CONSTRUCTION OF WARD OFFICE BUILDING AT F.P.NO. 158 , T.P.S.NO. 65 - SAIJPUR BOGHA IN THKKAR NAGAR WARD, NOTH ZONE, AHMEDABAD.

Name of Work:- CONSTRUCTION OF WARD OFFICE BUILDING AT F.P.NO. 158

T.P.S.NO. 65 - SAIJPUR BOGHA IN THKKAR NAGAR WARD, NOTH

ZONE, AHMEDABAD

Bill of Quantities

Sr. No. Qty Items Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of

servicable materials and disposal of

a 12.00 unservicable materials with all lead 1047.38 Cu.M.

and lift.Removal Of Existing Building

Foundation and Super Structure If

Demolition of Brick work and stone

masonry including stacking of

serviceable materials and disposal of

b 14.00 unserviceable materials with all lead 544.95 Cu.M.

and lift.(ii) In Cement Mortar.Removal

Of Existing Building Foundation and

Super Structure If Any.

Dismentaling of sheet roofing

including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable

materials and disposal of

unserviceable materials with all lead

i 5.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including

d 1000.00 distempering and stacking the 3.63 Kg.

materials with all lead and lift.

Dismentling doors, windows,

ventilators etc. (wood or steel)

shutters including chowkhats

e 2.00 architraves, hold fasts and other 185.85 Each

attachment etc. complete and

stacking them with in all lead and lift.

(i)Notexceeding 3 Sq.M. in area.

Removing & Scrapping of Old

deteriorated Plaster of any thickness

f 63.00 from Masonary / R.C.C. member 19.38 Sq.M.

including stacking of serviceable

material & disposal of un serviceable

from site of work with all lead & lift.

Dismentaling any type tiled of stone

floors laid in mortar including stacking

g 45.00 of serviceable materilas and disposal 47.25 Sq.M.

of unserviceable materials with all

Excavation for foundation including

sorting out stacking of useful material

2 & disposing of excavated stuff upto

mt. lead. Loose & Soft soil.Excexuted

With Mechanical Effort

a 1545.00 up to 1.5 mt. depth 115.92 Cu.M.

c 1725.00 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 296.00 above 5.00 mt. depth 162.02 Cu.M.

Add extra for Disposing off the

e 50.00 excavated stuff of above items for 17.28 Cu.M.

lead of (A) 50 m to 100 m

Add extra for Disposing off the

f 50.00 excavated stuff of above items for 34.56 Cu.M.

lead of (B) 100 m to 200 m

Add extra for Disposing off the

g 50.00 excavated stuff of above items for 51.84 Cu.M.

lead of (C) 200 m to 300 m

Add extra for Disposing off the

h 50.00 excavated stuff of above items for 76.80 Cu.M.

lead of (D) 300 m to 400 m

Add extra for Disposing off the

i 50.00 excavated stuff of above items for 128.00 Cu.M.

lead of (E) 400 m to 500 m

Providing and installing cast in situ

single under reamed piles of specified

diameter and length below pile cap,

excluding the cost of Concrete, steel

reinforcement but including the cost of

boring with bentonite solution and the

length of the pile to be embedded in

pile cap etc. all complete. (Length of

pile for payment shall be measured

upto to the bottom of pile cap) :

i 10.00 400 mm dia. Piles 644.63 Rmt.

ii 20.00 450 mm dia. Piles 705.03 Rmt.

Extra over single under ream for

providing additional bulbs in under

reamed piles, under specified

diameter excluding the cost of

Concrete, steel reinforcement (only

the nos. of extra bulbs are to be paid).

t 1.00 400 mm dia. Piles 813.05 Each

ii 2.00 450 mm dia. Piles 1103.43 Each

Provdg. & laying cement concrete

1:5:10 (1 cement : 5 course sand :

hand broken aggregates 40 mm

nominal size) and curing complete,

excluding cost of form work in

foundation & Plinth.

Provdg. & laying cement concrete

1:3:6 (1 cement : 3 coarse sand :

3b hand broken stone aggregates 40 mm

nominal size) and curing complete

excluding cost of form work in

284.00 (A) Foundation and plinth 2976.00 Cu.M.

Supplying of graded hand brocken

3c 136.00 stone size of 90 mm to 127 mm at site 983.93 Cu.M.

(Rubble or Spoul)

Labour charges for spreading the

spouls 90 mm to 127 mm thick layer

good earth filling in voids correcting

3d 592.00 the grade & camber comp. with 26.79 Sq.mt.

rolling, watering, incl. preparing

thesurface by brushing for removing

all loose or dirts ect.comp.

Provdg. & laying cement concrete

1:4:8 (1 cement : 4 coarse sand :

hand broken stone aggregates 40 mm

nominal size) and curing complete

excluding cost of form work in

foundation& plinth.

Filling available excavated earth

(excluding rock) in trenches, plinth,

sides of foundations etc. in layers not

exceeding 20 cm. in depth

consolidation each deposited layer by

ramming and watering.

Conveyance charges of earth lime,

6 murrum, building rubbish, manure,

garbage, sludge, excavated rock, fly

ash, aggregate of any kind etc. comp.

a 200.00 Conveyance charges upto 1 km 320.20 Cmt

b 200.00 Conveyance charges upto 2 km 347.73 Cmt

c 7500.00 Conveyance charges upto 5 km 408.41 Cmt

d 7500.00 Extra For Lead on Above Item Above 9.26 Cmt

5 km & upto 6 km

e 7500.00 Extra For Lead on Above Item Above 9.26 Cmt

6 km & upto 7 km

f 7500.00 Extra For Lead on Above Item Above 9.26 Cmt

7 km & upto 8 km

g 7500.00 Extra For Lead on Above Item Above 9.26 Cmt

8 km & upto 9 km

Extra For Lead on Above Item Above

Filling in plinth with sand under floors

including watering, ramming,

consolidating, compacting and

dressing etc. completed.

Filling in foundation and plinth with

murrum or selected soil in layers of

7b 150.00 cm. thickness including watering, 286.20 Cmt

ramming and consolidating etc.

Brick work using common burnt clay

building bricks having crushing

8 strength not less than 35 kg/Sq. cm. in

cement mortar 1:6 (1 cement : 6 fine

sand) conventional brick

a 88.00 (a) in foundation & Plinth 3981.21 Cu.M.

b 288.00 Super structure Upto Floor Two Level 4253.46 Cu.M.

Super structure Above Floor Two

I.Half brick masonry in common burnt

clay building bricks having crushing

9 strength note less than 35 Kg/Sq. Cm.

in cement mortar 1:4 (1 cement :

coarse sand) using conventional brick

in Super structure upto floor Four level

a 308.00 All Floor Level 646.70 Sq.M.

Providing and laying controlled

cement concrete of M-25 Grade and

curing complete, Excluding the cost of

10.1 form work, Scaffolding, cost of

reinforcement for reinforced concrete

work For any Height up to any

Foundations,Raft,Footings,Mass

b1 2.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket,

c1 16.00 Stair Case & Landing, Coping ,Slab, 4496.07 Cu.M.

balcony, weather shed, loft , any

cantilever etc All Floor

d1 13.00 Columns,Pillars, posts and struts at 4593.91 Cu.M.

Providing and laying controlled

cement concrete of M-20 Grade and

curing complete, Excluding the cost of

10.2 form work, Scaffolding, cost of

reinforcement for reinforced concrete

work For any Height up to Floor Four

Foundations,Raft,Footings,Mass

Tie Beam , Lintel , Beam- Bracket

Coping ,landing, Slab, balcony,

weather shed, loft , any cantilever etc

c1 2.00 Column at All Floor 4558.20 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready

Mixed M250 grade concrete for

reinforced cement conctere work

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work in transit

mixer for all lead having continuous

agitated mixer, manufactured as per

mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

10.3 1393.00 transit mixer to site of laying with all 4853.56 Cu.M.

lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of

admixtures in recommended

proportions as per IS: 9103 to

accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction

of the Engineer - in charge. Without

Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 450 kg )

Providing and laying in position Ready

Mixed M200 grade concrete for

reinforced cement conctere work

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work in transit

mixer for all lead having continuous

agitated mixer, manufactured as per

mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

10.4 3.00 transit mixer to site of laying with all 4793.10 Cu.M.

lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of

admixtures in recommended

proportions as per IS: 9103 to

accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction

of the Engineer - in charge. Without

Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 400 kg )

Drilling suitable holes in reinforced or

plain cement concrete with power

driven drill machine to a minimum

depth of 80mm upto 250mm in RCC

beams, lintels, columns and slabs to

10.5 introduce steel bars for

sunshades/balconies including fixing

the steel bars in position using Hilti

Chemical HY200-R but excluding the

cost of reinforcement, all complete as

per direction of Engineer-In-Charge.

a 140.00 8 mm Dia in 80 mm Deep & 12 mm 183.52 Each

b 1100.00 10 mm Dia in 100 mm Deep & 14 mm 263.66 Each

c 1100.00 12 mm Dia in 120 mm Deep & 16 mm 343.80 Each

d 120.00 16 mm Dia in 160 mm Deep & 20 mm 608.63 Each

e 45.00 20 mm Dia in 200 mm Deep & 25 mm 1024.44 Each

f 20.00 25 mm Dia in 250 mm Deep & 32 mm 1938.54 Each

Providing and laying controlled

cement concrete 1:2:4( 1cement :

coarse sand : 4 Graded stone

11 aggregate 20 mm nominal size ) and

curing complete, Excluding the cost of

form work and reinforcement for

reinforced concrete work in:

Foundations, footings, base of

a 1.00 columns,grade slab and mass 3923.53 Cu.M.

slab, landing shelves, Balconies,

b 1.00 lintels, beams, girders, and cantilever, 4012.47 Cu.M.

up to aany floor level.

P/A Trimix with dewatering machine

c 984.00 and floater machine on constructed 54.00 Sqmtr

R.C.C. work incl. cost of machine and

labour etc. comp. as directed.

Making 15 mm Groove in R.C.C work

d 320.00 on road and filling it with poly sulfied 30.00 Rmt

selant and finished it good incl. all

labour charges etc. comp. as directed

Providing and laying and fixing 25 mm

thick expansion joint by hydrocell semi

e 26.00 rigid UV resistance with high 738.13 Sqmt

performance laminated closed cell

polythene foam joint filler in sheet

foam as directed, etc. complete.

Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering,

strutting and propping etc. height of

12 propping and centering below

supporting floor to celling not

exceeding 4 M & removal of the same

for in situ reinforced or plain concrete

a 461.00 (A) Foundation, footings, bases of 171.68 Smt

columns etc. and mass concrete.

b 1917.00 (B) Flat surface such as soffits of 252.00 Smt

slabs, landing and the like

c 2153.00 (C) Vertical surfaces such as walls 229.95 Smt

(any thickness) partitions.

(D) Columns, pillars, posts & struts.

d 1483.00 (1) Square, rectangular, polygonal in 297.68 Smt

e 20.00 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam,

f 2655.00 haunchings cantilevers, girders, 192.15 Smt

bressumers, Coping and lintels not

exceeding 1 M in depth.

(2) Sides and soffits of beam,

haunchings cantilevers, girders,

bressumers and lintels exceeding 1 M

h 164.00 (L) chullah hoops, weather sheds, 155.78 Smt

chhajas, carbels etc including edges.

(M) Staircase with-sloping or stepped

i 200.00 soffits incl. risers & strings excluding 242.55 Smt

Extra for additional height of propping

and centering where the height of

propping and centering exceeds 4 .O

M between supporting floor to ceiling

including temporary brick or stone

pillars for supporting as required.

(i)Height more than 4.0 M.and upto

Extra for additional height of propping

and centering where the height of

propping and centering exceeds 4 .O

M between supporting floor to ceiling

including temporary brick or stone

pillars for supporting as required.

(i)Height more than 6.0 M.and upto

Providing T.M.T Fe 500D bar

reinforcement for R.C.C. work

13 including bending, binding and placing

in position complete up to any floor

a 173770.00 All Floor Level 75.46 Kg.

Providing and laying polished Kota

stone slab (Polished / River Finish,

Green colour ) flooring over 20 mm.

(average) thick base of cement mortar

1:6 (1 cement : 6 coarse sand) or lime

mortar 1:1.5 laid over and joined with

grey cement slurry including rubbing

and polishing complete.25 mm th.

Providing and laying polished Kota

stone slab 25 mm. thick in Platform

,Riser of Stair , Skirting, Tread , dado

and pillars laid on 10 mm. thick

15 45.00 cement mortar 1:3 (1 cement : 3 1176.03 Sq.M.

coarse sand) jointed with grey cement

slurry including rubbing and polishing

and MAking groove where it is

Required etc. compl

Providing and laying white/Colur

glazed tiles 6 mm thick in flooring

16 3.00 treads of steps and landing laid on a 908.17 Sq. M.

bed of 12 mm thick cement mortar 1:3

(1 cement : 3 coarse sand) finished

with flush pointing in white cement.

Providing and layingWhite / Colour

glazed tiles of size 600 mmx300mm x

8 mm / 300 mmx 450mm x 8 mm in

17 275.00 skirting, risers of steps, Floor and 1426.95 Sq. M.

dedo on 10 mm. thick cement plaster

1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry.

Providing and laying marble stone

slab flooring over 20 mm. (Average)

base of cement mortar 1:6 (1 cement:

6 coarse sand) or L.M. 1:1.5 laid and

jointed with grey cement slurry

including rubbing and polishing

complete: (A) Marble slab 25 mm.

Providing and laying Vitrified tiles 8 to

10 mm thick , 24'' x 24'' in flooring

19a 850.00 treads of steps and landing laid on a 1062.50 Sq. M.

bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to

10 mm thick , 24'' x 24'' in skrting

risers of steps and dedo on 10mm

thick cement plaster 1:3 (1cement : 3-

coarse sand) and jointed with white

P & L 24" x 24" vitrified 8 mm thick tile

20 mm (average) base of cement

mortar 1:6 ( 1cement: 6 coarse sand)

on new surface or fixing on existing

19c 100.00 flooring by adhesive material including 1383.99 Sq.M.

dismentaling of existing flooring and

jointed with color cement slurry

including finised with flush pointing &

cleaning the surface etc. complete for

Providing and laying Ceramics tiles

to 8 mm thick in flooring, treads of

steps, landing and dedo on 12 mm.

thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white

Providing & Laying 18 mm thick Mirror

polish granite For flooring , counter

stair -riser , tread , skirting , dedo

Jambs etc. machine cut or chiselled

21 520.00 on bed of cement mortar 1:1 pointing 2385.71 Sq. M.

with neat cement slurry incl. moulding,

Making grooves where it is required

etc. comp. as per instruction of

engineer in charge.

Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat on fair

side of brick / concrete walls for

interior plastering upto any Floor level

and finished even and smooth in

i 3793.00 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat

plastering on ceilings, Beam side and

sofits of stairs upto any Floor level

and finished even and smooth in

i 2071.00 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken

mesh jali with nails & then application

c 644.00 of 15 mm plaster on R.C.C. & 315.15 Sq.mt

masonary joints as per dir. of engg. In

Providing and mixing water proofing Per Bag

materials in cement mortar in of 50 Kg

d 200.00 proportion recommended by the 48.77

manufacturer. etc. comp. as per Cement

instruction of engineer in charge.

Providing 20 mm th. Double coat

Sand face / Mala Cement Plaster on

Walls upto any Height Above Ground

level consisting of 12 mm th. Backing

coat of C.M. 1:3 ( 1 cement : 3 Ssand

) & 8 mm th. Finishing coat of C.M.

1:1 ( 1 cement : 1 sand ) ets.

White / Color washing with lime on

undecorated wall surfaces (two coats)

to give an even shade including

thoroughly brooming the surface to

remove all dirt, dust mortar drops and

other foreign matter.

Providing & Applying 3 mm thick

External Wall Rustic Type Texture as

24b 950.00 per Design & Make as Approved by 424.92 Sq.M.

Consultants / Engineer in Charge.

Work Includes All Necessary

Scaffolding Work upto Any Height.

Finishing walls with Acrylic Smooth

exterior paint of required shade :New

work (Two or more coat applied @

1.67 ltr/10 sqm over and including

priming coat of exterior primer applied

P./L. METALIC HERITAGE

SURFACE TEXTURE

Providing and fixing of HERITAGE

textured homogeneous wall finishing

system from BAKELITE HYLAM LTD

or equivalent make consisting of a two

component system of (25 kgs per

Pack) made of 92% silica particles

coated with fade resistant pigments,

100% acrylic polymer bonding agent

(5kgs per pack) with the applied

24d 25.00 thickness of the coating being 637.38 Sq.M.

between 0.8mm-1.2mm to be applied

on acured, smooth level plaster

without keying, as per the

shades/combinations approved, as

per the manufacturer directions, for

usages, tobe applied by an approved

applicator of the manufacturer, as per

the directions / supervision of the

engineers in charge, all complete.

Includes All Necessary Scaffolding

Work upto Any Height.

Providing and Fixing 18 mm thick

concrete base exposed brick cladding

including surface waterproffing,

polymer modified tile adhesive and

polymer modifies tile grout ( grey /

white) with neccesary scafolding etc

compl. As per direction of engg.

Wall Painting (two coats) with plastic

emulsion / Oil paint of approved brand

and manufacture and of shade

required on undecorated wall surfaces

to give an even shade, over and

including a priming coat with alkali

25a 4500.00 resistance primer of approved brand 78.44 Sq.M.

and manufacture after thoroughly

brushing the surface free from mortar

droppings, and other foreign matter

and also including preparing the

surface even and sand -papered

Extra over above item for every

subsequent coat of of wall painting

with plastic emulsion / Oil paint of

approved brand.

Applying two coats of Birla (white

cement based) or Asian (acrylic lapy-

putty) or equivalent & two coats of

primer of approved brand and

manufacture on new wall surface to

give an even shade including

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and sand papered

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

2.0 mt.,refilling, trasporting the pipe to

work site, unloading, lowering in

trenches, laying and jointing the pipes

26 in c.m. 1:1 incl. all jointing materials

such as cement, sand, hemp, bitumen

as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire

incl. watering trenches, spreading

and carting away of surplus earth

within 100 mt.lead as dire. etc. comp.

a 30.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

2.0 mt.,refilling, trasporting the pipe to

work site, unloading, lowering in

trenches, laying and jointing the pipes

in c.m. 1:1 incl. all jointing materials

such as cement, sand, hemp, bitumen

as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire

incl. watering trenches, spreading

and carting away of surplus earth

within 100 mt.lead as dire. etc. comp.

b 25.00 15 cm dia. 288.23 Rmt

c 15.00 10 cm dia. 211.05 Rmt

Constructing brick masonry chamber

for under ground C.I. Inspection

chamber and bends with bricks having

croshing strength not less than 35 Kg.

Cm2 in C.M. 1:5 C.I. cover with frame

(Lightduty) 455mm x 610 mm intenal

dimensions total weight of cover with

frame to be not less than 38 Kg. (Wt.

of cover 23Kg.) and Wt. of frame

27 8.00 15Kg.) (R.C.C.top slab with 1:2:4 mix 3863.85 No.

(1-cement:2-coarse sand:4-graded

stone aggregate 20mm size)

foundation concrete 1:5:10 inside

plaster 15 mm thick with cement

mortar 1:3 finished smooth with a

floating coat of neat cement on walls

and bed concrete etc. complete.(i)

Inside dimensions 455 mm x 610 mm

and up to 850 mm deep

Constructing Manhole with R.C.C. top

slab in 1:2:4mix (1-cement: 2-coarse

sand:4-graded stone aggregate

mm nominal size) foundation concrete

1:3:6 mix (1-cement:3-coarse sand:6-

Brick bats 40+50mm size) inside

plastering 15mm thick with Cement

Mortar 1:5 (1-Cement:5-coarse sand)

finished with a floating coat of neat

cement and making channels in

cement concrete 1:2:4 mix (1-

Cement:2 -Coarse sand:4-stone

aggregate 20 mm nominal size)

finished smooth complete including

curing and festing (i) Inside size

900mm x 1200mm and up to 1.5M.

deep including C.I. cover with frame

size 560 mm diameter total weight of

cover and frame to be not less than

128kgs. (Wt. of cover 64Kg. and Wt.

of frame 64Kg.) (A) With 230 mm thick

walls of brick masonry using brick

having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5

(1-Cement: 5-Coarse sand) (2)B type

depth up to 1.50 Metre

Providing and fixing white vitreous

china flat back or wall corner type

lipped front urinal basin of

340x280x470 mm sizes respectively

with standard flush pipe, Waster Pipe,

29a 12.00 Waste Coupling, PVc Connection and 3344.35 No.

G.I clamps complete, including

painting of fittings and brackets,

cutting and making good the walls and

floors wherever required : Cera Model

No. S4020103 or Equivalent

Providing and Fixing of C.P. Brass

BIB Cock of 15 mm Dia of Jaquar

b 40.00 make florentine series model no. 1564.17 No.

5047n or equivalent make with all

necessary fittings. as approved by

Engineer - in - charge.,

Providing and fixing brass screw down

Angle stop tap.(A) 15mm dia. Of

c 40.00 Jaquar make florentine series 1160.57 No.

modelno. 5053n or equivalent make

with all necessary fittings. as

approved by Engineer - in - charge.,

Providing and fixing C.P. brass

d 1.00 shower rose with 15mm or 20mm inlet 279.37 No.

Shower Arm.(A) 100mm dia. Each

Provding and Fixing of autoclosing

pressmatic pillar cock / bib cock with

all necessary fittings of Polished

e 20.00 Bright Chrome Finish of Jaquar make 3280.52 No.

model no. 031L65 or equivalent make

as approved by Engineer in Charge.

Rate including of cost of labour,

material etc. in complete manner.

Providing and Fixing of C.P. Brass

Two Way Bib Cock of 15 mm Dia of

Jaquar make model no. 041kn or

equivalent make approved make with

all necessary fittings. as approved by

Engineer - in - charge.,

Providing and Fixing of C.P. Brass

urinal Valve Auto Closing System

With Full Built in Control Cock & Wall

Flange of 15 mm Dia of Jaquar make

model no. 077 or equivalent make

approved make with all necessary

fittings. as approved by Engineer - in -

Provdg. & laying S.W. Gully trap with

C.I. garting brick masonry chamber &

30 8.00 water tight C.I. cover with frame of 1234.57 No.

300 mm x 300 mm size ( inside) with

standard weight. sqare mouth trap

size 150 x100 mm P trap

Providing erecting and fixing double

coated ISI water tank of required

31 2000.00 capacity each with all necessary 3.91 Litre

fittings and connection etc. complete

Extra rate over item of excavation of

earth for excavation of asphalt

pavement/RCC of thickness up to

0.20 meter including demolishing the

asphalt carpet, metal, soiling / cutting

Reinforcement etc.comp. with

stacking the material as directed.-up

to 0.20 meter thickness

Providing and fixing PVC SWR Nahni

trap IS 14735 for drain - 100 mm

diameter with jali of the following

33 30.00 nominal diameter of self cleansing 565.43 No.

design with C.I scread down or hinged

grating including the cost of cutting

and making good the walls.

Provdg. And fixing Concealed / Open

to wall, ceiling & floor in true line and

level UPVC pipe Schedule- 40 of

make as approved by engg. incharge.

pipe shall be fix on wall with the help

34a of clamp at every twi meter center to

center of shall be concealed as

directed in cluding neccesarry fitting

etc. in cluding testing of pipe and

jointd and fixing the same with

adhesive solvent , including cost of all

materials of following nominal bore

iii 30.00 32 mm 117.97 Rmt

Providing and fixing concealed center

point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for

potable water of following dia. nominal

bore tube fittings and clamps including

making good the wall, ceiling and floor

iii 5.00 25 mm 247.25 Rmt

Provdg. And fixing to wall ,ceiling and

floor 10.00 kg. F/Sq.Cm2 working

pressure polythelene pipes of the

following outside diameter, low,

density, complete with special flange

compression type fittings, wall clips

etc. making good wall ceiling and

b 75.00 (A) 75mm dia 274.68 Rmt

Providing and fixing water closet

squatting Pan ( Indian type W.C. Pan)

36 6.00 size 580mm (A)VitreousChina. (I)Long 1351.49 No.

pattern = White colour with Trap and

Pair of Foot Rest

Providing and fixing white vitreous

china extended wall mounting water

37a 17.00 closet of Cera Make S1043101 Carat 12613.27 No.

Model Or Equivalent Model With EWC

Soft Close Seat Cover, Chair Bracket,

nuts, bolts and gasket etc complete.

Providing and Fixing of C.P. Brass

Flush Cock / Concealed Cock of

mm Dia of Jaquar make model no.

081 or equivalent and Outer Body of

Jaquar make model no. 5083KPM or

equivalent approved make with all

necessary fittings. as approved by

Engineer - in - charge.,

Providing and fixing Health Faucet of

Jaquar make model no. 573 oe

c 17.00 equivalent make as approved by 1543.36 No.

engg. In charge with flexible tube upto

1 metre long etc. complete.

Providing and fixing 24"x18"x8"

Carysil Elegance or Equivalent Make

of Single Bowl Sink S.S. Matt Finish

With Waste Coupling, Waste Pipe,etc.

cutting and making good the walls

wherever required.

Providing and fixing Under counter

Wash basine including 15 mm C.P.

Brass Pillar tap, 32 mm C.P. Brass

Waste of Standard make, Cutting &

b 8.00 Making good the wall / granite 6641.14 No.

Wherever Required in White Color :

Model S2030101 of Cera Clair Series

or Equivalent make Wash basine of

size : 520x450 mm

Providing and fixing Wall Hung wash

basin Including 32 mm C.P. brass

waste of standard pattern, cutting and

c 5.00 making good the walls / granite 3825.20 No.

wherever require:In White Color :

Cera Cadal Or Equivalent Make Wash

basin of size 515 x 410 mm

Provdg. & fixing 600mm x 450 mm

Bevelled edge mirror of superior glass

mounted of .6 mm th. A.C. sheet or

plywood sheet and fixed to wooden

pluge with C.P. brass screws and

Providing and fixing mirror of superior

glass (of approved quality) and of

required shape and size with plastic

b 1.00 moulded frame of approved make and 1773.73 No.

shade with 6 mm thick hard board

backing : Rectangular shape

Provdg. & fixing C.P..Brass towal rail

40 10.00 complete with C.P. brass brackets 597.22 No.

fixed to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size)

Providing and fixing ball valve (brass)

41 of approved quality, High or low

pressure, with plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 15.00 25 mm dia 1552.93 No.

iv 8.00 40 mm dia 3312.60 No.

Providing and fixing Full Way valve

42a (HEX) with wheel of approved quality

i 2.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 2.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 6.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 8.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 2.00 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass

43a 1.00 Pillar Cock of 15 mm Dia of approved 1725.21 No.

make with all necessary fittings. as

approved by Engineer - in - charge.,

Providing fixing of SS grab bar with all

b 3.00 hardwares for Physically Handicap 1937.24 No.

Providing and laying integral cement

based water proofing treatment

including preparation of surface as

required for treatment of roofs,

balconies, terraces etc consisting of

following operations:

(a) Applying a slurry coat of neat

cement using 2.75 kg/sqm of cement

admixed with water proofing

compound conforming to IS. 2645 and

approved by Engineer-in-charge over

the RCC slab including adjoining walls

upto 300 mm height including

cleaning the surface before treatment.

(b) Laying brick bats with mortar using

broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar

1:5 (1 cement : 5 coarse sand)

admixed with water proofing

compound conforming to IS :

and approved by Engineer-in-charge

over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing

compound conforming to IS :

and approved by Engineer-in-charge

to required slope and treating similarly

the adjoining walls upto 300 mm

height including rounding of junctions

of walls and slabs.

(c) After two days of proper curing

applying a second coat of cement

slurry using 2.75 kg/ sqm of cement

admixed with water proofing

compound conforming to IS :

and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm

thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand)

admixed with water proofing

compound conforming to IS :

and approved by Engineerin- charge

(e) The whole terrace so finished shall

be flooded with water for a minimum

period of two weeks for curing and for

final test.“All above operations to be

done in order and as directed and

specified by the Engineer-in-Charge

:and shall be guaranteed for minimum

period of 10 years after handing over

the completed building by the main

contractor to be finished as directed.

Stamp paper guarantee 10 years to

be furnished before receiving any

payment from the client.

With average thickness of 120 mm

and minimum thickness at khurra as

Providing and laying broken chine

mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3

b 450.00 to plain or slope and to be tempered 739.89 Sq. M.

to bring mortar creme out upto surface

using white cement including rounding

off junctions and extending them upto

15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Providing and applying fibre

reinforced elastomeric liquid water

proofing membrane with resilient

acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top

of concrete roof in three coats @10.76

litre/ 10 sqm. One coat of self-priming

of elastomeric waterproofing liquid

(dilution with water in the ratio of 3:1)

c 360.00 and two coats of undiluted elastomeric 562.40 Sq. M.

waterproofing liquid (dry film thickness

of complete application/system not

less than 500 microns). The operation

shall be carried out after scrapping

and properly cleaning the surface to

remove loose particles with wire

brushes, complete in all respect as

per the direction of Engineer-in-

Filling in Sunken Portion with good

Quality Aerated light weight concrete

block having crushing strength not

less than 35 kg/sqcm and where

d 37.00 directed by the Architect / Engineer-in- 4559.61 Cmt

charge, in sunk in layer. including

watering, ramming where it is required

etc. complete, as directed by the

Architect / Engineer-in-charge .

Providing and laying cement concrete

flooring ( I.P.S.) 1:2:4 (1-cement : 2-

45 200.00 coarse sand : 4-graded stone 348.08 Sq.M.

aggregate 20mm nominal size) laid in

one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Providing and fixing M.S. grills/ Gate

of required pattern to wooden/ Granite

frames of windows etc. with M.S. flats

at required spacings and frame

46a 4500.00 alround, square or round bars with 100.17 Kg.

round headed bolts and nuts or by

screws all complete as per the

structural designs and directions of

Engineer in charge

Providing & Fixing Structural steel

work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for

all type sections, in framed work,

b 2000.00 including cutting, hoisting, fixing in 126.68 Kg.

position and applying a priming coat

of approved steel primer all complete

as per the structural designs and

directions of Engineer in charge

Applying priming coat over new steel

and other metel surface after and

including preparing the surface by

throughly cleaning, oil, grease, dirt

and other foreign matter and scoured

with brushes fine steel wood, scrapers

and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

interior to give an even shade

including cleaning the surface an even

shade including cleaning the surface

of all dirt, dust and other foreign

Providing & Fixing 1.50 mm Thick

S.S.-304 Grade 1150 mm High S.S.

Railing having Hand Rail Member of

50 mm Dia., 4 No. of Horizontal Pipe

e 15.00 of 16 mm Dia. & Baluster Suppprt of 2270.21 R.Mtr.

40 mm Dia. At Every Third Step as

per Detail Given. Rate Includes All

Work Complete as per Description &

as per Direction of Engg. in Charge.

Providing and fixing in position

collapsible steel shutters with vertical

channels 20x10x2 mm braced with flat

iron diagonals 20x5 mm size with top

& bottom rails of T-iron 40x40x6 mm

with 38 mm dia. Steel pulleys

complete with bolts , nuts , locking

arrangement , stoppers , handles

including applying a priming coat of

red lead paint.

Providing corrugated 0.80 mm (22

gauge) thick G.I. sheets roofing fixed

with galvanized iron ‘J’ or ‘L’ hook

bolts, and nuts 8 mm. dia with

bitumen and G.I. limpet washers filled

with white lead complete excluding

the cost of purlines, rafters and

Providing valleys 900 mm. overall in

plain 1.6 mm. thick G.I. sheet Class –

c 3.00 3 fixed with ‘J’ or ‘L’ hook bolts and 1042.78 Sq.mt.

nuts galvanized from ‘J’ or ‘L’ hook

bolts and bitumen washers complete.

Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together

through their entire length and jointed

together at the ends by end locks

48a 9.00 mounted on specially designed pipe 3468.72 Sq.M.

shaft with bracket plates, guide

channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood

cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Providing and fixing 27mm domal

Series - 1.2 mm Th. Alluminium

Section Three track Sliding window

With Metalic Powder Coating and

MM Clear Glaas(Non Tuffen) Include

All Accessaries and Fixture etc.

complete as per the direction of

Engineer-in-charge.

Providing and fixing 27mm domal

Series - 1.2 mm Th. Alluminium

Section Two track Sliding window

With Metalic Powder Coating and

MM Clear Glaas(Non Tuffen) Include

All Accessaries and Fixture etc.

complete as per the direction of

Engineer-in-charge.

ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door

work (Single Shutter OR Double

Shutter with fix glass) made from

Jindal or equivalent make Powder

Coated (50 micron pure polyester

coating ) ,aluminium section frame

built up standard tubular and other

section of approved make confirming

to IS 733 and IS 1285 , member size

with shutters of horizontal member

vertical member Confirming to IS733

and IS 1285 fixed with rawl plug abd

screws or fixing clips or with

expansion hold fasteners including

necessary filling up of gaps at

junctions at top bottom and sides with

required PVC/ Neoprene felt, 8/12 mm

c 16.00 toughened glass of approved make 5401.70 Sq. M.

etc. Aluminum sections shall be

smooth, rust free, straight.mitred and

jointed mechanically wherever

required including Door Hardware

such as cleat angles aluminum snap

beading for glazing /paneling, CP

Brass/ Stainless steel screws,

Stoppers, heavy duty floor hing, S.S.

Hinges, aldrop , Locking system,

heavy duty Floor Springs, Pivot and

fixtures and transparent silicon

sealant glass fixing to frame as per

details all complete as per

architectural drawings and the

direction of Engineer in Charge. rate

incl. all type of alumnium sections for

doors as per the detail Architectural

Providing and fixing standared

extruded of alluminium section of size

(Section:2434, @ Wt.0.643Kg/mt )

with colour anodized alluminium frame

for ventilation with 5 mm thick frosted

glass as details etc complete for

Providing and fixing standared

extruded of alluminium section of size

63.50 x 38.10 x 1.95 mm ( Section no:

4605, @Wt 1.094 Kg / Rmt with colour

anodized alluminium frame with 5 mm

thick transparent bronze colour tinted

float glass as details etc complete for

Providing Fixing 1.2 mm thick

Alluminium Section Partition -Fully

Glazed / Partly Panelled Partly Glazed

/ Fully Panelled , Having Size of

50c 43.00 Section of 2.1/2 x 1.1/2 with 4 mm 3124.44 Sq.mtr.

Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber

etc. Complete as per Direction of

Consultant / Engg.incharge.

Providing Fixing 1.2 mm thick

Alluminium Section Partition Door -

Fully Glazed / Partly Panelled Partly

Glazed / Fully Panelled , frame

Having Size of Section of 2 .1/2 x

.1/2 and Door Section Having Size of

Tips Vertical 1 .3/4 x 1 .3/4, Top Rail

50d 13.00 4 x 1 .3/4, Middle Rail 1 .3/4 x 1 4061.77 Sq.mtr.

.3/4, Bottom rail 4 x 1 .3/4 with 4 mm

Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber

Including Lock, Handle, Door Closer,

Door Stoper, Stopper etc Complete as

per Direction of Consultant /

Providing and fixing Structural Glazing

with using the 17 Micron anodised of

approved colour alluminium section as

transium, mullium of size 63mm x

38mm x 2 mm with using 6 mm thick

reflective structural glass of approved

make, colour / Tinted, toughned and

shade and fixed with silicone sealant

and spacer tap and at corner sealed

neoprene foam dust and Air sealed

gasket mirred including scaffolding,

cleaning of glass etc.complete at all

heights anf lifts with all necessary

fitting and fixtures, anchore fasteners,

necessary M.S. or Aluminium

brackets, suitable design for openable

or sliding window as per Architectural

drawing and as directed by Engineer-

in-charge. Grooves between the

glasses to be filled with sealant of

Dow corning - structural sealant

weather sealant 789. The entire

facade should be water proof. The

mullions are to be connected to

bracket by SS-304 nut bolts.

Measurement shall be given as per

actual execution of the work. (Rate

are included providing & fixing of MS

structure steel work wherever

Design supply & installation of

suspended Spider Glazing system

designed to withstand the wind

pressure as per IS 875 (Part-III). The

Suspended System held with Spider

Fittings of SS-316 Grade Steel of

approved manufacturer with glass

panel having 12 mm thick clear

toughened glass held together with

SS- 316 Grade Stainless steel Spider

& bolt assembly with laminated glass

fins 21 mm thick. The Glass fins and

glass panel assembly shall be

connected to Slab/ beams by means

of SS- 316 Grade stainless steel

brackets & Anchor bolts and at the

bottom using SS channel of

50x25x2mm using fastener & anchor

bolts, non staining weather sealants of

approved make, Teflon/ nylon bushes

and separators to prevent bi-metallic

contacts, all complete to perform as

per specification and approved

drawings. The complete system to be

designed to accommodate thermal

expansion & seismic movements etc.

The joints between glass panels (6 to

8 mm) and gaps at the perimeter & in

U channel of the assembly to be filled

with non staining weather sealant, so

as to make the entire system fully

water proof & dust proof.

The rate shall include all design,

Engineering and shop drawing

including approval from structural

designer, labour, T&P, scaffolding,

other incidental charges including

wastage, enabling temporary services

all fitting fixers nut bolts, washer,

Buffer plates, fastener, anchors, SS

channel laminated glass etc. all

complete. For the purpose of

payment, actual elevation area of

Glazing including thickness of joints

and the portion of Glass panel inside

the SS channel shall be measured.

Providing and fixing 12 mm thick

Toughened Glass Door with / Without

Fix Portion Including Floor Spring

51c 4.00 Lock, 300 mm Long Door Handle, Nut 6449.86 Sq.mt.

Bolt, Clamp, Connector and All

accessaries as approved by Engg.

Providing and fixing ISI marked

mm thick flush door shutters

conforming to IS : 2202 (Part I)

decorative type, core of block board

construction with frame of 1st class

hard wood and well matched teak

ply veneering with vertical grains or

cross bands and face veneers on both

faces of shutters with 1.00 mm thick

Decorative Laminated Sheet on both

faces of shutters including ISI marked

Stainless Steel butt hinges, bright

/matt finished 125 mm Stainless Steel

handles of approved quality & make,

ISI marked oxidised M.S. door latches

/ Aldrop Conforming to IS:5930 with

necessary screws etc. complete as

per direction of Engg. incharge.

Providing wood work in frames of

Doors, windows cleare story windows

b 314.00 and othersimilar works wrought, 602.04

framede and fixed in position. (A)

Indian Teak Wood

Providing and fixing 35 mm th.

Shutters for doors windows &

clearstory windows incl. wood

frames as specified 12 cm. x 7cm.

size incl. anodised alluminium fixtures

and fastenings including primer coat

of approved quality and two coats of

oil paint etc. complete.

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

Providing and fixing FRP frame size

100x50 mm and 28mm thick FRP

depress panel shutter having extra

reinforcement on sides & edges in Gel

coat finish. The core of the shutter &

frame is to be filed up with injected fire

retardant grade polyurethene foam

done in situ alongwith embedded

54 39.00 wooden pieces for stiffening & also 2354.22 Sq.M.

taking hinges & fintures. The whole

FRP frame & shutter is to be water

proof weather proof, termite proof &

resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with

necessary screws & alluminium

fixtures & fastenings & fastener

Making connection to the ex.M.H.in

running sewer incl. Dewatering and

other required machinery etc. of

55 following dia pipes at any convenient

time. All damaged work shall be well

repaired as per instructions.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

Making connection of galvanised Mild

steel distribution branch with

galvanised mild steel main 50mm to

80mm nominal bore by providing and

fixing tee including cutting and

threading the pipes complete

Providing throating or plaster drip,

57a 1100.00 grooves and moulding to Wall , R.C.C. 41.25 Rmt

chajja and slab.

Providing & Laying cement vatta

cm x 10 cm in size quarter round in

c.m. 1:1 ( 1 cement, 1 coarse sand)

laid in one layers finishing with a

floating of neat cement watering etc

complete as dire.

Carring out plinth treat ment to post

construction/ existing structure by

spraying chemical solution for termite

control treatment including labour and

material consist ment withI.S.I

specification. Using Chlordene and

58 700.00 Chiorpur files 20EC. As Per 6131_ 104.90 Sq.mt

paret- II Consentration Weight one

percent is recommended i.e one litre

20EC chemical emulsion with19 liter

give1% concrentration inclusive of

one litre chemical emulsion appication

at the rate of 5 Litre chemical/ Sqm of

surface is recommended as per I.S

Carring out timber treatment to all

wood work including drilling holes and

spraying oil based chemical solution

on surface of timber work for termite

control including labour and material

etc. complete. Using Chlordene 20EC.

As Per 6113_part III Consentration

Weight 1.00 percent is recommended

one litre chemical emulsion dillute with

9 liter of kerosene precent

concentration. Total dillute

concrentration will be10litre inclusive

of the litre chemical emulsion

application 0.75/Litre chemical per

one Sqmt printed two coat wood

Paver Block Providing and laying shot

blasted Non - interlocking, Paver

blocks of specified thickness, size,

grade of concrete and colour machine

made and blasting by automatic shot

blasting machine and high density of

as per approved sample of approved

make for footpath, parking areas,

service lanes,cross over and other

areas as mentioned in the drawing.

Including providing and laying 50 mm

thick averave bedding layer of coarse

sand below paver block as per

required grading and specification.

Laid paver block shall be

mechanically compacted. The work of

the paving blocks shall be executed in

60 120.00 line and level by skilled mason of 758.93 Sq.mt.

flooring work only. Small size of paver

block with same specification shall be

used at residue or at end. It should be

laid in such a way that the no cutting

of the paver block to be necessary. If

cutting of paver block shall be

required , than cut by machine only

and laying to be done by skilled

flooring mason. The finished surface

of the paver block shall have coarse

sand Texture Finish. Pave blocks

shall be compacted and shall be re-

laid if necessary. Actual laid area shall

be measured and paid without any

wastage. (A) 80 mm thick M-35 grade

Grey Paver block of size 200mm x

200mm. As per approved rate

Providing and fixing pre-cast concrete

kerb stone of gray cement based

concrete block 30cm length,30cm

height and 15cm thick of M250 grade

61 185.00 concret as per approved design and 358.06 R.mt.

including excavation for fixing in

proper line and level,filling the joint

with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing double action

hydraulic floor spring of approved

brand and manufacture conforming to

IS : 6315, having brand logo

embossed on the body / plate with

double spring mechanism and door

weight upto 125 kg, for doors,

62a 5.00 including cost of cutting floors, 4558.89 No.

embedding in floors as required and

making good the same matching to

the existing floor finishing and cover

plates with brass pivot and single

piece M.S. sheet outer box with slide

plate etc. complete as per the

direction of Engineer-in-charge. With

stainless steel cover plate minimum

1.25 mm thickness

Providing and fixing aluminium

extruded section body tubular type

universal hydraulic door closer

(having brand logo with ISi, IS :

embossed on the body, door weight

upto 36 kg to 80 kg and door width

from 701 mm to 1200 mm), with

double speed adjustment with

necessary accessories and screws

Designing, fabricating, testing,

installing and fixing in position Curtain

Wall with Aluminium Composite Panel

63 70.00 Cladding, with open grooves for linear 3061.95 Sq.mt.

as well as curvilinear portions of the

building , for all heights and all levels

etc. including:

(a) Structural analysis & design and

preparation of shop drawings for

pressure equalisation or rain screen

principle as required, proper drainage

of water to make it watertight including

checking of all the structural and

functional design.

(b) Providing, fabricating and

supplying and fixing panels of

aluminium composite panel cladding

in pan shape in metalic colour of

approved shades made out of 4mm

thick aluminium composite panel

material consisting of 3mm thick FR

grade mineral core sandwiched

between two Aluminium sheets (each

0.5mm thick). The aluminium

composite panel cladding sheet shall

be coil coated, with Kynar 500 based

PVDF / Lumiflon based fluoropolymer

resin coating of approved colour

andshade on face # 1 and polymer

(Service) coating on face # 2 as

specified using stainless steel screws,

nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc.

(c) The fastening brackets of

Aluminium alloy 6005 T5 / MS with

Hot Dip Galvanised with serrations

and serrated washers to arrest the

wind load movement, fasteners, SS

316 Pins and anchor bolts of

approved make in SS 316, Nylon

separators to prevent bi-metallic

contacts all complete required to

perform as per specification and

drawing The item includes cost of all

material & labour component, the cost

of all mock ups at site, cost of all

samples of the individual components

for testing in an approved laboratory,

field tests on the assembled working

curtain wall with aluminium composite

panel cladding, cleaning and

protection of the curtain wall with

aluminium composite panel cladding

till the handing over of the building for

occupation. Base frame work cost for

ACP cladding is included in this item

rate. The Contractor shall provide

curtain wall with aluminium composite

panel cladding, having all the

performance characteristics all

complete , as per the Architectural

drawings, as per item description, as

specified, as per the approved shop

drawings and as directed by the

Engineer-in-Charge. However, for the

purpose of payment, only the actual

area on the external face of the

curtain wall with Aluminum Composite

Panel Cladding (including width of

groove) shall be measured in sqm. up

to two decimal places.

Providing and Fixing Box type metal

letters forming composite box made

from 1mm thick stainless steel plate of

grade 304 having brush finish of

following font size to be fixed at Main

Gate in english and or Gujrati and

including fixing charges. etc.

complete as per direction of Engg.

incharge. for Payment Purpose Height

of Letter will be measured.

a 960.00 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made

out of 2mm thick s.s. plate grade

including making necessary design as

per Architect dwg. Through laser

65a 15.00 cutting including connection to the 6804.07 Sq.mt.

R.C.C./Masonary with necessary

frame,anchor fastnuts,M.S.Plate etc.

complete as per direction of Engg.

Providing and Fixing Sinage - internal

and external signage boards with

65b 7000.00 Vinyle Text on ACP sheet / 2 mm th. 9.38 Sq.Inch

S.S. Plate etc. complete as per

direction of Engg. incharge.

Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board

using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling

and degreasing the board as per

requirement using epoxy reflactive

process by screen painting as

directed etc. complete including

transporting and fixing in C.C. 1:2:4

65c 12.00 with necessary excavation curing etc. 7535.31 Sq.mtr.

complete as per I.R.C. 67-2012

design. A warranty for 7 years for the

Retro reflective sheeting from original

manufacturer & a certified copy of

year outdoor exposure test report

from third party test lab for the product

offered shall be submitted by

contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Road marking with hot applied

thermoplastic paints with reflectorising

glass beads on bitumin surface

providing and laying a hot applied

thermoplastic compound 2.5 mm thick

including reflectorising glass beads @

250gms per sqm area, thickness of

2.5mm is excluding of surface applied

glass beds as per IRC:35-2015. The

finished surface to be level, uniform

and free from streaks and holes.

zebra patta /bump patta lane/center

65d 140.00 line/ edge line/cut patta. The white 364.08 Sqmt

color marking should provide

liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and

Asphalt road shall be min

mcd/m2/lux during the service life

during the day time. The marking

should meet the performance criteria

for night time reflectivity, wet

reflectivity and skid resistance as

mentioned in the section-15 of IRC

352015. Warranty for the Retro

reflectivity should be two years.

CAT EYE/Pavement Marker(MNC two

nail) made out of acrylic

StreneAcrylonitrile or hi-impact poly

Steren fitted with moulded of

metheacrylate(MNC)reflector cube

corner reflector design,filled with

tightly adhering pooting compound as

per ASTMD-788 size 11.5x7x1.60

cms or 10x10x1.75 cms provided with

bituminous adhesive in sufficient

quantity with each unit fixing with two

shrank .Reflector on both side.Co

efficient of lumination as per

specification and compressive strenth

13 tones at 23 degree centigrade

etc.B) Double side lenses.

Providing and fixing eco-friendly light

weight calcium silicate false ceiling

tiles having T egular edge & 15mm

Thick Densified edges on the Tile

Periphery for Extra Strength The Light

weight calcium silicate ceiling tiles

shall have, light reflection 85% non-

combustible as per B.S.476 part IV,

100% humidity resistance and also

having thermal conductivity 0.043°

w/m KC. for the best thermal

The Light weight calcium Silicate tile

shall be of approved texture Fine

fissured/ Spintone/ Cosmos having

NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent

of size 595X595 mm to be laid on true

horizontal level suspended inter

locking metal grid of hot dipped

galvanized steel sections (galvanizing

@ 120 grams per sqm including

bothside) consisting of main ‘T’ runner

suitably spaced at joints to get

required length and size of 24X38 mm

made from 0.30 mm thick (minimum)

sheet, 1200 mm centre to centre, and

cross ‘T’ of size 24X28 mm made out

of 0.33 mm (Minimum) sheet spaced

1200 mm along spaced between main

‘T’ at 600 mm centre to centre to form

a grid of 1200X600mm and secondary

cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to

form grid of size 600X600mm resting

on periphery walls / partitions on a

perimeter wall angle pre-coated steel

of size (24X24X3000mm made of

0.40mm thick (minimum)

sheet with the help of rawl plugs at

450mm centre to centre with 25mm

long dry wall screws @ 230mm

interval and laying 15mm thick

Densified edges light weight calcium

silicate ceiling tiles of approved

texture (Fine Fissured/

Cosmos/Spintone) in the grid

including, cutting /making opening for

services like diffusers, grills, light

fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to

be suspended from ceiling using G.I.

slotted cleats of size 25X35X1.6mm

fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel

level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre

long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-

painted with polyester baked paint, for

, as per specifications, drawings and

as directed by engineer-

incharge.Note:- Only calcium silicate

false ceiling area will be measured

from wall to wall. No deduction shall

be made for exposed frames/ opening

(cut outs) having area less than

sqm. The calcium silicate ceiling tiles

shall have NRC. Value of

(Minimum) for Fine fissured/ Spintone/

Cosmos and 0.75 NRC for Globe,

light reflection 85% noncombustible

as per B.S. 476 part IV, 100%

humidity resistance and also having

thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation

Providing and fixing single layer water

proof gypusm board 12.5 mm thick of

the make New good Group Co.Ltd. or

equivalent & New good Group Co.Ltd.

company sections using water proof

board of size 1220 mm x 1830 mm x

8.0 mm suspended by G.I suspender

of size 25 mm x 3 mm with

intermediate channel of size 18mm

x40mm x0.80mm at 1220 mm center

66b 205.00 to center ceiling section of size 600.94 Sq.mt.

40mmx 35mmx 0.55mm at 457 mm

center to center and perimetre chanel

A of size 20mm x 27mm x 30mm x

0.50mm at edges & drops including

paper taps and sofit cleat, anchor

fastener, scoch bolt connecting cleat

joining compound top coat on ceiling

including making necessary opening

for light fitting, diffuser etc. complete

as per detail drawing as directed.

Providing and Fixing 6 mm thick

Lexan Polycarbonate multi wall

67 10.00 roofing sheet fixed with hilti screw and 1427.62 sq.mt.

rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete

as directed by Engineer in charge

Manufacturing,testing ,supplying

loading,,transporting to work

site,loading unloading lowering in

trenches,laying and jointing RCC NP3

class pipes in C:M 1:1 including all

jointing materials such as

cement,sand,hemp bitumen as

directed testing the pipe line to a head

of 1.5 mt and hydraulic test as

directed etc comp.

a 80.00 300 mm Diameter 616.07 Rmt

b 20.00 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type

Catch Pit of size

x 0.60 depth up to 1 mt including

excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall

in the prop. of CM

69 8.00 (1:6) with 40 mm thick IPS flooring in 3125.00 No

the prop M15 at

bottom and 15 mm thick cement

plaster inside the catch pit in the

proportion of CM (1:3) with out jali etc.

CatchPit Jali Fixing P/F FRC catch pit

70 8.00 jali with frame 600mm x 600mm clear 1383.93 No

opening etc. comp.. As directed by

engineer in charge.

PERCOLATION WELL

71 120.00 Drilling of pilot bore hole in Alluvial 694.64 Rmt

Strata by direct Rotary Rig of 250 mm.

72 120.00 Reaming 400 mm 212.50 Rmt

73 1.00 Electro Logging charges with carting 16071.43 Job

Providing and Installing 200 mm dia

74 60.00 IS:12818 upvc Casing Pipe "CM" 1193.75 Rmt

class plain Pipe

Providing and Installing 200 mm dia

75 1.00 IS:12818 upvc End Cap, with Air Vent 669.64 Set

200 mm dia Regular with 1.5 mm

sloted size cage type trapezoidal

76 60.00 shape wire wound little carbon 1146.43 Rmt

galvanized screen confirming to

77 15.00 Supply of Pea sized Gravel 2029.46 Cmt

78 1.00 Air Vent of 50 mm Bend 401.79 Unit

79 120.00 Lowering and Removing of Dropline 147.32 Rmt

up to Depth 186 mtr.

80 1.00 Air Compressor 60 CFM/150 PSI 22205.36 Ls

Estimate For Civil Work With Total Rs.

Percolation Well

I. No. Qty Items Unit Rate Per Amount

Electrical Work Estimate

1 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated

multi strand copper wires up to 10 mtr

length , in below type of pipe erected

with 6A Modular type switch / bell

1.1 push & accessories and earth

continuity of following type, erected

on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling

as per pipe erected, with necessary

Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe

205.00 and accessories erected concealed in 505.05 Pt

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade

ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr

length, in below type of pipe erected

with 6A Modular type switch and hum

free EME four or more step type

electronic fan regulator with

separately mounted and accessories

with earth continuity of following type

erected on PVC / Metallic/Wooden

box, single mounting base frame

covered with textured/metallic/white

front plate modules erected on / in

wall / ceiling as per pipe erected. with

necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe

85.00 and accessories erected concealed in 701.40 Pt

wall/ceiling complete

Point wiring for secondary light point

with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires, in

below type of pipe to be erected

complete with earth continuity and

necessary connection with primary

1.3 light with accessories erected on

Metal / PVC / wooden box covered

covered with appropriate front plate

modules erected on / in wall / ceiling

for open / concealed wiring. with

necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe

erected with following type of

Note:- Maximum up to 6 mtrs length,

excess will be considered as Mains

for Secondary Point.

(f) with medium class Rigid PVC pipe

145.00 and accessories erected concealed in 174.30 Pt

wall/ceiling complete

Point wiring for Individual Plug with &

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr

length, in below type of pipe erected

1.4 complete with Modular type switch &

pin Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules

erected on / in wall / ceiling as per

pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-

1.4.1 90.00 1.5 sq.mm Cu. Wire from nearby 530.25 Pt

switchboard/mcb db board

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete

[II] For 16A Plug and 16 amp switch

1.4.2 15.00 with 2-2.5 sq.mm Cu. Wire from mcb 774.90 Pt

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete

[III] For 16A Plug and 16 amp switch

with 2-4 sq.mm Cu. Wire with

sq.mm ( green) earthing wire from

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin

socket erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules

erected on / in wall / ceiling with

following type accessories

Point wiring for Two Way Controlled

Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi

strand copper wires erected in below

type of pipe with 6A Modular type

switches and following type of

accessories erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules

erected on / in wall / ceiling as per

pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe

6.00 and accessories erected concealed in 627.90 Pt

wall/ceiling complete

Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections

as per site situation directed by

Engineer In charge.

1.7.2 60.00 (2) One No 5 pin plug 150.00 E.a.

1.7.3 60.00 (7) Blank Plate Single 25.00 E.a.

1.7.4 32.00 (8) Computer RJ-45 socket 159.00 E.a.

1.7.5 4.00 (9) 16 Amp. SP one way switch 179.00 E.a.

1.7.6 4.00 (10) 6/16Amp. Universal socket 198.00 E.a.

pole Modular MCB Switch

Double Pole Modular MCB Switch

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated

1.9 Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

providing and erecting Mains with ISI

marked electrolyte stranded copper

conductor, Non PVC Zero Halogen

free fire retardant insulated copper

1.10 conductor, insulated wire (HRFR)

conforms to IS-694, erected in

existing pipe with 1.5sq. mm copper

conductor of same specifications for

earth continuity of following size.

In Existing medium class Rigid PVC

pipe and accessories

providing and erecting Mains with

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

1.11 erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

(A) with medium class Rigid PVC pipe

and accessories

(use earth wire of 4 sq.mm )

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor

with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected

in existing pipe of following size

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size of

copper lugs, nuts and bolts if required.

1.12.1 20.00 (e) One wire 6.00 sq. mm 56.00 Mtr

1.12.2 20.00 (f) One wire 10.00 sq. mm 91.00 Mtr

1.12.3 10.00 (g) One wire 16.00 sq. mm 141.00 Mtr

1.12.4 5.00 (h) One wire 25.00 sq. mm 234.00 Mtr

1.12.5 40.00 (i) One wire 35.00 sq. mm 298.00 Mtr

1.12.6 10.00 (j) One wire 50.00 sq. mm 466.00 Mtr

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

1.13 grade ISI marked copper wires of

following size to be erected as

1.13.1 80.00 e) 1.50 Sq.mm 3 core round PVC 46.00 Mtr

1.13.2 40.00 h) 2.50 Sq.mm 3 core round PVC 77.00 Mtr

1.13.3 20.00 k) 4.00Sq.mm 4 core round PVC 175.00 Mtr

Supplying & erecting M.S. Box having

16 Gauge painted with red oxide or

1.14 Heavy duty PVC box erected flushed

on wall or concealed in wall with

necessary plastering & finishing as

directed of following size.

Supplying and laying UPVC cable

trunking system comprising

unplasticised polyvinyl, chloride rigid

material with ignition free and flame

1.15 proof confirming BS with necessary

end caps Internal and external bend,

flat bends, coupler, tee etc..All

necessary accessories and measuring

of following sizes

1.15.1 5.00 (2) 100 mm x 50 mm trunking 424.00 Mtr

(4)100 mm x 50 mm trunking with

1.15.2 5.00 TWIN compartment With clip in 1309.00 Mtr

Supply & installation of surface

mounted U PVC snap-on adaptable

trunking raceways, fabricated out of

U-PVC to Off-White or approved

shade as per IS 733 of thickness

1.16 2.0mm for the base and sides with all

accessories like removable covers,

joints ,height spacer,angles complete

with necessary bends, suitable sized

junction boxes and tees etc,

(a)Size: 50x80mm PVC Raceways for

5.00 Power & Data with 2 compartments 1052.00 Mtr

above specifications.

Supply & installation of modular type

accessories for U PVC snap-on

1.17 adaptable trunking/Pop up Box with

required items erected with

necessary connection. As desired by

Engineer In charge

1.17.1 4.00 i) 6 A SP 1 Way Switch 204.00 No

1.17.2 2.00 ii) 16A SP 1 Way Switch 351.00 No

1.17.3 4.00 iv) 6A universal socket shuttered 347.00 No

1.17.4 2.00 iv) 6/16 A universal socket shuttered 458.00 No

1.17.5 2.00 vi) Cat-6 LAN Socket 561.00 No

Supplying & erecting approved make

Telephone Cable electrolytic copper

conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for

telephone wiring & confirming to C-

DOT erected in existing pipe. of

following size of conductors & nos.of

pairs. With necessary connections.

(b) Armoured [Jelly Filled]

30.00 1) Ten Pairs 124.00 Mtr

1.19 LAN NETWORK

SITC of CAT6 UTP 24AWG PATCH

CORD:1M,Plug 30U' Snag less

(Including Five year free maintenance

with guarantee)

SITC of CAT6 UTP 24AWG PATCH

CORD:2M,Plug 30U' Snag less

(Including Five year free maintenance

with guarantee)

1.20 LAN SWITCH

SITC of 24 x 10/100/1000BASE-T

ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and

1.20.1 2.00 security features L2+ Static Routing 15247.00 No

Optional “standard mode” or

“surveillance mode” management

SITC of Patch Panel UTP Keystone-

1.20.2 2.00 24 Port- Unloaded (Cat 5e,Cat 6 & 1485.00 No

Cat 6 A ) (Including Five year free

maintenance with guarantee)

Providing & erecting main Distribution

1.21 (MDF) indoor type, back mounted

frame as per DoT standard approved

with krone strips

1.00 (a) Suitable for 10 pair 985.00 E.a.

Providing & Erecting Netwrok rack

with following capacity with Necessary

1.22 cooling fan,Cable manager,6A

PDU,equipment rack with necessary

mounting accessories.

Supplying & erecting approved make

1.23 LAN cable of following size in existing

pipe as per direction

SUB - TOTAL OF INTERNAL

2 Switchgears , Panels , MCBDBs &

Providing and erecting Approved

make Four pole moulded case circuit

breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal

current rating 200A.with variable

2.1 Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

16 G.M.S.housing. Overload release

Range: 84 - 125Amp

2.00 ICS=100% of ICU only 17667.10 No

Providing and erecting Approved

make Four pole moulded case circuit

breaker having breaking capacity ICU

of 35 KA. and above at 415 V .

having normal current rating 250A.

with variable thermal & magnetic

release suitable to work on A.C.supply

50 c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

Overload release Range: 108 -

1.00 ICS=100% of ICU only 22812.90 No

2.3 FABRICATION AND BUSBARS

Fabricating the box type items made

from M.S. Sheet with A.I. supports,

wings, doors, handles other hardware

materials as per requirement design

2.3.1 18.00 with finishing by three tank powder 179.00 Kg

coating processed inside and outside

painted, erected as directed including

minor civil work. to install above

Providing and erecting busbar

chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust

& vermin proof having hinged door

with rubber gasket and necessary

busbar supports with COPPER

busbar having current density not

more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly

wrapped with colour insulation tape

for phase sequence, three phase &

neutral each suitable for following

current capacity with necessary

painting mounted on wall or pedestal

frame of required size with necessary

1.50 (C) Suitable for 300 Amp. capacity 8455.00 RnMtr

providing and erecting Approved

make Earth fault Relay suitable to

mount with inter connection suitable to

following size of moulded case circuit

2.3.3 breaker having CT ratio & MCCB

rating as following along with shunt

trip 220V AC. with all internal

connections & complete erected in

existing M.S.housing..

Design, fabrication, assembling,

supply, installation, testing and

commissioning of cubicle type, wall /

Floor mounted LT panel suitable for

415 V 3 phase, 4 wire 50 Hz AC

supply system fabricated in

compartmentised design from CRCA

sheet steel of 2 mm thick for frame

work ,Doors and partitions IP 42 and

covers,3 mm thick for gland plates i/c

cleaning and finishing complete 9 tank

process in house facility for powder

coating in approved shade,

extendable type FP aluminium alloy

busbars of high condectivity,

DMC/SMC busbar supports, entire

panel shall have a common copper

2.4 earthbar of size 25mm X 5 mm at the

rear with 2 Nos. earth studs, solid

connection from main busbar to

switchgears with require size of

aluminium busbar & control wiring

with 1.5 sqmm FRLS insulated copper

conductor cable, cable alleys, cable

gland plates i/c accessrories as per

specification and providing

switchgears, metering instruments

etc. for following panel.G.A.Drawing to

be approved by EIC or consultant. (

Outgoing connectors must be nut-bolt

type. Outgoing mains for 63Amp

MCBs must be of 4 x 16sqmm cu

flexible wires).Incomers Mains for

MCBs shall be always from the

( a ) Providing cable clamps /

supports within distribution boards

( b ) All hinged door shall be earthed

through 2.5 sq mm tinned b raided

( c ) Pad locking of MCCB’s handles

in “OFF” Position.

( d ) All the C.T.s should be auto short

( e ) All the MCCB's should be with

( f ) All incoming and outgoing air

circuit breakers shall be placed on

middle portion of the vertical in single

tier formation.

( g ) Any descripancy found in SLD &

Boq , it should be brought in the

notice of the client / consultant, and

the decision will be taken final by

Client / consultant.

Providing and erecting Approved

make Four pole moulded case circuit

breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal

current rating 200A.with variable

2.4.1 Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

16 G.M.S.housing. Overload release

Range: 84 - 125Amp

1.00 ICS=100% of ICU only 16061.00 No

providing and erecting Approved

make Earth fault Relay suitable to

mount with inter connection suitable to

following size of moulded case circuit

2.4.3 breaker having CT ratio & MCCB

rating as following along with shunt

trip 220V AC. with all internal

connections & complete erected in

existing M.S.housing..

providing and erecting Miniature

circuit breaker single pole 0.5A to 2A

system and having breaking capacity

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

providing and erecting Miniature

circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C.

2.4.5 4.00 system and having breaking capacity 111.00 No

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

Providing & erecting 240 V MCB

double pole switch for motor &

inductive load (C Curve) having

KA breaking capacity & confirms to IS

: 8828 in existing box having following

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

2.4.7 Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box

having following capacity

Providing and erecting following

2.4.8 additional parts for panel mounting

(A)Extended operating rotary handle

with pad lock with three position

trip,off,on suitable for 25A to 250 A

Supplying and erecting approved

make panel mounting type Digital

Voltmeter having 3 digits LED display,

2.4.10 1.00 0 to 750 AC Volts range erected on 1263.00 No

existing panel board with all

connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved

make panel mounting type Digital

Ammeter having 3 digits LED

display, external CT operated,

2.4.11 1.00 calibrated for 0 to 1000 Amps suitable 1543.00 No

to operate on 500 Volt AC , erected

on existing panel board with all

connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting Ammeter /

2.4.12 2.00 Voltmeter selector switch for 3 phase 314.00 No

AC Supply 500 V on existing panel

board with necessary connections.

Providing & erecting L.T. Current

Transformer with bar primary 50/5 to

2.4.13 6.00 1000/5 ratio 15 VA burden erected in 272.00 No

existing CRCA box duly secured with

insulating materials connected to the

Supplying & erecting approved make

Power Factor Meter 150mm dia

flush/projection type/ balanced &

unbalanced load to work with

2.4.14 1.00 appropriately provided CT’s 100/5A to 5052.00 No

400/5A ratio & other accessories

complete erected in M.S. box &

connected to the circuit by means of

PVC copper Core leads.

Supplying and erecting approved

2.4.15 6.00 make suitable panel indicator LED 43.00 No

type lamp, lens cover, complete

erected with necessary connections.

Providing and erecting metallic

vitrified danger notice board as per

language suggested by engineer

incharge for MEDIUM VOLTAGE

installation to be erected as per IS-

Providing and erecting required size

Aluminium strip for earthing of H.T.

2.4.17 2.00 OCB / ACB / Transformer, LT panel 223.00 KG

board, Motors etc. using copper

Providing and erecting required size

2.4.18 3.00 Copper strip for earthing of H.T. OCB 787.00 Kg

/ ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

providng and erecting Approved make

energy meter 3 phase 4 wire

2.4.19 1.00 unbalanced load 500 V. 5 to 10A 2179.00 No

complete erected as directed with

necessary earth wire.Class-1

Providing , erecting , fabricating the

M.S. structure as per requirement on

site incorporating proper size of M.S.

angles,square,round, flats, bars,

channels, sections complete with

2.4.20 90.00 cutting, welding, grinding & finishing 77.00 Kg

duly painted with one coat of red

oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing,

plastering & finishing complete.

Supplying and erecting triple pole &

neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos.

of electrolyte bus having current

density not more than 1.6 Amp. /

sq.mm (Rated current / cross section

area) duly wrapped with colour

insulating tape for phase sequence of

following current carrying capacity,

erected with necessary bus bar

supports /insulators, main cable

socket to each bar, erected in existing

cubical panel with necessary

4.00 (B) Suitable for 200 Amp. capacity 3171.00 RnMtr

Providing & erecting weather proof,

dust & vermin proof, floor mounted

front operated indoor type cubical

panel board necessary IP-42 and

above protection as per approval

from engineer incharge made from

SWG thick CRC M.S. sheet for outer

2.4.22 body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with

necessary accesories , supporting

angles/ flats channel including

cutting, bending, drilling, welding,

riveting with internal partitions & cable

alley as per requirements & instruction

of engineer-in-charge with erection of

supplied switch gears, BUSBARS,

suitable size of inter connecting PVC

copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring

instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates,

sufficient nos. of hinged doors,

handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice

board,necessary ventilation,earthing

strip complete. The Panel shall be

painted with epoxy powder coating.

(The rates excludes the cost of

switchgears, bus bars, inter

connecting mains & Copper

Aluminium strips, meters, Fuses etc.

The dimension shall be measured

excluding base beams) The panel

shall be supplied with following

approved manufacturers with

following size.

(B) The standard companies switch

gear shall be used and only

manufacturers at CPRI approved

3.00 (i) with 350mm depth 14755.00 Sqmtr

Supplying & erecting

XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be

erected as directed of following size.

a (N) 4 core 16 Sq. mm

b (M) 4 core 10 Sq. mm

c (L) 4 core 6 Sq. mm

d (C) 2 core 6 Sq. mm

e (B) 2 core 4 sq.mm

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor

with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected

in existing pipe of following size

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size of

copper lugs, nuts and bolts if required.

a (a) One wire 1.00 sq. mm

b (b) One wire 1.50 sq. mm

c (c) One wire 2.50 sq. mm

Design, fabrication, assembling,

supply, installation, testing and

commissioning of cubicle

type,20KVAR, Voltage Rating 415V

2.4.25 1.00 A.C.,3-Phase , APFC Panel having 5- 110035.00 No

steps ( 2x1 -3x1 -5x3 kvar heavy duty

can type capacitors ) with suitable

rating of Incomer MCB, CT. as per

approved by engineer incharge.

Supplying & erecting approved make

IP 55 grade Company fabricated

Timer Panel of following capacity for

switch On-Off street lights on time

scheduling basis made from 16G

CRCA sheet duly epoxy power

painted inside and outside with hinged

2.4.26 doors and locking arrangement

consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III)with

analog time switch, auto manual

switch of same make and suitable

input and output Bakelite terminals

and with door earthing approved by

Engineer in charge.

MCBDBs and MCBs

providing and erecting Miniature

circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C.

2.5 150.00 system and having breaking capacity 111.00 E.a.

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

Providing & erecting 240 V MCB

double pole switch for motor &

inductive load (C Curve) having

KA breaking capacity & confirms to IS

: 8828 in existing box having following

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

2.7 Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box

having following capacity

Sheets steel powder coated enclosure

2.8 4.00 suitable for incorporating One/Two 175.00 E.a.

Providing and erecting Sheet Steel

powder coated MCB distribution board

- flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

2.9 rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and

horizontal single phase outgoing

(b) sheet steel double door (IP-43)

2.9.1 4.00 (i)4 way ( concealed manner ) 747.60 E.a.

2.9.3 4.00 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.9.5 3.00 (iv)12 way ( concealed manner ) 1773.60 E.a.

(B) three phase incoming and single

2.10 phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

2.10.1 4.00 (i)4 way ( concealed manner ) 2779.20 E.a.

2.10.3 3.00 (ii)6 way ( concealed manner ) 3462.00 E.a.

2.10.5 5.00 (iii)8 way ( concealed manner ) 4054.80 E.a.

Supplying & erecting Sheet Steel

powder coated Cable end termination

Box to be mounted on Top or Bottom

2.11 of the MCB Distribution Box for

housing/covering Extra wires &

Cables, suitable for following size of

2.11.1 8.00 (G) Three Phase 8 Way ( concealed 819.60 E.a.

2.11.2 8.00 (G) Three Phase 8 Way 683.00 E.a.

providing and erecting Approved

make ELCBs / RCCBs conforming to

IS: 12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

2.12 operation on single phase

V,50Hz. having characteristic of quick

action & tripping with all advance

feature & do not incorporate any

electronic component. for following

Max. rating erected as directed

Providing and erecting metallic

vitrified danger notice board as per

language suggested by engineer

incharge for MEDIUM VOLTAGE

installation to be erected as per IS-

Providing & erecting Medium Voltage

Danger Notice Board sticker as per

2.14 15.00 language suggested by engineer 26.00 E.a.

incharge of standard size as per IS-

SUB - TOTAL OF Switchgears ,

Panel and MCBDBs.

Follow IS code :3043 is the guideline

for the earthing

Providing and erecting required size

HOT deep Galvanised iron strip for

3.1 180.00 earthing of H.T. , OCB/ ACB/ 77.00 KG

Transformer LT panel board, Motors

etc. using proper clamp.

Providing and erecting required size

3.2 15.00 Copper strip for earthing of H.T. OCB 787.00 KG

/ ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

3.3 15.00 Providing and erecting Annealed bare 787.00 KG

Copper wire 8 to 16 SWG.

Providing and erecting HOT deep

3.4 45.00 Galvanised iron strip wire 8 to 16 77.00 KG

Supplying & erecting earth pit of

minimum bore dia.150mm size

approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron

galvanising, connection terminal dia of

12mm with constant ohmic value

surrounded by highly conductive

compound with high charge

3.5 dissipation suitable for following type

of applications with chamber and

heavy duty cover.(approved make

OEM has to submit test certificate) &

having back filling compound of (B)

Inner chemical (CCM Compound)-

Resistivity:- 0.2 W/ meter testing as

per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound

:- Earthing compound should be

capable to retain moisture for long

time Necessary test report must be

(a) For Electrical Installation up to

440V in normal soil

3.5.1 3.00 Length of pipe - 1 Mtr 4546.00 E.a.

Back filling compound - 1 Nos Bag of

(c) For Electrical Installation covering

Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant &

Sensitive Computer System(like

3.5.2 1.00 Automation, SCADA) i.e independent 8551.00 E.a.

Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

Supply, installation,testing and

commissioning of Chemical Earthing

with UL Certified 17.2mm Dia. X

3000mm Long 254 Micron-Copper

bonded M.S. Rod manufactured as

3.6 2.00 per IEC 62561-2 with 25Kg Bentonite 12230.00 No

powder plus " U " bolt rod clamp

complete with Lockable high

performence chamber suitable &

tested for 5000T capacity with SS

Hardware.or equivalent

SUB - TOTAL OF Earthing

4 CABLES, Cable Termination and

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

4.1 conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following size

Sq.1/2 mm core)

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium

4.2 conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following size

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with

necessary clamps or in existing trench

/ pipe of following size of cables

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

4.4 for 1.1 KV. to be laid on wall with

necessary clamps or in existing

trench / pipe at road crossing or floor

of following size of cable.

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe at road

crossing or floor of following size of

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

4.6 for 1.1 KV. to be laid on wall with

necessary clamps or in existing

trench / pipe at road crossing or floor

of following size of cables.

20.00 (C) 4 core 10 Sq. mm 670.00 Mtr

Making trench in soft soil of suitable

width of 90 cm deep for laying cable

4.7 190.00 or locating the fault all over the run 55.00 Mtr

and back filling the same and making

the surface as normal ground.

Covering of cable with second class

bricks or cement tiles laid cover the

cable crosswise & also on both sides

with covering of 7. 5 Cm. layer of sand

above & below cable (16 bricks per

( A )Making trench in Hard Murrum /

Tar Road of suitable width of 90 cm or

4.9 15.00 required depth for laying any size of 74.00 Mtr

cable or locating the fault all over the

run and back filling the same and

making the surface as normal ground.

4.10 5.00 (B) If additional machinery like 354.00 Mtr

hammer driller or JCB use [Add]

Drilling the road without breaking the

road surface (Asphalt) for laying of

4.11 cable for feeding power supply by

making up to following size of holes at

both ends complete.

4.11.1 5.00 (A) Up to 100 mm bore dia 488.00 Mtr

4.11.2 5.00 (B) Up to 150 mm bore dia 610.00 Mtr

Supplying following size of Light duty

4.12 “A” Class G.I . Pipe & erecting as

directed by Engineer-in-charge.

10.00 (A) 25 mm dia 171.00 Mtr

Providing & laying. R.C.C. Hume pipe

for cable to be laid 90 cm. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original.

Providing & laying approved make

Double walled corrugated pipes

(DWC) of polyethylene(conforming to

IS 14930 II )with necessary

4.14 connecting accessories of same

material at required depth in existing

trench for laying of cable. below

ground / road surface for enclosing

4.14.1 90.00 (A)50 mm outer dia 62.00 Mtr

4.14.2 200.00 (B)63mm outer dia 73.00 Mtr

4.14.3 50.00 (C))90 mm outer dia 95.00 Mtr

4.14.4 40.00 (D)120 mm outer dia. 136.00 Mtr

Providing & laying approved make

ISI marked Rigid PVC pipe having

6Kg / cm2 (Class-3) to be erected at

4.15 road crossing on or floor as directed

for laying of cable. The pipes as

following size of dia & weight per

4.15.1 15.00 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124.00 Mtr

(F) 110 mm inner Dia. (11.63 Kg/6

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

armoured cable complete with out

going tails, insulating tape etc for

following size of cables.

Providing and, fixing heavy duty

flange type brass double compression

type cable gland with rubber ring for

4.17 PVC insulated armoured cable

complete with out going tails,

insulating tape etc for following size of

Solder less crimping type Aluminium

lugs conforming to IS suitable for

cable of following size evenly crimped

4.18 with high pressure tool & connected to

switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with

4.19 high pressure tool & connected to

switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

Providing and fixing approved make

Perforated C type cable tray. Made

from sheet steel. The cable tray

should be single or double bended as

per required and as per IS 2062/1079

and shall be coated with hot dip

4.20 galvanizing as per IS 2629/4759. with

max 17.5% perforation with coupler

plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection

with necessary support( included) as

per Specification and as per

instruction of engineer in charge..

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5 Light Fixtures & Fans

Supply , Installation, testing and

commissioning of pre-wired, LED

fitting/post top luminaries etc of all

types, complete with all accessories

and tube etc. directly on ceiling/ wall,

including connection with 1.5 sq. mm

FRLS PVC insulated, flexible, copper

conductor, single core cable with

flexible conduits and coupler and

earthing etc. as required. Note:- The

LED Light fixtures should comply all

international standards third party (

LM 79 for complete fixture, LM 80 for

individual LED ). The Manufacturer /

Channel Partner of the Manufacturer

has to submit 4- Years unconditional

free Replacement Guarantee for

complete fixture.

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single

MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/

aluminium die cast powder coated

and high U.V. & corrosion resistance

with diffuser with company

mark/name 160V to 270V, Power

Factor more than 0.95, THD <

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges shown.)

5.1.1 ( A ) Tube Light with integral / non

integral driver

5.1.1a 25.00 (iii) 18-20 Watts, Surge - 2KV,IP-20, 293.00 No

conventional 2/ 4 feet

5.1.1b 65.00 (v) 36-40 Watts, Surge-2 KV, IP-20, 530.00 No

conventional 4 feet

(B) LED Panel Light with provision for

5.1.2 Plane front frame with translucent

cover fixed to housing complete.IP20

5.1.2a 4.00 (i)up to 8 Watts,4" x 4", Surge-2 KV 271.00 No

5.1.2b 100.00 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462.00 No

(iv) 18 to 20 watts, 8" x 8", Surge-

5.1.2d 40.00 (vi) 36 watts, 24" x 24", Surge- 2KV 1777.00 No

(G) Spot Light 425 Lumens, Surge-

5.1.4 2.00 (H) Mirror Light 9 Watts, wall mounted 309.00 No

minimum 1 feet long

(I) Adjustable spot light with COB led

5.1.5 having aluminium reflector of following

Providing & erecting Approved make

Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz

5.2 60.00 mm sweep complete having 3blades 1929.00 No

with aluminium blades with , canopy &

30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Providing & erecting Approved make