Repairs to pump sets and motor of different capacities and replacement of starters at Kannur under AGE (I) CANNANORE.

Amount

Strip opening of submersible motor of capacity 3HP, 3 phase, 415V complete cut opening and removing the stator winding, cleaning of slots thoroughly, rewinding the stater with special water resistant insulated high quality proper gauge super enameled copper winding wire including replacement of water seal and auxiliary coil and all worn out parts and reassembling complete all as to match with original manufacturer and lowering the pump set into existing tube well with delivery pipe line , connecting up electric/water line, testing and commissioning all as specified and directed.

Strip opening of submersible motor of capacity 5HP, 3 phase, 415V complete cut opening and removing the stator winding, cleaning of slots thoroughly, rewinding the stater with special water resistant insulated high quality proper gauge super enameled copper winding wire including replacement of water seal and auxiliary coil and all worn out parts and reassembling complete all as to match with original manufacturer and lowering the pump set into existing open well with delivery pipe line , connecting up electric/water line, testing and commissioning all as specified and directed.

Strip opening of submersible motor of capacity 10HP, 3 phase, 415V complete cut opening and removing the stator winding, cleaning of slots thoroughly, rewinding the stater with special water resistant insulated high quality proper gauge super enameled copper winding wire including replacement of water seal and auxiliary coil and all worn out parts and reassembling complete all as to match with original manufacturer and lowering the pump set into existing open well with delivery pipe line , connecting up electric/water line, testing and commissioning all as specified and directed.

Supply and connecting with copper conductor cable Flat type, multi stranded of size 10 sqmm 3 core of Make : L&T Cat No : WS00100PECM or equivallent in Havells/polycab/KEI, including taking down old unserviceable cable, complete all as specified and as directed.

Supply and connecting with copper conductor cable Flat type, multi stranded of size 6 sqmm 3 core of Make : L&T Cat No : WS00060PECM or equivallent in Havells/polycab/KEI, including taking down old unserviceable cable, complete all as specified and as directed.

Supply and connecting with copper conductor cable Flat type, multi stranded of size 4 sqmm 3 core of Make : L&T Cat No : WS00040PECM or equivallent in Havells/polycab/KEI, including taking down old unserviceable cable, complete all as specified and as directed.

Disconnecting and taking down from wall/panel board keeping aside for disposal unserviceable DOL starter and Supply and connecting DOL starter 3 phase 440 volts upto 4 HP of make L&T Cat No : SS96210POTO or equivalent l, complete, all as directed.

Disconnecting and taking down from wall/panel board keeping aside for disposal unserviceable star delta starter and Suppy and fixing Electronic Star Delta starters of Male : L&T Cat No : SS96255COTO or equivalent up to 6 HP 3 Phase SASD and electrically connected complete all as specified and directed.

Disconnecting and taking down from wall/panel board keeping aside for disposal unserviceable starter and Suppy and fixing Electronic DOL Submersible pump controllers of Male : L&T Cat No : SS95983DOTO or equivalent 3 HP, 3 Phase with inbuilt WLC & Single phase preventer relay and electrically connected complete all as specified and directed

Disconnecting and taking down from wall/panel board keeping aside for disposal unserviceable starter and Suppy and fixing Electronic DOL Submersible pump controllers of Male : L&T Cat No : SS95983DOVO or equivalent upto 5/6 HP 3 Phase with in built WLC & Single phase preventer relay and electrically connected complete all as specified and directed

Disconnecting and taking down from wall/panel board keeping aside for disposal unserviceable starter and Suppy and fixing Electronic Star Delta Submersible pump controllers of Male : L&T Cat No : SS95984DOAO or equivalent 10 HP 3 Phase FASD with Single phase preventer and relay 9 - 14 Amps and electrically connected complete all as specified and directed

Supplying and replacement of synthetic Rubber insulated mats 20mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete, all as specified and directed.

Supplying & fixing in replacement Cast iron foot valve 40/50 mm bore flanged and drilled type of Make: KIRLOSKAR/BIR/BVI/BV including nuts bolts, gasket and jointing materials, SR 16 , IS-4038 marked, complete, all as specified and directed.

Supply & Fixing change over switch on load type 100A, 4 pole , 3phase, 415 V , side operated with enclosure conforming to IS-13947 (Part I& II) mounted on wall , hooked in existing panel board and connecting up electrically through suitable lugs, testing and commissioning including taking down unserviceable change over switch all as specified and directed.

Supply & Fixing change over switch on load type 125A, 4 pole , 3phase, 415 V , side operated with enclosure conforming to IS-13947 (Part I& II) mounted on wall , hooked in existing panel board and connecting up electrically through suitable lugs, testing and commissioning including taking down unserviceable change over switch all as specified and directed.

Supply only chlorine disinfectant for superior quality for mixing with water treatment complete all as specified and directed (Make : Chemtex, Sarrah and sons, Safe chlor or equivalaent)

Strip opening of centrifugal pump motor assembly of capacity 5HP, 3 phase, 415V and Carrying out rewinding and overhauling of motor assembly after cutting burnt winding wire, cleaning of core slots and re- winding by using super enameled copper winding wire of appropriate gauge and turn as per existing incl providing all insulation materials & varnishing heating, replacement of worn out bearing bushing, bolts/nuts/washers etc incl lubrication, and assembling the complete motor assembly, testing and commissioning all as specified and directed. NOTE :- Replacement of Gland Packing, Impeller, Pump shaft , Tyre coupling etc shall be measured and paid separately under relevant tems.

Supply only Gland Packing of any size

Supply only Impeller for upto 5 HP Pump.

Supply only Pump shaft with nut for capacity upto 5 HP Pump.

Supply only Tyre coupling set for capacity upto 5 HP Pumping Set

Assembling/coupling of pump & motor of capacity upto 5 HP, transporting to Pump House and including installation, connection of electrical & water line & testing on load after proper alignment over the foundation to the entire satisfaction of Engineer - in - Charge.

T.P.SUNIL KUMAR

Sreekrupa Enterprises

JEETH CONSTRUCTION