REPAIR INCLUDING POLISHING PAINTING OF CERTAIN STEEL AND WOODEN FURNITURE OF OTM ACCN AT INF LINES AND BG LINES JAMNAGAR.

Amount

REPAIRS TO CHAIR DINNING OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Back support as specified in the drg

S&F 1 class Hard Wood stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIRS TO CHAIR DINNING WITH LONG BACK OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge

Front leg as specified in the drawing

Rear leg as specified in the drawing

Stiffeners as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density Make: Sleepwell/Kurlon/Coolfoam or higher than curlon with fabric (Superior Quality )fixed in repair on seat of 12mm thick ply Make of approved colour and quality

Back support as specified in the drg

S&F 1 class Hard Wood stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

REPAIRS TO TABLE CENTRE FD-274/29(M)/235

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade and 4 mm thick teak wood edging (inclu polishing of edging) all around for table top complete all as specified directed by Engineer-in-Charge.

Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

Taking out old unserviceable broken legs and S&F new legs of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.

REPAIR TO PEG TABLE FD 384

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Peg Table all as specified and directed by Engr-in-Charge.

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick BWP exterior grade of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Peg Table complete all as directed by Engineer-in-Charge.

Removing of old unserviceable long rail and S&F new long rail of 1st class hard wood (Teak Wood) as per existing shape and size to peg table complete all as specified and directed by Engineer-in-Charge.

REPAIR TO TEAPOY FD WOODEN FD-382

M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Teapoy all as specified and directed by Engr-in-Charge.

All as per srl item 5.01 here in before but long Rail/Stiffener/side rails

Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick BWP exterior grade including 4mm thick teak wood beading (incl polishing of beading) all around table top of Teapoy complete all as directed by Engineer-in-Charge.

REPAIRS TO BED PLYWOOD TOP FD-247 & FD-246

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

M & L for polishing of bed plywood top with french polish for obtaining glossy finish including preparation of wooden surfaces by scrapping with sand paper & apply putty whereever required and as directedby Engr-in-Charge.

Table 3'X2' or 900X600mm with / without Drawer FD-55/284/224/41(M)

S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

Table Dining 6 /8 Persons : FD-273, 239

S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.

Table Writing/Medium/Study : FD-249 &FD-275

S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood foot rest as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood stiffner as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F Sides of cabinet with 18mm thick ply wood BWP grade with 1.5mm thick lamination as per drg, all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short rail as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood front/long rail as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

S&F cabinet door with locking arrangement as per drg Including taking down old componant complete all as specified and as directed by Engineer-in-Charge.

Replacement of unserviceable veneer ply of cabinet i.e sides, back, front of cabinet with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.

Side Board : FD-241/371 /26(M)/MAP

Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.

Replacement of door shutter as shown in drg all as specified and as directed.

S&F 1 st class Hard Wood drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

Sofa set 5 seater with Arms Drg No. FD-258, 281, 373,CWE(B)FD/0607

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class Hard Wood front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class Hard Wood Batten of seat and back as per Drg.

Replacement of U/S 1 st class Hard Wood Arms as per Drg.

f) Replacement of U/S 1 st class Hard Wood front/rear/side rail of single seater of as per Drg.

g) Replacement of U/S 1 st class Hard Wood front/rear rail of 3 seater of as per Drg.

h) Replacement of U/S side rail of 3 seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

Sofa set 4 seater with Arms Drg No. FD-258, 281, 373

M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.

Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

S&F 1 st class Hard Wood front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

Replacement of U/S 1 st class Hard Wood Batten of seat and back as per Drg.

Replacement of U/S 1 st class Hard Wood Arms as per Drg.

f) Replacement of U/S 1 st class Hard Wood front/rear/side rail of single seater of as per Drg.

S&F Nylon Buffers shoes fixed in repairs.

Bin Linen Mulitpurpose : FD-2E6/MAP/09

Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.

Replacement of door shutter as shown in drg all as specified and as directed.

S&F 1 st class Hard Wood drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.

Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

Rack side Three spaces wooden WDE 27

S&F 1 st class Hard Wood Three Tray as per drg Including taking down old Tray complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood as shelf per drg Including taking down old Shelf complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Rear Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Front Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

Table 3'X3' or 600X600mm with / without Drawer FD-55/284/224/41(M)

S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.

Hat Stand with Mirror FD-233

S&F Mirror shall be of 6 mm thick approved quality , including taking down old mirror all as specified and as directed by Engineer-in-Charge.

Taking down old back ply and S&F 4mm thick commercial plywood all as specified and as directed

Taking down old front ply and S&F 4mm thick commercial plywood all as specified and as directed

Taking down old peg and S&F new pegs all as specified and as directed

Taking down old key hole and S&F new key hole all as specified and as directed

REPAIRS TO BED PLYWOOD TOP DOUBLE BED CWE/FD/0612

M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top Double Bed and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604

S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.

Table Dining 6 Persons 1500x900mm : CWE/IB/FD/0604

S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE OFFICER CLERK WOODEN

Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior grade of make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.

Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.

Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.

Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE CLERK WOODEN

Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior grade of make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.

Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.

Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.

Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.

REPAIRS TO CHAIR EASY WITH CUSHION

M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitabe for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken front legs and supply and fix new front leg made out of 1st class hard wood teak suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken side/front/back member of chair and supply and fix new side/front/back member made out of 1st class hard wood teak and provide 3mm dia holes at a spacing of 10mm to 12.5mm centre to centre along the length of member for the purpose of canning suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

M&L for removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.

S&F New Cushion 75mm thick 40 density with stitching with d in repair on seat of 12mm thick ply of approved colour and quality

Chair Dinning FD-69/228, 279 including

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

Chair Dinning FD-69/228, 279 PVC Seat

Removing old seat and S&F PVC Seat as per drg.

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

Chair Writing FD-280 /250/20

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

Removing unserviceable canning Patti and S&F new canning Patti as per existing and asper drg.

S&F 1st cl HW triangular bracket 60x60x25 mm as per drg, fixed in repair

S&F Nylon Buffers shoes fixed in repairs.

Chair Easy FD-229/17

M&L for removing unserviceable plastic cane from Seat and Back and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg . Taking down old can for seat and back and S&F nylon Canning as per drg.

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood front / rear rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back frame rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood side rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

h) Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.

S&F Nylon Buffers shoes fixed in repairs.

Chair WBB or BKB w/o arms FD-56, FD-285

Removing old seat and S&F new PLY Seat as per drg.

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.

g) S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.

S&F Nylon Buffers shoes fixed in repairs.

Stool Dressing CB FD-DB 6115 FD 27,252/282 including

M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

Stool 2' height wooden FD-DB 3923 Fd 51 including

&F 1 st class Hard Wood Top as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.ge and as shown on drg .

S&F 1 st class Hard Wood front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.

S&F 1 st class Hard Wood back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.

S&F Nylon Buffers shoes fixed in repairs.

REPAIR TO TABLE DRESSING GENTS Fd 07-04-2023 Taking sown old UNSV existing parts of table dressing Gents and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top shown on drg all as specified and directed by Engineer-in-Charge.

-do- but sides of 12mm thick particle board all as specified and directed by Engineer-in-Charge.

-do- but bottom of 12mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge

-do- but mirror of size 410x790 and 5.5mm thick make Modi Guard/Atul, all as specified and directed by Engineer-in-Charge.

One nob of aluminium anodized shall be provided to each drawer all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE DRESSING LADIES FD FD-251/378/278 Taking down old UNSV existing parts of table dressing ladies and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of top of table dressing ladies, Top shall be of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed all as specified and directed by Engineer-in-Charge.

-do- but sides of 19mm thick teak wood plank

-do- but bottom of 19mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge.

-do- but mirror of size 355x1220mm and 5.5mm thick make Modi Guard/Atul

-do- but leg of size 150x45x45mm

Back shall be 12mm thick particle board with commercial ply on both side.

side and back of drawer shall be of 12mm thick teak wook plank. Bottom of drawer shall be of 6mm thick commercial plywood. Front of drawer shall be 19mm thick particle board over which 1.5mm thick plastic laminated sheet is fixed 3mm thick teak wood edging shall be provided to all sides, front and edges of drawers, Teak wood vertical support out of 45mmx45mm provided the back of mirror all as specified and directed by Engineer-in-Charge.

Repair to Safe Milk and Meat FD-370 Taking sown old UNSV existing parts ofSafe Milk and Meat and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-

Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.

Replacement of door shutter with wire mess steel as shown in drg all as specified and as directed.

Top with 18/19mm thick ply wood on of approved shade with TW beeding as per drg.

S&F 1 st class Hard Wood Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.

S&F in Hasp ans staple as per drg.complete all as specified and as directed by Engineer-in-Charge.

Table bed side (Officers ) CWE(B)/FD/0605

a) Removing of existing unserviceable top and S&F with new top of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

b) Removing of existing unserviceable sides and S&F with new sides of 18mm thick prelaminated particle board (Both side laminated), exterior grade as shown in drg.

c) Removing of existing unserviceable back plywood and S&F with new back plywood 6mm as shown in drg.

d) Removing of existing unserviceable upper drawer and S&F with new upper drawer as shown in drg.

e) Removing of existing unserviceable lower drawer and S&F with new lower drawer as shown in drg.

f) Removing of existing unserviceable handle and S&F with new hadne as shown in drg.

h) Removing of existing unserviceable rubber shoe and S&F with new rubber shoe as shown in drg.

REPAIRS TO CHAIR DINNING OFFICER (DRG NO CWE()/FD/0611 M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.

Front leg as specified in the drawing

Rear leg as specified in the drawing

Front/back/ side rail as specified in the drawing

S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality

Back support as specified in the drg

S&F 1 class Hard Wood stopper 75x75x75mm as per drg fixed in repair

S&F new hard PVC shoe with screw & washer complete all as specified.

POLISHING OF WOODEN FURNITURE:- M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying French polish of approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge for the following items :-

Chair Dining (FD-269/279/228)

Chair Writing FD-280/261

Chair Easy FD-229/17(M)/201

Peg table FD-25/277/384

Table dining 8 pers FD-273/376/ 1115

Table dining 6 pers FD-273 /1115/274

Table dressing Gents with mirror FD-230`/291/294

Table writing/writing med FD-275/249/151

Teapoy FD-382/237/278/387

Table centreFD-274 /29(M)/235/375

Table Office clerk wooden DB-120

Table 3'X2' /900x600x760mm with/without drawer FD-231/223/234/284

Sofa Set 5 seater FD-281,FD/MAP/II/02

Sofa set 4 seater FD-281

Sofa Chair single seater FD-281

Table office officer wooden WDF-2973

Table 3'x3'/900x900x760mm FD-88/291

Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604

Table Dining 6 Persons 1800x900mm : CWE/IB/FD/0605

Rack Rifle wooden

Trestle store room wooden FD-86M

Table Dinning Ors wooden

motwani and associate

M/S Super Steel Works

PRAFUL ENTERPRISES

Dhangot Brothers

S t modi

M/S Badri Electicals