2024-2025 Chettarikkal Link road club road construction in ward 12

Amount

Road Construction

3.15.1:Compacting Original Ground <br> (i) Compacting original ground supporting embankment <br> Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1.

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii) Using Gravel mix soil.

OD214252/2024-2025:Supplying and laying interlocking cement concrete paverblock tiles 80mm or nearest size , thickness minimum strength M40 conforming to IS 15658;2006 for medium traffic Low volume roads including providing a layer of 6mm aggregates for 5mm thickness , then laying interlock cc paver block lines and levels as per the directions of the departmental officers at site inclusive oa all cost &amp conveyance charges ETC.Complet

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

3.5.2:Excavation in Soil with Dozer with lead upto 100 m <br> Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

OD313988/2024-2025:Steel work using tubular section welded in built up section including all cost of materials labour,convayance,,priming coat etc. complete

OD316741/2024-2025:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

JIBIN JACOB (BID ID -2070900)

Bidder Name

JIBIN JACOB

GANGADHARAN V K