COMPREHENSIVE/ DAY TO DAY MAINT INCLUDING HANDLING ONLINE COMPLAINT SYSTEM IN JCO/OR MD ACCN AT PALAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance exceeding not exceeding100m complete all as specified and directed.

Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m, complete all as specified.

Taking down shutter of any description not exc1 sqm each, and refixing in same opening after easing, adjusting and replacement of nails, complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening after easing, adjusting and replacement of nails, complete all as specified and directed.

Resecuring , Refixing or easing & adjusting without taking down shutters of any description exc 1 sqm and not exc 2 sqm each, complete all as specified.

Taking down Aluminium door shutter/ partition hung type/ sliding type / fixed, any size and re-fixing in same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc. and make smooth functioning to entire satisfaction of Engr-in-charge, complete all as specified.

Taking down Aluminium window shutter hung type/ sliding type / fixed, any size and re-fixing in same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, locks, stays,hinges etc. and make smooth functioning to entire satisfaction of Engr-in-charge, complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Mild steel butt hinges of size 100mm medium weight cold rolled , and fixed in repair, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section of size 150 mm and fixed in repair, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section of size 100 mm and fixed in repair, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, anodised, of size 100mm, fixed in repair, complete all as specified.

Extruded aluminium alloy handles, fabricated type, anodised, of size 150mm, fixed in repair, complete all as specified.

Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 30mm (when open), complete all as specified.

Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 30mm (when open), fixed in repair, complete all as specified.

150mm size, Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, fixed in repair complete all as specified and directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, fixed in repair , complete all as specified.

150mm to 200mm size, Mild steel helical door spring for door closer, including roller and roller plate , fixed in repair complete all as specified and directed.

Cast iron, Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed, fixed in repair , complete all as specified.

Door closer, Aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed, fixed in repair , complete all as specified.

Drawer handles, mild steel, projection drop (50mm to 65mm) on screwed plate, fixed in repair, complete all as specified.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete , fixed in reapir, all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,overall length of cover plate 150mm, fixed in repair complete all as specified and directed.

Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size, fixed in repair , complete all as specified.

Magentic catcher and striking plate including letting in and fixed , complete all as specified

Stainless steel (SS-304) , peg set of five, with hromium plated back plate , 40mm wide, fixed with chromium plated screws, fixed in repair, complete all as specified.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repair , complete all as specified and directed.

Sheet glass, 3mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.

3mm thick, figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.

Securing glass of any description in existing wooden/metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work, complete all as specified.

25mm dia, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. , fixed in repair , complete all as specified

18/19mm thick, Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in repair , complete all as specified.

6mm thick, external teak wood lipping, fixed with nails to block board or venerred particle board 18/19mm thick , complete all as specified.

40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in flooring,, surface finished even and smooth , without using extra cement complete all as specified and directed.

25mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregates) as in sub base complete all as specified and directed. .

Mat finish, premium quality, joint free (edge cut), coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match after roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the GE

Vitrified ceramic tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Vitrified ceramic tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 complete all as specified and directed. Note : Size,Shade and Colour of tile shall be approved by the GE.

Glazed ceramic coloured tiles of size 450 mm x 300 mm x 7 mm/350 mm x 250 mm x 7 mm / 1200x600x7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 complete all as specified and directed. Note : Size,Shade and Colour of tile shall be approved by the GE.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

Rendering cement plaster 15mm thick in cement mortar 1:6(1 cement :6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

Rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of brick or on concrete surfaces, as in ceiling , surface finished even and smooth without using extra cement, all as specified.

Preparing surface of sunken slab in toilet flooring and applying 15mm thick cement plaster in CM 1:4 mixed with intergal water proofing compound both on floor and wall, including laying and testing of bituminous coating system based on bituminous emulsion , including application of one coat of primer and laying APP membrane 3mm thick as per manufacturer specification in sunken portion , filling the sunken portion with PCC 1:4:8 using brick aggregate , including 40mm dia GI medium grade pipe 600mm long as spout pipe including demolition of existing floor , complete all as specified.

Preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coats of synthetic enamel paint o complete all as specified and directed.

Preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying one coats of oil bound distemper over and including 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed.

Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

Preparation of new plastered surfaces or un plastered, previously undecorated of walls and applying two coats of white wash, complete all as specified and directed.

Preparation of new plastered surfaces or un plastered, previously undecorated ceiling surfaces and applying two coats of white wash, complete all as specified and directed.

G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor /trenches including taking down old tubing complete all as specified and directed.

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors, including taking down old tubing complete etc all as specified.

G I tubing medium grade of 20 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor /trenches including taking down old tubing complete all as specified and directed.

Refixing old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors, including taking down old tubing complete etc all as specified.

G I tubing medium grade of 25 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor /trenches including taking down old tubing complete all as specified and directed.

Refixing old GI tubing 25 mm bore pipe and connections in new or old position as on walls ceiling floors, including taking down old tubing complete etc all as specified.

Brass Chromium Plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore, fixed in repair, complete all as specified and directed.

Brass Chromium Plated mixer for mixing hot & cold water , suitable for sink , screwed down for iron pipe and fixed 15 mm bore, fixed in repair, complete all as specified and directed.

Brass Chromium Plated centre hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore, fixed in repair, complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position , fixed in repair , complete all as specified.

Wash basins, Vitreous China (Flat white type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia , 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, fixed in repair, complete all as specified. Make: Cat Part No. 1008 of Cera or equivalent in makes mentioned in Appx 'C'

Stop valves , cast copper alloy, fancy type, chromium plated , screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Stop valves , cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Angle valve , cast copper alloy, chromium plated, fancy type, screwed down, high pressure , screwed oth ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.

Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed bore dia of pipe 20mm complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified.

Stainless steel plate rack of overall size 600mm x 600mm x 250 mm made of stainless steel having thickness 1mm, fixed with screws over , fixed in repair complete all as specified and directed.

Bib tap, cast copper alloy ,chromium plated, fancy type , screwed for iron pipe or for brass ferrule of 15 mm bore, fixed in repair complete all as specified and directed.

Bib tap, 15mm size , standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight- 90 grams) , fixed in repair , complete all as specified.

Pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, fixed in repair complete all as specified and directed.

Brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union , fixed in repair, complete all as specified and as directed

PVC valve less, snow white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. Make: Cat Part No.B1010112 of Cera or equivalent in makes mentioned in Appx 'C'.

600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers, fixed in repair, complete all as specified.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair , complete all as specified.

Corner glass shelf (medium) 225 x 225 mm (9” x 9”), fixed with chromium plated brass screws and cup washers , fixed in repair , complete all as specified.

Brass chromium plated tubular towel rail 20 mm dia, "D" type, 60 cms long between flanges fixed in repairs with and including chromium plated brass brackets, brass screws, fixed in repair , complete all as specified

Toilet paper holder with flat recessed type stainless steel , white, fixed in repair, complete all as specified.

Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent in makes mentioned in Appx 'C'

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc, fixed in repair all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx.

PVC connections 15 mm size with PTMT nuts of length 600mm fixed in repair complete all as specified and directed.

Rubber washer for stop cock, bib tap, pillar tap, gate valve of any type, fixed in repair, complete all as specified.

Brass spindle suitable for bib tap, pillar tap, angle valve of any type, fixed in repair, complete all as specified.

Peg stay for steel window , fixed in repair, complete all as specified.

32mm bore, Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, , fixed in repair, complete all as specified.

32mm bore, PVC waste pipe , 900 to 1000m long, suitable for WHB , fixed in repair, complete all as specified.

40mm bore, PVC waste pipe , 900 to 1000m long, suitable for sink , fixed in repair, complete all as specified.

32mm bore, Waste coupling , brass, chromium plated, with long screwed shanks and fly-nuts , flanged end bedded in red lead cement and other end fixed , fixed in repair , complete all as specified.

40mm bore, Waste coupling , brass, chromium plated, with long screwed shanks and fly-nuts , flanged end bedded in red lead cement and other end fixed , fixed in repair , complete all as specified.

Plastic water closet seat cover, white/cream colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pattern WC, fixed in repair, complete all as specified.

Plastic water closet seat, white/cream colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for anglo indian water closet, fixed in repair, complete all as specified.

Chromium plated ,jet hygenic spray for 15mm bore fitting with 1 to 1.5 metre long tube, acrylic type , fixed in repair, complete all as specified.

Door seal (Snake Guard) with powder coated aluminium frame work , suitable for 900 to 1000 mm door opening , fixed in repair, complete all as specified.

110mm dia PVC(SWR) pipe single socketed with rubber ring joints, fixed to wall ,fixed in repair complete all as specified and directed.

75mm dia PVC(SWR) pipe single socketed with rubber ring joints, fixed to wall ,fixed in repair complete all as specified and directed.

110 mm dia PVC(SWR) bend, any radius complete all as specified and directed.

75mm dia PVC(SWR) bend, any radius complete all as specified and directed.

110mm bore PVC(SWR) vent cowl, complete all as specified and directed.

75mm bore PVC(SWR) vent cowl, complete all as specified and directed.

110mm bore , PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

75mm bore , PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

Jointing only cast iron pipes and fittings or AC pipes and fittings, 75/100mm bore, in repairs, with cement joints, complete all as specified and directed.

Jointing only cast iron pipes and fittings or AC pipes and fittings, 75/100mm bore, in repairs, with Lead joints, complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore pipe, complete all as specified.

Towel Ring roung with roung flange of brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats, fixed in repair , complete all as specified.

Chromium plated grating ,with or without hole, , fixed in poistion with cement, fixed in repair, complete all as specified.

15mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -142gms) , fixed in repair, complete all as specified.

20mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -210 gms) , fixed in repair, complete all as specified.

25mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -210 gms) , fixed in repair, complete all as specified.

PVC Water tank lid , thread type with ring fittted with nuts and bolts , suitable for 500 and 1000 litre capacity of tanks , fixed in repair, complete all as specified.

Stainless steel soap dish, fixed with chromoum plated brass screws , fixed in repair, complete all as specified.

Welding in repairs not exc 2.5cm in length for thickness of metal not exc 6mm, complete all as specified. Note : The rates include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required,

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. , for tanks exc 250 and not exceeding 500 litre capacity , at any height and location, complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. , for tanks exc 500 and not exceeding 1000 litre capacity , at any height and location, complete all as specified.

Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line , including dismantling old tank complete all as specified.

Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line , including dismantling old tank complete all as specified.

75mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified.

100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified.

75 mm bore Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified.

100 mm bore Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified.

Cast iron cap/cover , fixed with nuts and bolts including rubber packing for oval access door bends of 75mm bore, complete all as specified.

Cast iron cap/cover , fixed with nuts and bolts including rubber packing for oval access door bends of 100mm bore, complete all as specified.

Disconnecting existing tanks 500 Litres Capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as specified.

Disconnecting existing tanks 1000 Litres Capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as specified.

Syphon kit assembely, complete for flushing cistern , fixed in repair , complete all as specified.

Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern , fixed in repair , complete all as specified.

110mm PVC (SWR) WC connector with lip ring, jointing with solvent cement , fixed in repair , complete all as specified.

75mm bore , PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified.

Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), 75mm dia , complete all as specified.

Cast iron nanhi trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), 75mm size, complete all as specified.

PVC bathroom cabinet of size 50cmx41cm with hinged door an locking arrangement with built in shelves and looking mirror fixed in cabinet door and fixed to wall as per manufacturers instruction as in repairs complete all as directed.

Plain cement concrete 1:3:6, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).

Preparation of old plastered surfaces or un plastered, previously undecorated ceiling surfaces , and applying one coat of white wash, complete all as specified and directed.

Cleaning of blockage of WC indian or European type by removing of all the mud/sludge and getting out including cleaning of SGSW or CI pipe upto First manhole and depositing the sludge in a pit of suitable size at a distance not exc. 50 meters from the WC and covering the same with the soil obtained from excavation of pit including all excavation and earth work of pit complete all as specified and directed. (The quoted rates includes for keeping particular WC under taken once for cleaning, functional for full contract period)

Cleaning of blockage of bathroom/kitchen by cleaning the Nahani traps/gully traps of all the mud/sludge and getting out, washing thoroughly grating of trap, CI waste pipes by opening the clearing eyes and depositing the sludge in a pit of suitable size at a distance not exceeding 50 meters from the gully trap and covering the same with the soil obtained from excavation of pit including all excavations and earthwork of pit complete all as specified and directed. (The quoted rate includes for keeping particular bathroom/kitchen undertaken once for cleaning functional for full contract period)

Removing the manholes covers (CI or RCC) any type of manholes rectangular/circular and de-sluding/de-watering of septic tank and soakage well of any size and depth by mechnical pumping by plugging inlet as required, making it fully functional to the entire satisfaction of Engr-in-Charge including carrying the effluent and re-instating the manholes cover to its original position dispositing of sludge obtained outside defence land as per Civil authoritites norms complete all as specified and directed. (The quoted rates includes for keeping the particular septic tank and soakage well undertaken once for de-sludging/de-watering fucntional for full contract period)

Cleaning of existing sewage pipe lines 10mm/150mm/200mm internal dia at any depth including manholes by removing the manhole covers of any type/size and cleaning by means of hydraulic jet pressure machine manually as required at site from manholes and well flushing with water after cleaning including getting out sludge if any and liquid materials from connecting manholes deposited in sewage line removing the solids and sludge to any distance and covering the same in pit, excavation, returning filling and removal includes in the rate quoted and reinstating the manhole cover to its original position (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line which is undertaken once for cleaning, functional for full contract period) complete all as specified and directed.

Switch piano flush type, single pole, one way, 5 Amps, fixed in repair , complete all as specified.

Switch piano flush type, single pole, 15 Amps, fixed in repair , complete all as specified.

Socket outlet, 2 in 1, 3 pin, 5 Amp flush type, fixed in repair , complete all as specified.

Socket outlet, 2 in 1, 5 Pin, 5/15 Amp ,flush type, multipurpose, fixed in repair , complete all as specified.

Switch socket combination 2 in 1, 6A flush type, fixed in repair , complete all as specified.

Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, fixed in repair , complete all as specified.

Modular switch 1 way 6A, 1 module, fixed in repair , complete all as specified.

Modular switch 1 way 16A, 1 module, fixed in repair , complete all as specified.

Modular Bell push 6A 1 module, fixed in repair , complete all as specified.

Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, fixed in repair , complete all as specified.

Modular fan regulator, step type, 2 module, fixed in repair , complete all as specified.

Modular Socket, 6A - 2/3 pin combined 2 module, fixed in repair , complete all as specified.

Socket 6A/16A - 2/3 pin combined , 2 module, fixed in repair , complete all as specified.

Modular Switch socket Combination 6A, 5 pin, 3 module fixed in repair , complete all as specified.

Modular Switch socket Combination 16A, 6 pin, 3 module fixed in repair , complete all as specified.

Buzzer, Ding Dong AC. 230 volts, single pole, fixed in repair , complete all as specified.

Lamp holder, PVC/Polycarbonate type with back plate suitable for angular/ batten fittings , fixed in repair , complete all as specified.

Single pole and neutral enclosure with a two pin and earth plug and socket , 240 Volts, complete with one single pole MCB 20 Amp double pole, fixed in repair , complete all as specified.

Single core PVC cable 1.5 sqmm, multistranded copper conductor, FRLSH, PVC insluated and unsheathed cable of 1100 volts grade, fixed in repair , complete all as specified.

Single core PVC cable 2.5 sqmm, multistranded copper conductor, FRLSH, PVC insluated and unsheathed cable of 1100 volts grade, fixed in repair , complete all as specified.

Single core PVC cable 6 sqmm, multistranded copper conductor, FRLSH, PVC insluated and unsheathed cable of 1100 volts grade, fixed in repair , complete all as specified.

MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C curve fixed in repair , complete all as specified.

MCB SPN 32, 240 Volts, 10 KA, C curve fixed in repair , complete all as specified.

MCB TPN 63 Amps , 415 Volts, 10 KA, C curve fixed in repair , complete all as specified.

MCB TPN 100 Amps , 415 Volts, 10 KA, C curve fixed in repair , complete all as specified.

Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 8 way, double door, 240 volts with 200 Amp rated bus bar, fixed in repair , complete all as specified.

Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 4 way, double door, 240 volts with 200 Amp rated bus bar, fixed in repair , complete all as specified.

Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 10 watt LED,6500k, tube rod with all acessoreis internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed. Make: Havell's Cat Part No. LHEXACP7IN1W010 of "Havells" or equivalent in makes mentioned in Appendix

Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. 1x20W, 6500K ,230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed. Make: Havells cat part No. LHEXAWP7IN1W020 or equivalent in Appx

PVC casing caping of size 38mm, ISI marked, fixed in repair , complete all as specified.

Rigid non-metallic PVC conduit of size 20mm, wall thickness 1.8mm, ISI marked, fixed in repair , complete all as specified.

Rigid non-metallic PVC conduit of size 15mm, wall thickness 1.8mm, ISI marked, fixed in repair , complete all as specified.

Hylum sheet, 3mm thick of size , 9"x11", incluidng cutting if sheet for fixing of switch/socket, fixed in repair , complete all as specified.

Hylum sheet, 3mm thick of size , 10"x5", incluidng cutting if sheet for fixing of switch/socket, fixed in repair , complete all as specified.

Notes for All items of BOQ : Rate quoted above all items inclusive provision as under : (A) Making arrangement for establishment of centralized complaint centre in a building authorized by Engr-in-Charge upto the contract period with following arrangement :- (a) Infrastructure required in Complaint Cell i.e. telephone, furniture, stationary, transport and other necessary items/ materials to establish a new complaint centre able to receive and manage complaints from the users by all means i.e. Manual Complaint Mechanism, Telephonic Complaints Mechanism, SMS Complaint Mechanism and e-mail Complaint Mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as 10+02 or equivalent in any discipline with minimum 6 month certificate course of computer applications (from a Govt recognized institute). (c) Provision and maintenance of all tools, plants, equipment and safety gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before closing of office. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and rank of complaint and exact nature of complaint and mobile No/ telephone. (j) On Lodging the complaint, the Complaint No will be assigned for reference. Also system will indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip will be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/ store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen.

(k) On both copies of complaint slips, status of the complaint attended shall be endorsed by the complaint/ user. Once copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, reasons for not attending, probable time required for attending the pending complaint etc. (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least twice a week and GE at least once a weak to check the effiency of the system and record their remarks accordingly. (B) Contractor shall also be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department. (iii) A computer/ PC system with internet connection for the complaints lodging and supervising will be provided by the Contractor and will not be paid separately. (iv) Space for complaint cell/ office store will be provided by the department and for any security Beach/ Theft Activity department will not be responsible. Contractor have to arrange all security measures .

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 33 of tender doucments.

kailu construction co (BID ID -3389876)

Eshaan Construction Co. (BID ID -3389473)