Providing Furniture Arts & Commerce College at Vanthali Dist.Junagadh

NAME OF WORK :-Providing Furniture Arts & Commerce College At Vanthali Dist- Junagadh

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

1 260.00 Class Room Bench 6039.80 Nos

Providing and fixing 3-Seater Student Bench — Providing, fabricating, and supplying 3-seater

classroom bench and desk set for students, including frame made of Mild Steel (MS) tubular sections,

powder-coated for rust resistance; desk and seat made of high-quality pre-laminated particle board /

plywood / MDF with laminated top finish; seat size approx. 1500 mm (L) × 300 mm (W) × 450 mm

(H); backrest height approx. 250 mm above seat level; desk height approx. 750 mm; all edges

finished with 2 mm PVC edge banding; frame powder-coated (40–60 microns) in black or grey;

rubber shoes at leg ends; complete with all accessories, welding, fixing in position, and finishing — all

complete as directed by the Engineer-in-Charge.

2 40.00 Visitor Bench 12892.65 Nos

Supplying and placing Fixed Chair – Stainless Steel 3-Seater, made of SS 304 grade 1800mm long

with perforated/solid seat and back, mounted on tapered tubular SS frame, duly polished, complete

with all fittings, accessories, loading, unloading, transportation, placing at all floors and all leads, as

per approved design, drawing, make (Happy Arms or equivalent), and as directed by the Engineer-in-

3 10.00 Plain Steel Table 18816.30 Nos

Providing and fixing table top made of 25 mm thick MDF board with 1 mm laminate finish on top

surface and 2 mm PVC edge-banding on all exposed edges. Under-structure consisting of 100 mm ×

100 mm SS 304 square pipe (centre support) and 50 mm × 25 mm × 1 mm thick SS 304 rectangular

pipe for the top frame. Base size 600 mm × 600 mm fabricated from 12 mm thick M.S. plate, fully

covered with 1 mm thick SS 304 sheet in matt finish. Work to include all materials, fabrication,

transport, loading/unloading, installation, fixing as per approved drawing and direction of the

Engineer-in-Charge.

4 15.00 Office Table Big Steel Table 27434.63 Nos

Supplying, fabricating, and fixing a large office table(2400 mmx 1000mmx750mm) with sturdy steel

frame and laminated tabletop. The table shall be suitable for executive or conference use, combining

durability and ergonomics. The structure shall include MS/SS frame, laminated MDF or plywood top,

and appropriate finishing. Work includes all materials, fabrication, welding, polishing, transportation,

and installation, as per approved drawings and instructions of the Engineer-in-Charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

5 30.00 Revolving Chairs 7665.90 Nos

Revolving Chairv: Providing and Fixing Cushioned Seat & back, PP outer back cover, PP arms, Single

back lock, Push back mechanism, gas lift for seat height adjustment, five prong Nylon base with twin

wheel nylon castor.Including all materials and labour etc.Complete as per drawing and instruction of

engineer-in charge.Size : Max.Hight 1020mm Min.Height 930 mm,Seat : 500mm x 460mm ,Back:

500mm x 440 mm Medium Back Chair.

6 20.00 Office Cup Board 15796.40 Nos

Supplying, fabricating, and fixing an open office cupboard (1200mmx450mmx2000mm) suitable for

storing books, files, and stationery for Staff. The cupboard shall be sturdy, durable, and aesthetically

finished, with adjustable shelves for flexibility. Work shall include all materials, fabrication,

polishing/laminate finishing, hardware, installation, as per approved drawings and instructions of

the Engineer-in-Charge.

7 10.00 Locker cabinets 13241.10 Nos

Metal cupboard with storage :

Supplying and installing Cupboard:

size: 900mm x 900mm x 400mm Welded Construction 0.8 mm thk (±0.08mm) CRCA* for Structure

(22 guage) 0.8 mm thk (±0.8mm) High yield strength CRCA** for door (22 guage)

CRCA D grade as per IS:513 CRCA D grade high yeild strength as per IS : 513 Locking : Three way

locking mechanism with shooting bolt

Shelving : Height wise fixed shelf mounting

Uniformly Distributed Load Capacity per each full shelf is 40 Kg. maximum 3 nos. of adjustable full

Box file A4 size (85W x 345H x 285D) can be stored vertically on three shelves and the clear space

above fourth shelf is 240mm.

Leveler :M10 screw type leveler with hex plastic base Finish : Epoxy powder coated to the tickness of

50 microns (±10). Work complete including all necessary hardware , fittings , mock up sample,

loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in

item description. Complete as per Drawing and intrusction of Engineer - in- charge

8 20.00 Library Table :- 21603.90 Nos

Supplying, fabricating, and fixing a 6-seater library table (2400 x 900 x750mm) suitable for reading,

studying, and using laptops or books. The table shall be sturdy, durable, and ergonomically designed

for students or staff. The design shall ensure comfortable seating for six persons, with sufficient

legroom, cable management (optional), and a smooth working surface. Frame Powder Coated MS Bar

Top 25–30 mm MDF/plywood The table shall combine a laminated MDF/plywood top with a MS/SS

tubular frame for durability Partition at Middle in table As Directed Engineer in charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

9 80.00 Library Chairs :- 4878.30 Nos

Supplying and placing Fix Chair with Seat. as per approved and selection by Engineer In Charge.

Make: Happy Arms or equivalent make as per approved make list. tapperd Legs at the base duly

Work complete including all necessary Solid Teak wood Strcture , polish , hardware and fittings

mock up sample, loading,unloading, transportation, placing at all floors and for all leads, all

accessories as described in item description. Work complete as per the detailed drawing and

instruction of EIC.

10 25.00 Books Glass Cupboard 19280.90 Nos

supplying and installing 5-part Library Cupboard, made of 20-gauge CRCA sheet, welded

construction, each compartment with individual door and three-way shooting bolt lock,

fixed/adjustable shelves with 40 kg capacity per shelf, M10 screw-type levelers, epoxy powder-

coated finish (50 ± 10 microns), complete with all hardware, fittings, fabrication, transportation,

loading/unloading, installation at all floors, as per approved drawing and Engineer-in-Charge

Dimensions: Overall approx. 1500 mm (W) × 500 mm (D) × 2000 mm (H); compartment width

approx. 220–300 mm each.

11 10.00 Books Glass Cupboard 22300.80 Nos

supplying and installing 5-part Library Cupboard, made of 20-gauge CRCA sheet, welded

construction, each compartment with individual door and three-way shooting bolt lock,

fixed/adjustable shelves with 40 kg capacity per shelf, M10 screw-type levelers, epoxy powder-

coated finish (50 ± 10 microns), complete with all hardware, fittings, fabrication, transportation,

loading/unloading, installation at all floors, as per approved drawing and Engineer-in-Charge

instructions. Dimensions: Overall approx. 1500 mm (W) × 500 mm (D) × 2000 mm (H)

12 20.00 Computer Table 14867.20 Nos

Computer Table : 1200 x 750 x 750 mm, Providing and fixing table unit consist main table, side table

,back storage with pedestal unit with all necessary accessories keyboard, CPU stand ,cable manager,

modesty panel etc with all required necessary accessories. All finishes laminate,powder coating

/anodizing shade shall be approved by Engineer In charge. Rate shall inclusive of mock up sample

providing and fixing at site of unit for approval of Engineer In charge. Pedestal Unit: @400mm(W) x

450mm(D) x 725mm(H) top:- Made of 25mm thick E1 grade pre-laminated particle board / Post

Laminate as per Engineer In charge Selection. Exposed Edges from matching PVC Edge Banding from

Rehau / Equivalent Body:- Made of 18mm thick E1 grade pre-laminated particle board with Drawer

= 400W + 1 Filing drawer pedestal,and aluminum finish Thin profile Handle as per selection + lock

and keys. The drawer box is fitted with telescopic chanel from hettich or haffle equivalent make for

free movement. Work complete including all necessary hardware and fittings , mock up sample,

loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in

item description. Work complete as per the detailed drawing and instruction of Engineer In charge

Work complete including all necessary hardware and fittings , mock up sample, loading, unloading,

transportation, placing at all floors and for all leads, all accessories as described in item description.

Work complete as per the detailed drawing and instruction of Engineer Incharge

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

13 20.00 Revolving Chairs 7433.60 Nos

Supplying and fixing medium-back revolving computer chair with cushioned seat and back, PP outer

back cover, PP armrests, gas-lift seat height adjustment, single back lock with push-back mechanism,

360° swivel, five-prong Nylon base with twin-wheel castors. Size: Seat 500 × 460 mm, Backrest

500 × 440 mm, Max height 1020 mm, Min height 930 mm. Work includes all materials, fittings,

assembly, transportation, and installation as per approved drawing and Engineer-in-Charge

14 40.00 Table laminated size:- 1800 x 900 x 750mm 18816.30 Nos

table unit : Table top : 1800 x 900 x 750mm, Side Unit - 400 x 450 mm, Pedestal Unit-400x470X545.

Providing and fixing table unit consist main table, side table , with pedestal unit with all necessary

accessories keyboard, CPU stand ,cable manager, modesty panel etc with all required necessary

accessories. All finishes laminate,powder coating /anodizing shade shall be approved by Engineer In

charge. All Table top : 50 mm thick postfoam top (reverse bull nose) with 1 mm thick Laminate finish

as per approved make and sample by Engineer In charge. Verticle support: comprising from IS

BWR ply with both side finish with 1 mm thick VNR Laminate . Wire management: Raceway :one

way or two way openable flip top box mounted on table top squezze : All the exposed edges are

sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia

are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The

drawer box is fitted with telescopic channel Hettich or Haffle make for free movement. The drawer

unit is provided with central locking system, SS 304 recessed handles are provided . The drawer unit

is fitted on castors (optional) for easy mobility. The complete furniture unit is factory assembled with

knock down fittings.Rate shall inclusive of mock up sample, all materials, loading, unloading,

transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in

item description. Work complete as per the detailed drawing , mockup sample and instruction of

Engineer In charge Equivalent to VNR Series Laminate.

15 1.00 High Back Chairs :- 24391.50 Nos

Principal chair : Providing and Fixing PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) Sigma

chrome Base with Knee Tilt Synchro Mechanism with Any Position back Lock, Seat & Back - Made

from High Density U - FOAM, Armrest in two pieces 12mm outer boire cut veneer polyurathine High

gloass & 6mm hot pressed plywood upholstered pad which fix with seat .Including all materials and

labour etc.Complete as per drawing and instruction of engineer-in charge.Size : max.Height :

mm to Min. 1200mm, Seat : 660mm x 660mm ,back 510 mm x 600 mm , Model : HOF - Molto

High Back Chairs

16 10.00 4 Parda Rack 28108.30 Nos

supplying and installing 4-part Library Cupboard, made of 20-gauge CRCA sheet, welded

construction, each compartment with individual door and three-way shooting bolt lock,

fixed/adjustable shelves with 40 kg capacity per shelf, M10 screw-type levelers, epoxy powder-

coated finish (50 ± 10 microns), complete with all hardware, fittings, fabrication, transportation,

loading/unloading, installation at all floors, as per approved drawing and Engineer-in-Charge

Dimensions: Overall approx. 1500 mm (W) × 500 mm (D) × 12000 mm (H); compartment width

approx. 220–300 mm each.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

17 2.00 Big Key Stand For Locker 13473.40 Nos

Supply, installation, and commissioning of 8-door staff locker cabinet made of MS (CRCA) steel,

overall size 1000 mm (W) × 450 mm (D) × 2000 mm (H), fabricated from 0.8 mm thick MS sheet

(body) and 1.0 mm thick MS sheet (doors), powder coated with epoxy polyester finish (minimum

micron). Each locker provided with individual lock and key, ventilation louvers, and label holder on

each door. The cabinet shall be of welded construction, complete with internal shelves/partitions as

per 8-door configuration and ready for use at site. As per Directed Engineer in charge.

18 3.00 Magazine Riding Stand 5575.20 Nos

Supply and installation of Metal Newspaper Reading Stand, overall size 1000 mm (W) × 400 mm (D)

× 1300 mm (H), fabricated from mild steel tubular sections with sloping MS sheet top and 4–6 MS

rods for newspaper holding, powder coated (minimum 50 micron), complete with rubber shoes and

all accessories, as directed Engineer in charge.

19 2.00 Magazine Stand 4622.77 Nos

Supply and installation of Metal Magazine Stand, size 635 mm (W) × 361 mm (D) × 1473 mm (H),

fabricated from MS tubular frame (25×25×1.2 mm) and CRCA MS sheet shelves (1.0 mm thick) in 4–5

inclined tiers, powder-coated finish (minimum 50 µm), with rubber shoes and all accessories

complete as directed. As per directed and Approved by Engineer in charge.

20 2.00 Center Table Teak wood : size - 900mm x 600mm x 450mm 7433.60 Nos

Center Table teak wood: size - 900mm x 600mm x 450mm : Providing and Fixing Center table made

from 37mm x 37 mm Indian teakwood leg and top frame made from 37mmx 75mm Indian teakwood

having 18 mm thick Ply and 4mm thick Veneer with melamine polish and 0.8mm thick balancing

laminate at bottom for shelf made with surrounding Indian teakwood frame of size 37 mm x 12 mm.

The top having 12 mm thick glass with edge finish to be placed properly in groove made. Surface to

be finished with melamine polish including all materials and labours etc. complete as per drawing

and instruction of engineer-in charge.

21 14.00 White Board ( 4 x 12 ) 10221.20 Nos

Supply and installation of whiteboard, size 12 ft × 4 ft (3658 mm × 1219 mm), with enamel-coated

steel or laminated dry-erase surface, 6–8 mm thick, anodized aluminium frame 25–30 mm wide with

corner caps, marker tray, wall mounting complete with all materials, labor, and fixtures as per site

requirements and instructions of Engineer-in-Charge.

22 5.00 Notice Board ( Locable ) 3252.20 Nos

providing & fixing Notice board having 9mm soft board as a core material 1mm laminate sheet as

back material and surface of 1.mm felt cloths, having profile of heavy aluminium fluted anodized

profile 10 to 12 micron of 18 to 25 thick board C channel and corner is made up of melded virgin ABS

grey colour hanging vertical and horizontal hanging facility as per selected colour & size including all

necessary fixture , faster, fitting, labour material machinery etc complete as selected and directed by

engineer in charge . Approved make: Notice Board size 900mm x 1200mm

23 4.00 Green Board ( 4 x 12 ) 7898.20 Nos

Supply and installation of Green Chalk Board, size 12 ft × 4 ft (3658 mm × 1219 mm), with 6–8 mm

chalkboard panel, anodized aluminium frame 25–30 mm wide with corner caps, bottom chalk tray,

wall mounting complete with all materials, fittings, fasteners, labor, and as per instructions of

Engineer-in-Charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

24 4.00 Green Board ( 4 x 8 ) 5575.20 Nos

Supply and installation of Green Chalk Board, size 4 ft × 8 ft (1219 mm × 2438 mm), with 6–8 mm

enamelled steel/synthetic board, anodized aluminium or hardwood frame 25–30 mm wide, corner

caps, bottom chalk tray, wall mounting complete with all materials, fittings, fasteners, and labor as

per Engineer-in-Charge instructions.

25 2.00 Green Board Small ( 4 x 6 ) 3600.65 Nos

Supply and installation of Green Chalk Board, size 4 ft × 6 ft (1219 mm × 1829 mm), with 6–8 mm

enamelled steel or synthetic board, anodized aluminium or hardwood frame 25–30 mm wide, corner

caps, bottom chalk tray, wall mounting complete with all materials, fittings, fasteners, and labor as

per Engineer-in-Charge instructions.

26 4.00 Wooden Podium 24623.80 Nos

Providing, Supply & install wooden podium with built-in microphone holder, made of

moisture-resistant pre-laminated MDF or teak plywood with edge-banding, reading surface slope

approx. 15°, dimensions approx. 600 mm (W) × 500 mm (D) × 1100 mm (H), with cable-management

provision and lockable storage shelf. Finish in institutional colour as per directed Engineer in charge.

27 300.00 Plastic Chair 1115.04 Nos

Supply & install heavy duty plastic chair for college classrooms/auditorium, injection-moulded

high-impact polypropylene body, load capacity minimum 125 kg, overall size approx.

585 mm (W) × 550 mm (D) × 775 mm (H) (±10 mm), seat size approx. 550 mm × 430 mm, seat height

approx. 470 mm, colour as per institution, stacking capability where applicable, delivered fully

assembled As per Directed Engineer in Charge.

28 1.00 Trolly 11150.40 Nos

Providing & Fixing fabricated trolly of size 36” x 18” x 34” ht. with goods carriage capacity of 250kg.

made up from 40 mmx 40 mm 16 guage M.S. pipe with 16G sheet having 1" 16 uage CRC ROUND

PIPE and whole unit is covered with MS round bar mesh including epoxy polymer powder coating

micron thick with 100 mm nylon castor at bottom for smooth movement including all fixtures

fasteners , labour , material etc comp. as seletced and diretced by Engineer Incharge.

29 3.00 3 Seater Sofa :- Model Size:- 2100 X 870 x 800mm 42208.91 Nos

Sofa : Three seater ( Suite room) : 2100 (L) x 870 mm (B) x 800 mm (H) comprising of Solid teak

wood with PU semi gloss finished polish. The seat shall 150 mm th 40 density & back shall be

density foam & finished in Approved fabric upholstery as per the drawing/image and instruction

from Engineer In charge/EIC all external & internal exposed woodwork to be finished in PU semi

gloss finish polish. .The work shall be done as per the drawing , specifications, sample approved and

as directed by the Engineer In charge and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all

heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill

Engineer In charge's design intent. No additional claims will be entertained for this.Rate shall

inclusive of providing mockup sample for approval of Engineer In charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

30 3.00 1 Seater Sofa :- Model Size:- 1100 X 870 x 800mm 22533.10 Nos

Sofa : 0ne seater ( Suite room) : 1100 (L) x 870 mm (B) x 800 mm (H) comprising of Solid teak wood

with PU semi gloss finished polish. The seat shall 150 mm th 40 density & back shall be 32 density

foam & finished in Approved fabric upholstery as per the drawing/image and instruction from

Engineer In charge/EIC all external & internal exposed woodwork to be finished in PU semi gloss

finish polish. .The work shall be done as per the drawing , specifications, sample approved and as

directed by the Engineer In charge and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all

heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill

Engineer In charge's design intent. No additional claims will be entertained for this.Rate shall

inclusive of providing mockup sample for approval of Engineer In charge.

31 15.00 Relax Chair 4413.70 Nos

Foldable mild-steel recliner chair in black with five adjustable positions, portable and space-saving

design suitable for relaxation approved by Engineer in Charge having size Depth (front to back)~

94 cm (some say 89 cm)

Width (side to side)~ 65 cm

Height (upright)~ 112 cm (alternate listing ~107 cm)

Item weight (chair itself)~ 12 kg (in one listing)

Maximum user / load weight~ 200 kg (in some mentions)

32 1.00 Wheel Chair :- Model 9059.70 Nos

Providing & Fixing Wheel chair for Physically Handicapped person having. Dimension 790 (L) X

(W) X 70 (H)MM . WITH FOLDABLE FRAME Structure made of carbon steel section 22 x 1.2 mm. A3

carbon sheet with Crome finish cross bars made of A3 carbon Steel material with section 25.4 x

1.2mm , 24 inch solid mag wheels with alloy in the in the rim, hand rim of section 16 x 1.2 mm .

carbon steel with chrome finish, front wheel of 8 inch hub made of PA polymer and outer side of solid

rubber pu moulded armrest & base made of abs , leather finish calf rest and seat with cushion

aluminium footrest with with uptown movement having extended base foot rest with moulded

plastic including handbrakes & full structure is anti rust chrome finish with user capacity of 100kg.

Including all necessary fixture, fatser,fittings, labours materials machinery etc complete as selected

and directed by engineer in charge

33 1.00 Stage Table 30431.30 Nos

Providing and fixing a single-side seating arrangement table of size 6000 mm (L) × 750 mm (W) ×

750 mm (H), suitable for 10 persons, made of pre-laminated MDF top with powder-coated mild-steel

frame, complete with all fittings, accessories, and finishing as directed by the Engineer-in-Charge.

34 10.00 Stage Chair 6504.40 Nos

Providing and placing a medium revolving chair with cushioned seat and back, height-adjustable

mechanism, 360° revolving base with five nylon castors, suitable for staff or stage seating in

conference hall, complete with all accessories and finishing as directed by the Engineer-in-Charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

35 12.00 Psychology Lab - Big Cup board 14867.20 Nos

Providing and fixing a steel laboratory cupboard size (1980 mm x 900 mm x 450mm) with visible

front side, lockable double doors, made of CRCA mild steel sheet with powder-coated finish, having

adjustable shelves, suitable for storing laboratory materials and files, complete with all fittings and

accessories as directed by the Engineer-in-Charge.

36 12.00 Psychology Lab - Table For Storage Area 10685.80 Nos

Providing and fixing a storage work-table of size 1200 mm (L) × 750 mm (W) × 900 mm (H), top

laminated; under-bench storage incorporating four small drawers and one large storage box,

powder-coated finish, complete with all fittings, handles, locks (where applicable), and installation as

directed by the Engineer-in-Charge.

37 50.00 Psychology Lab - Sitting Stool 1277.65 Nos

Providing and fixing a student stool with mild-steel fabricated frame and solid wooden seating

surface, powder-coated finish, suitable for use in laboratory / classroom environment, complete with

all fittings and installed as directed by the Engineer-in-Charge.

38 1.00 Big Table For Stage 29269.80 Nos

Providing and fixing a laminate finished work table of size 2000 mm (L) × 900 mm (W) × 750 mm (H)

with drawer storage units on both sides, top pre laminated, complete with all fittings, handles, locks

(where applicable) and installed as directed by the Engineer in Charge.

39 15.00 Computer Table 7665.90 Nos

Providing and fixing a computer table of size 1000 mm (L) × 600 mm (W) × 750 mm (H), with

laminated top, powder coated metal frame or pre laminated board structure, fitted with a sliding

keyboard drawer/keyboard tray, drawer storage and CPU space (where applicable), complete with

all fittings, handles, locks and installed as directed by the Engineer in Charge.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

I/We am/are willing to carry out the work at _______ % above/below percent (should be

written in figures and in words ) of the estimated rates mentioned above. Amount of my/our

tender works out as under.

*Estimated amount *Estimated amount

put to tender Rs._____________ put to tender Rs._________________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:-The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:-The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:-GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:-In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C Date:

11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5:-Credit amount of dismanteled material as per atteched statement Rs

TOTAL CREDIT OF will be deducted from First Running bill of Contractor

Signature of Bidder Executive Engineer