Stage contract of various works at Pahalgam

Engagements of JCB for excavation and execution of various works of various natures including disposal of excavated material upto all leads and lifts and carriage for avg 2kms as per the direction of engineer in charge

Engagement of tractors as and when required .

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, all leads and lifts as directed by engineer incharge -All kinds of soil

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil)

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil)

Disposal By Mechanical Transport including loading, unloading and stacking of excavated earth upto 1 KM

Supply and filling of RBM /Nallah muck for Stone soling or any backfilling or filling or any other work as directed of specified size including spreading, , ramming complete job

Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Berm)

Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete 10''

Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. 6''

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means).

Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.

Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation of each layer with PRR of 8 to 10 Tonne capacity including rolling on screening, dust and crushed stone including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE) 100mm compacted thickness

Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation of each layer with PRR of 8 to 10 Tonne capacity including rolling on screening, dust and crushed stone including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) 75mm compacted thickness

Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) 75mm compacted thickness

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.5Kg / Sqm ( on Bt surface surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete ( necessary test mandatory )

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications( necessary test mandatory )On bitumen/WBM/WMM surface @ 0.75 Kg/sqm.

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.With medium setting bitumen emulsionOn W.B.M. /W.M.M. @ 0.4 Kg/sqm.( necessary test mandatory )

P/L B.M using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equi pped with electronic sensor to the require d grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and d.e nsity, complete as per specifications and directions of Engineer-in-Charge :50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type HMP of 60-90 TPH capacity. incl. Cost and carriage of all materials involved.( necessary test mandatory )

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing

P/L SDBC using crushed stone aggregates of specified grading , pre-mixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped wilh electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire d compaction & density as per specification,complete and as per directions of Engineerin Charge:25 mm compacted thickness with Bitumen : VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2%(percentage by weight of Aggregate) prepared in Drum Type HMP of60-90 TPH capacity. incl cost and carriage( necessary test mandatory )

P/L of 6 mm thick seal coat of premixed fine aggregate(passing 2.36 mm and retained on 180 micronsieve) with bitumen using 128 Kg of bitumen of grade VG -10 per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including hot mixing of fine aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by mechanical transport up to the site of work, laying the mixed material with paver finisher to required level and grade rolling with road roller to achieve desired compaction including cost and carriage of all the material hire charges of machinery and all taxes etc. complete( necessary test mandatory )

Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4% carriage

P/L in position cement concrete in 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 4% carriage

P/L in position cement concrete in 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 4% carriage

P/L in position reinforced cement concrete in 1 : 2 : 4 (1 cement:2 course sand: 4 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. 4% carriage

P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. ( all works upto plinth level)4% carriage

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 4% carriage

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases for columns

Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc.

Suspended floors, roofings, landings, balcones and access plateform

50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete

40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete

25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete

12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete.

12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete.

15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete.

15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete.

Engagement of labour /Masdoor for one day for doing work as per direction of engineer incharge

Engagement of skilled labour with all machinary like cutters , welding machine etc for

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive

Clearance of slips disposal lead upto 50 m and lift upto 1.5 m. in ordinary soils disposal lead upto 50 m and lift upto 1.5 m.

in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.

In soils; mixed with Decomposed Rocks; by blasting or any other means

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

White washing with lime to give an even shade : Old work (two or more coats)

White washing with lime to give an even shade : Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. Old work ( One or more coats)

Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)kilometer stone as per standard design including finishing smooth in 1:3cement mortar ( 1cement : 3 fine sand) including the cost of earthwork, concrete in foundation, painting and lettering etc. .35x111x25 cm size. complete job.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth.

Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and synthetic paint. all complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer and synthetic paint..M.S. tube

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer and synthetic paint.G.I. pipes

Supplying/fixng of polygonal/RR masnory 2nd class quarry stone from approved source in dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job

Supplying/fixng of boulder stone of approved size by site incharge in dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job

Providing and fixing of PVC pipes Type -B material s weep hole or as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 4" dia

Providing and fixing of PVC pipes Type -B material as weep hole or as required at siteincluding all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 3" dia

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm

P/F of angle section, flats hollow section etc of structural steel of standard make including primer coat and paint and all carriage and loading unloading as and when required as per direction of engineer incharge etc complete job

Providing and fixing of imported wood panelling ready made of thickness 12mm incl wooden joists,12mm ply, polishing complete job

Providing corrugated High Rib Color Coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m

Providing corrugated CGI sheet roof including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing

PN-16 pipe, 16mm OD(SDR-7.4)

Supply and fixing of ply wood including cost of nails/screws etc. 6mm

Supply of PVC sheet 1mm

supply and fixing of Plain Galvinised sheets

Fixing of available timber planks including cost of nails etc

Dismembering of timber including stacking within a lead of 50mts

Fixing of available CGI sheets including cost of nails/hooks as per requirement

Dismembering of CGI sheets including stacking within a lead of 50mts

CARRIAGE (Mechanical transport) Carriage of timber through mechanical transport A)upto 5km per km

B)5 to 10kms (additional)

C)10 to 20kms (additional)

D)beyond 20kms(additional)

Carriage of steel/CGI through mechanical transport upto 5km per km

5 to 10kms (additional)

10 to 20kms (additional)

beyond 20kms(additional)

Carriage of bricks through mechanical transport upto 5km per km

5 to 10kms (additional)

10 to 20kms (additional)

beyond 20kms(additional)

Supply And Fixing Of popular wood

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately)

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used. With G.I. barbed wire

Temporary Electric Points incl wiring and all other allied items like holders,switches

P/f of 12 W led bulb incl wiring 1.5 sqm from switch board to bulb, 2.5 sqm wire from distribution box to switch board G.I box, Modular plate cover, MCB and all other allied aac, complete job

Providing and supply of LED Bulbs 22w

Hire charges for movable 2 seater toilet block including all accessories, fittings,disposal system etc including all carriges complete job

Braided Green Green Hose pipe 30m

Hiring Charges of Cutter

Hiring Charges of welding Machine

Hiring Charges of Generator

Supply of 3kv generator

P/F P.U.F sandwiched panels in walls with tongue and groove fitting: 40mm thick (size , color etc as recommended by engineer in charge) complete i/c all carriages incl soffit

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported wood

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes

P/F P.U.F sandwiched panels in walls with tongue and groove fitting: 75mm thick (size , color etc as recommended by engineer in charge) complete i/c all carriages incl soffit

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead

Providing And installation of high density polyethylene at different spots during rainy days (8 feet width)

Supplying/Installation of agro Net

Supplying and Installation of foldable bed as approved by EIC

Supplying of Executive table of standard dimensions and quality as approved by EIC

Supplying of Executive chair of standard dimensions and quality as approved by EIC

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand) Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) quarry

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. Quarry

Providing and fixing cupboard shutters with 25mm thick veneered particle board IS: 3097 marked exterior grade (Grade I) of approved make including second class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of engineer-in-charge With decorative veneering on one side and commercial veneering on other side

Nylon Rope of dia 20mm dia

Buckets

blanckets double

raincoats

umberllas

blanket single

Bibcock

Bibcock PTFE

angle valve

Showels

Pick Axe

Water Bottle

Juice Bottle

Biscuit

Detergent

Gas cyclinder

Gas burnier

Lunch for VIP per person

Chicken Mutton

Mutton

pressure cooker

water motor 01 horse power

Vegetables mix veg

Trekking shoes

trekking sticks

HEADLOAD of material using ponys/manual labour for an av. lead [email protected] PER KM PER BAG

SAND/BAJREE @RS.200 PER KM PER CUM STEEL TMT BARS

Steel TMT bars

COLOR COATED GS SHEETS

puf panels

P/F Cast iron as per required shape and sizes as per EIC

other construction material on pony

p/f Kent 20lts RO Kent guard water purifier as per EIC