S.R. Work of Water Supply Line, Internal& External Colour Work and Main Gate at Sub Jail KADI. (Including Electrification) (Jail Priority Year 2026-27) (2nd Attempt) (SBD)

NAME OF WORK :- SPECIAL REPAIR WORK OF WATER SUPPLY LINE, INTERNAL& EXTERNAL COLOUR WORK AND MAIN GATE AT SUB JAIL KADI (INCULDING ELECTRIFICATION)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs. =

Estimated Rate [Rs. Ps.] Amount

Item No. Description of Item Quantity Unit

In Figure In Words Rs.

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

1 1,800.00 SMT 11.39 Rs. Eleven & Paise Thirty Nine Only

Removing and scraping of old deteriorated plaster of any thickness from wall/R.C.C member including stacking of serviceable material and disposal of Rs. Ninteen & Paise Seventy Two

2 unserviceable from site of work with all lead and lift 10.00 SMT 19.72

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of Rs. Seventy Five & Paise Ninety

3 pipe) 17.00 RMT 75.97

Demolition including stacking of serviceable materil a sand disposal of unserviceable materials with all lead and lift.(i)R.C.C.work Rs. Two Hundred Ten & Paise Forty

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter Rs. Two Hundred Ten & Paise Forty

5 lead.(A) Loose or soft soil (By Manual Labour) 11.00 CUM. 210.42

Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint (Two Coats) Shall be Of Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium

Emulsion of Asian Paint or Dulux Interior A 900 of Dulux Paint and manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand papered smooth With Applying two coats of Fine Putty Shall be of Bison

Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint & One coats of primer of BP White Primer of Rs. One Hundred Ninety & Paise

Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint and manufacture on new Ceiling / Slope Thirty Two Only

Surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing Walls with Plastic Emulsion Paint on Wall Surfaces (Twocoats) to give an Required shape and even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials and finishing smooth etc. complete. Rate are inclussive of Applying Two Coats of Lappy (Putty)

and One Coat of Primer on New Wall Surfaces to give an even shade including throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Rs. One Hundred Eighty & Paise

Putty of Dulux Paint Only and Primer shall be of BP White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Four Only

Sealer A 500 of Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of

Asian Paint or Dulux Interior A 900 of Dulux Paint Only.) etc. Complete for ALL FLOORS.

Finishing walls with Weather Proof Exterior Emulsion Paint on Wall Surfaces (Two Coats) over and above Applying one coat of Primer to give an Required

shape and even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials and finishing smooth etc. complete.

(Primer Shall be of Weather Coat Exterior Primer of Berger Paint India Ltd or Asian Paint Trucare Exterior Primer of Asian Paint or Exterior Sealer E 900 of Rs. One Hundred Ten & Paise Forty

Dulux Paint Only and Exterior Emulsion Paint shall be Weather Coat Smooth of Berger Paint India Ltd. or Apex Weather Proof Emulsion of Asian Paint or Only

Dulux Weather Shield Projects of Dulux Paint Only.)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the

9 surface of all dirt, dust and other foreign matter sand papering and stopping. 50.00 SMT 91.4 Rs. Ninety One & Paise Forty Only

Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including Rs. Sixty Seven & Paise Eighty Nine

10 cleaning the surface of all dirt, dust and other foreign matter. 330.00 SMT 67.89

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) Rs. Two Hundred Thirteen & Paise

11 including finishing with a floating coat of neat cement slurry at GROUND FLOOR. 3.00 SMT 213.17

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior plastering and finished even and smooth in C.M. 1:4 ( 1 Rs. Two Hundred Thirteen & Paise

12 cement : 4 sand ) including finishing with floating coat of neat cement slurry at GROUND FLOOR. 3.00 SMT 213.71

Seventy One Only

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 Rs. Three Hundred Seventeen &

13 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. 5.00 SMT 317.92

Paise Ninety Two Only

Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia. Complete with Special Flings, Compressor type Fittings

like G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance

including All Labour Charges etc. complete including making good the Ceilings, Floors and on terrace. Rain water pipe shall be 90 mm Dia. SWR horizontal Rs. Three Hundred Fourteen & Paise

pipe and vertical pipe and 90mm bend at the end near by Ground level. Rate are Inclusive of all Necessary Fittings required for ALL FLOORS. Fifty Two Only

Estimated Rate [Rs. Ps.] Amount

Item No. Description of Item Quantity Unit

In Figure In Words Rs.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Portable

Water of 20 mm. dia. nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc. Complete Rs. Two Hundred Six & Paise

Seventy Three Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Portable

Water of 25 mm. dia. nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc. Complete Rs. Two Hundred Fifty One & Paise

Thirty One Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Portable

Water of 40 mm. dia. nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc. Complete Rs. Four Hundred Forty Three &

Paise Twenty Nine Only

Providing and fixing 16 guage (1.52 mm) thick Safety perforated jali with welding on Existing M.S Grill also paint with approved brand 1 coat yellow zinc Rs. One Thousand Six Hundred

18 primer and 2 coat approved oil paint on all surface of jali and M.S patti Both side. 32.00 SMT. 1694.91 Ninety Four & Paise Ninety One

Providing and fixing 25 MM X 25 MM 14 guage (2.0 mm) thick Safety Crimp jali with welding 20mm x 5 mm M.S patti also paint with approved brand

coat yellow zinc primer and 2 coat approved oil paint on all surface of jali and M.S patti Both side. Rs. One Thousand Five Hundred

Fifty & Paise Thirteen Only

Providing , Fabricating and fixing M.S. GRILL / GATE of approved pattern fabricated from M.S. flat , square bars , round bars , C - channel , square / round

box pipe as per detail drawing . Rate is inclusive of welding with grinding and applying of mild steel putty with hardener into groove to have smooth surface

Rs. Seventy Five & Paise Twelve

20 two coats of oil paint and one coat of yellow zinc chromate primer coat of approved brand only . Oil paint shall be Luxol Enamel paint of Berger Paint india 2,760.00 Kg. 75.12

limited of Asian paint Apcolite premium gloss Enamel of Asian paint or Dulux premium gloss Enamel of Dulux paint and Nerolac synthetics of Nerolac

paint for all floor and at any height only .

TOTAL Civil Amount B-1

Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC

insulated FRLS wire for earth continuity in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected on/in Wall / slab ., 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G. G.I. metallic/PVC

company fabricated box with metal grove covered with appropriate front plate modules erected flushed with wall / ceiling with necessary modular lamp

21A 55.00 Point 425.00 Rs. Four Hundred Twenty Five Only

holder / modular ceiling rose / HD Connector for Open wiring. Light point. Cat.-II.(make and model approved by EIC and Matching colour with switch &

accessories). Length of point wiring must not increase than 10 mtr. For that necessary switch boards and their locations must be finalised before execution by

agency otherwise payment will not be done for extra long point. (For future extention, if required, agency has to erect one higher size metal box and modular

plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item)

For Bell Point Cat.-II

21B 1.00 Point 425.00 Rs. Four Hundred Twenty Five Only

21C For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type Electronic fan regulator both having ISI mark) Cat.-II 28.00 Point 612.00 Rs. Six Hundred Twelve Only

21D For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 3.00 Point 455.00 Rs. Four Hundred Fifty Five Only

21E For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) Cat.-II 5.00 Point 234.00 Rs. Two Hundred Thirty Four Only

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of following size complete erected with

22 necessary PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains with 100.00 Mtr. 24.00 Rs. Twenty Four Only

necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

Providing and erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA approved ISI mark medium class white colour 20 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in brick wall / slab along with continuous G. I. fish wire to draw mains

laid in approved manner with plastering by cement mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC insulated wire for

23A earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded 450.00 Mtr. 62.00 Rs. Sixty Two Only

conductor earthing as per standard colour code. (with 20/25 mm dia. PVC pipe)(Conductor resistance should be as per IS:8130/1984)

2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour

23B code. (with 20/25 mm dia. PVC pipe) (Conductor resistance should be as per IS:8130/1984) 40.00 Mtr. 82.00 Rs. Eighty Two Only

For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor earthing as per standard colour

23C code. (with 20/25 mm dia. PVC pipe) (Conductor resistance should be as per IS:8130/1984) 30.00 Mtr. 146.00 Rs. One Hundred Forty Six Only

Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. complete of

24 following sizes. 20.00 Mtr. 30.95 Rs. Thirty & Paise Ninety Five Only

Estimated Rate [Rs. Ps.] Amount

Item No. Description of Item Quantity Unit

In Figure In Words Rs.

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm

(green) copper PVC insulated FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected flushed in/on wall/slab along with continuous G.I. fish wire to draw wires and laid in approved manner

25 complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic / PVC / Acrylic box covered with appropriate 3.00 Point 678.00 Rs. Six Hundred Seventy Eight Only

front plate modules erected flushed with wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both

having ISI mark. Cat.-II. (Conductor resistance should be as per IS:8130/1984)

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology

earthing.Earthing electric rod must be made from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave rectangular

shape so its work as a terminal.The hot deep galvanising must be done after above process.Galvanised thickness must be minimum 75 micron any where. SS

Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrodewith inside Rs. Seven Thousand Twenty Five

26 conductive material minimum should be 26 kg. 2.00 Each 7025.00

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth and Cover should be heavy duty cast iron with required

size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to bring the earth resistance to at least

02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing must be done in the presence

of A.E. (GSPHCL)]

For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth pit (certificate for soil have to given by DEE / AE

27 along with photographs) 2.00 Each 276.00 Rs. Two Hundred Seventy Six Only

Providing and erecting following type of Modular Type Accessories mounted with 20 G company fabricated metalic box, single mounting base frame

28A covered with textured / metallic front plate, modules erected with necessary connection. As desired by Engineer in charge. TV Co-axial Socket outlet. Cat.-II. 1.00 Each 139.00 Rs. One Hundred Thirty Nine Only

28B Blank Plate Single, Cat.-II 20.00 Each 16.00 Rs. Sixteen Only

Providing and erecting modular type accessories mounted on 20G G.I. company fabricated galvanised metal box covered with approriate front plate modules

28C erected flushed with wall/Ceiling with 1 Nos. of 16 Amp SP indicator Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] Cat II. 1.00 Each 502.00 Rs. Five Hundred Two Only

Estimated Rate [Rs. Ps.] Amount

Item No. Description of Item Quantity Unit

In Figure In Words Rs.

Supplying and Erecting LED indoor fitting of approximately 4 feet long with LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use as

a heat sink shall be made from Aluminum extrusion having enough strength (sample must be approved by EIC) with polycarbonate diffuser with following

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

29 (J) Driver Efficiency: Min. 80% 42.00 Each 370.00 Rs. Three Hundred Seventy Only

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement Guarantee for complete Fixture) [Approval

will be given strictly subject to item specification]

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

30 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable 5.00 Each 111.00 Rs. One Hundred Eleven Only

Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 watt Lighting Fitting with electronic driver having THD < 15%, CRI>80,

P.F.0.95 And lumen output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency

31 >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg. 1.00 Each 780.00 Rs. Seven Hundred Eighty Only

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1)

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6)

Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should

be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per site Rs. One Thousand Nine Hundred

32 requirment, (15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to mechanical parts. 16.00 Each 1929.00

Twenty Nine Only

(Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM has to approved model as per tender specification and tested at ERDA)

(Necessary test reports should be submitted strictly at the time of approval. Sample approved by EIC subject to above specification only)

Supplying and erecting approved make Cabin fan of 230V. A.C. 50 Cy/s. 400 mm. sweep oscillating type complete erected with lead wires as Rs. One Thousand Five Hundred

33 directed.(Crompton Make High Flow model or make & other model approved by EIC) Cat II 12.00 Each 1527.00

Twenty Seven Only

Providing & erecting Fan clamp of 30x5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

34 10.00 Each 98.00 Rs. Ninety Eight Only

Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt complete erected on existing polished wooden block or in M.S. box with 3mm thick

35 white ISI mark laminated sheet. [Anchor (Chime model), vision, rider Make] 1.00 Each 170.00 Rs. One Hundred Seventy Only

Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant indian standards ammended upto date. Supplying and fixing

following way single phase MCB distrubution board of company fabricated with sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1

& 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Rs. Five Thousand Five Hundred

Cover for 240 Volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS Thirty Six Only

PVC insulated copper conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth

bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

Estimated Rate [Rs. Ps.] Amount

Item No. Description of Item Quantity Unit

In Figure In Words Rs.

For 16 Way MCBDB: Including MCB DP 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on 230 Volt

A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. & 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit level and finish the external

edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on box done with

red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on site as per requirement](MCBDB

Door,Back side & body of MCBDB must be made of 1.2mm thick CRCA sheet)

Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve) having 10 KA breaking capacity & confirms to IS:8828 with

37 same company metal box with earthing terminal having following capacity with necessary numbering/marking with oil Paint by painter. For 40 Amp. 2.00 Each 502.00 Rs. Five Hundred Two Only

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on existing 25 x 25 x 3 mm red oxide painted angle iron frame suitable for

fixing ICDP SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP/MCB Rs. Two Thousand Two Hundred

switch-busbar etc. as per Actual space available in electrical room at site) Eighty Nine Only

Providing, erecting, Fabricating the M.S. structure as per requirement of site as per structure design Including proper size approved by EIC of M.S. angles,

flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding, grinding and finishing duly painted with

39 Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint make with erection on site as per direction of engineer in 10.00 Kg. 77.00 Rs. Seventy Seven Only

charge with necessary grouting cementing, plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

Providing and erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

40 conforms to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control 30.00 Mtr. 91.00 Rs. Ninety One Only

wiring) with required size of copper lugs, nuts and bolts if required. For One wire 10.00 sq.mm.

Supplying and fixing radium sticker or Painting the number and words for inventory Identification on erected fittings / equipment’s or Such accessories

(MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or fade proof, weather proof, waterproof high

41 quality vinyl radium sticker for indoor / outdoor application as directed by engineer in charge. For one character 50 mm height.(The colour of sticker / paint 50.00 Each 2.00 Rs. Two Only

should be as per instruction given by EIC as per site requirement)

Dismantling the existing light, fan, bell, clock, independent plug point, wiring with mains of all types along with accessories etc. complete. Note:- Dismantled

42 80.00 Each 1.00 Rs. One Only

Materials to be handing over to dept.

43 Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or angle iron frame. 5.00 Each 7.00 Rs. Seven Only

44 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear. 25.00 Each 9.00 Rs. Nine Only

Supplying & erecting approved make low noise Decorative exhaust fan having size 150/200 mm with 1350 RPM with round / square frame ABS/metalic Rs. One Thousand Six Hundred

body with Grill / inbuilt lowers.(Make & model approved by EIC) Eighty Seven Only

TOTAL Electrical Amount B-2 (RS.)

Total Tender Amount (Civil + Elect.work ) i.e. (RS.)

Signature of contractor I/C Executive Engineer

G.S.Police Housing Corp.Ltd.