Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Sh. Immani Krishna Teja, AE (civil), AGE I R and D
AGE I R AND D MANALI PIN 175103 PH 01902255014
PERIODICAL SERVICES TO OTM/MD ACCN AND REPAIR TO DECORATIVE CEILING, WALL PANELING AND OTHER MISC WKS OF GUEST ROOMS OF OFFRS ROOM AT DGRE UNDER AGE (I) R n D MANALI
2026_MES_799005_1
AGE(I)/MNL/T-01/2026-27
Open Tender
Civil Works
Item Rate
180 days
DGRE MAnali
As per NIT and Tender Documents
5 documents required · 5 mandatory
₹500
AGE (I) R and D Manali
₹30,000
Yes
16 Nov 2026
16 Nov 2026
14 Dec 2026
16 Nov 2026
7 Dec 2026
30 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismentling unframed timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-Charge. | 200 | RM | - | - |
| 2 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 3 Sqcm and not Exc 6 Sqcm, but bullnosed, splayed,chamfered or rounded on one edge or face, complete all as specified and as directed by Engineer-in-Charge. | 100 | RM | - | - |
| 3 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 13 and not Exc 25 Sqcm, complete all as specified and as directed by Engineer-in-Charge. | 100 | RM | - | - |
| 4 | M & L for preparing new or previously untreated of wooden and applying two coats of synthetic enamel paint over incl a coat of red oxide over 10 cm in width or girth, complete all as specified and as directed by Engineer-in-Charge. | 26 | Sqm | - | - |
| 5 | M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls, complete all as specified and directed by Engr-in-Charge. Note:-( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition) | 90 | Sqm | - | - |
| 6 | Dismantling wall and ceiling board,of any description and incl old batterens, complete all as specified and as directed by Engineer-in-Charge. | 365 | Sqm | - | - |
| 7 | Providing & fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process, complete all as specified and as directed by Engineer-in-Charge. | 75 | Sqm | - | - |
| 8 | S & F hollow PVC panel joint type (with core, tongue) of 4 to 6 mm thick termite resistance, in approved colour golssy finish fixed with screws and incl battern for fame 300 to 500 C/C. Nails or adhesive on wooden/PVC /metal battens fixed on wall/ceiling and suitable fillets , complete all as specified and directed by Engr-in-Charge. | 200 | Sqm | - | - |
| 9 | Dismantling 15 mm to 40 mm nominal bore G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead, complete all as specified and as directed by Engineer-in-Charge. | 90 | RM | - | - |
| 10 | S&F in repairs 3 layer PP-R (Poly propylene Random copolymer) pipes of PN - 16 Pipe, 20mm OD (SDR-7.4) confirming to IS:15801 , UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints, concealed work, complete all as specified and as directed by Engineer-in-Charge. | 45 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
BOQ_896384.xls
BOQ • 0.48 MB
TenderDocumentsT012627BR.pdf
Tender Documents • 1.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .