.90

the section etc. complete for lead

upto 50 m and lift for depth for

cutting as under. (MANUALLY)

For Canals Between 5 to 50 Cusec.

& 0 to 1.5 m lift.

5 Dismantling the existing stone

masonry including sorting out and

stacking the useful material and

removing the debries and making

good the damages etc. complete as

directed. In Cement Mortar

6 Dismantling the existing R.C.C.

Pipes including sorting out and

stacking of the useful materials of the

following diameters including

refilling the trenches etc. complete

as directed. (e) 450 -600MM dia

7 Dismantalling the C.C. lining

including including disposing off the

dismentalled materials as directed

etc. complete. (a)7.50 cm thick

8 Earthwork/Back filling with selected

earth including watering

ramming,Compaction with 12288.59 Cum 144.50

pnuematic temping with all lead and

all lift etc complete.

9 Trimming of the canal section

manually for preparing sub grade

for laying cement concrete lining in

all sorts of soil and murrum including

watering and compacting bed etc.

10 Providing and laying

plain/reinforced cement concrete

lining of M 15 (MSA 20 mm) in bed,

side slopes and curvature including

batching, mixing, transporting,

placing, vibrating, smooth finishing,

curing including dewatering where

required.(MACHINERY BASED by

"FLORI" - WITHOUT PAVER WATER

11 Providing groove and filling

expansion joint of size 12 mm wide

and 25 mm deep in canal lining

during construction with two coats of 3049.39 Rmt 34.70

primer and filled with bituminious

and fine sand in proportion of 2:1, as

directed etc. complete.

12 Providing & Placing in position

reinforcement bars including

cutting, bending, welding joints

where necessary, hooking etc.

complete as per drawing for all lead

and lifts. TMT / CRS (FE 500 D)

13 Providing following types of

Kundis/Airvents/ outlets as per

drawing & designs, duly completed

& tested curing etc complete.

Outlets ( Masonry chamber & 9 "

outlet pipe)(i) (1 x 1 x 1) m

14 Reparing of steel gate including

providing basic steel material; M.S.

Shaft plate, angles, channels etc. 2160.06 Kg 127.20

incl. fabriction transporting to site &

erection and painting etc. complete.

15 Excavation for foundation in

overburden in all sorts of soil hard

murrum , gravel etc including

shoring , strutting and depositing the

excavated stuff in regular stacks or

layers with lead up to 500 mtr and all

lifts. (By Machinery) including

Excavation for foundation trenches

in all sorts of soil sand clay, hard

clay, soft murrum including shoring,

strutting and depositing the

excavated stuff, refilling the

remaining excavated trenches upto

G.L. as and where directed within a

lead of 50 m. etc. complete as

(a) Upto 1.50 m depth

17 Providing & Laying in position

"NOMINAL MIX" cement concrete

using cement, sand and crushed

aggregate by mass and machine mix

for C.C./R.C.C work incl. necessary

formworks centering, scaffolding,

compaction by vibrator, curing as

directed with all lead & lift etc

complete Without Dewatering and

excluding cost of steel

reinforcement. (d) C. C. Nominal

Mix, M-15 and MSA-20 mm

18 Providing & Laying in position

"NOMINAL MIX" cement concrete

using cement, sand and crushed

aggregate by mass and machine mix

for C.C./R.C.C work incl. necessary

formworks centering, scaffolding,

compaction by vibrator, curing as

directed with all lead & lift etc

complete Without Dewatering and

excluding cost of steel

reinforcement. (f) C. C. Nominal

Mix, M-20 and MSA-20 mm

19 Providing and fixing in position (

different diameter ) I.S.,NP-3 class

reinforced pipe with caulking the

joints with cement mortar 1:1

proportion,using jute string soaked

in cement slurry, finishing joints and

laying pipes to the designed grade

and levels, curing etc. complete for

all leads and lifts. NP-3 class 900mm

20 Providing and fixing in position (

different diameter ) I.S.,NP-3 class

reinforced pipe with caulking the

joints with cement mortar 1:1

proportion,using jute string soaked

in cement slurry, finishing joints and

laying pipes to the designed grade

and levels, curing etc. complete for

all leads and lifts. NP-3 class 450 mm

21 Providing and fixing steel grill over

canal syphon well as directed etc. 2080.40 Kg 67.90

complete as per drawing.

22 Providing and fixing in position

mm wide steps ( for ladder) of 28mm

diameter bars at a spacing of 30 cm

c/c with M.S. angle frame of 40x40x6 533.00 No. 386.70

mm size including painting the same

with two coats of oil paint etc.

Total Cost (Rs.)

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my

/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Contractor Executive Engineer