Spl Repair For Conversion Of LT OH Line To Underground Cable With Upgraded Size For Improvement Of LT Distribution System At SSE Under GE (A) Utility Jodhpur

Amount

Supply, laying and testing of cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, 1100 volts grade with stranded aluminium conductor of following sizes:- (a) 300 sq mm 3.5 core

All as per Srl Item No 01 above but 185 sq mm 3.5 core

All as per Srl Item No 01 above but 95 sq mm 3.5 core

All as per Srl Item No 01 above but 70 sq mm 3.5 core

All as per Srl Item No 01 above but 35 sq mm 3.5 core

All as per Srl Item No 01 above but 10 sq mm 4 core

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for sand cushioning to underground cable screened un-washed river sand including spreading, leveling and hand punning etc complete all as specified and as directed.

Supply and lay of un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soil complete all as specified and as directed.

Removing excavated material soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Dismantling of unserviceable ACSR conductor of any type and size from existing unserviceable poles at various location complete all as specified and as directed.

Dismantling of cross arms (Clamp, nut bolts ),care fully from site complete all as specified and as directed.

Dismantling of insulators any type any size from existing poles complete all as specified and as directed.

Taking out unserviceable LT cable of any type and size including required excavation, refilling, spreading and leveling complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical Plate No 3 of MES Sch. part I and testing on completion including necessary excavation and earthwork, expansive soil, adequate common salt, charcoal dust and funnel, PCC(1:3:6) type C-1 pit with precast RCC(1:1.5:3) type A-I cover, 40mm thick reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with funnel, wire mesh, with 20mm dia GI medium grade watering pipe earthing lead from earth plate to equipment earth point complete all as specified.

Supply and fix security light junction boxes of size 300 x 200 x 105mm, shock proof, rust proof, termite resistant, weather proof, cable entry from bottom, along with 3 phase 4 wire 100 amps almunium busbar with insulators and MCB SP of rating 6 amps complete pole mounted including fixing arrangements of suitable size all as specified and as directed.

Supply and fix cable path indicators made out of thick roughly hammer dressed stone slab size (30cm x 75cm x 7.5cm ) with applying two coats of paint, marking of voltage and size of cable, route including necessary earth work required complete all as specified and as directed.

Supply and fix copper cable 1100 volts grade PVC insulated and PVC sheathed wheather proof multistranded of size 3 Core x 1.5 sqmm complete all as specified and as directed.

M & L for rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows. Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, MS clamps for fixing with pole etc of size 20 mm dia complete all as directed.

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 1&4] (A) IN COMING (a) MCCB 4 Pole 415 Volts 16 KA 100 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 2] (A) IN COMING (a) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (c) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) MCCB 4 Pole 415 Volts 25 KA 125 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 3] (A) IN COMING (a) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (c) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 6] (A) IN COMING (a) MCCB 4 Pole 415 Volts 25 KA 250 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 5] (A) IN COMING (a) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 7] (A) IN COMING (a) MCCB 4 Pole 415 Volts 16 KA 100 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 32 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 8] (A) IN COMING (a) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 32 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 16 KA 40 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour mounted on porcelain insulators. The panel shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40 x 40 x 6 mm duly embedded in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as directed by Engr-in-charge and comprising of the following:- [ FP Box no 9 & 10] (A) IN COMING (a) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic release type(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No L&T/Siemens. (B) OUT GOING (a) MCB TPN 415 Volts 32 Amp rating -02 Nos

SHOBHIT BUILDERS

Sachiyay maa Electricals

Shri Electrical Enterprises

RISING ELECTRICALS

Inkhead Corporation

Shree Karni Construction

M/s Vishaka Enterprises