SPL REPAIRS TO BLDG NO T 01 WALL PANELLING,

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site. Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames). Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints. Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class hard wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated. Complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats. Complete all as specified and directed by Engineer-In-Charge.

S&F MS cold rolled Butt hinges medium weight 100 mm long Complete all as specified and directed by Engineer-In-Charge.

S&F MS Cold rolled Butt hinges medium weight 75 mm long Complete all as specified and directed by Engineer-In-Charge.

S&F 300 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed.

S&F 300 mm size mild steel ordinary rat tail rail rod pattern springs including roller and roller plate complete.

S&F mild steel barrel tower bolts, 200 mm long ISI marked stove enamelled block with bright bolt and fixed Complete all as specified and directed by Engineer-In-Charge.

S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size Complete all as specified and directed by Engineer-In-Charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long Complete all as specified and directed by Engineer-In-Charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete. Complete all as specified and directed by Engineer-In-Charge.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple. Complete all as specified and directed by Engineer-In-Charge.

Hacking out old broken glass from wooden/metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones Complete all as specified and directed by Engineer-In-Charge.

M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames.

All as per srl item No 16 above but pin head type, figured glass. Complete all as specified and directed by Engineer-In-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets Complete all as specified and directed by Engineer-In-Charge.

M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. Complete all as specified and directed by Engineer-In-Charge.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sqcm and not exceeding 13 Sq. cm Complete all as specified and directed by Engineer-In-Charge.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints. Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No 25 above but except boarding.

S & F 2nd Class softwood boarding in floor and skirting 40mm thick planed one side with but joint & fixed with nails.for repairs to existing floor in patchs etc. Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No 27 above but except boarding fixed with nails.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, Complete all as specified and directed by Engineer-In-Charge.

M&L for 2nd Class soft wood (Kail) as in scantling, clean swan timber framed and fixed, Complete all as specified and directed by Engineer-In-Charge.

All as per srl item No 30 above but except timber.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering. Complete all as specified and directed by Engineer-In-Charge.

S&F 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs,walls etc with grade of zinc coating 275 grams per square metre. Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No.33 above but except sheeting.

S&F 0.80 mm thick plain , galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) with grade of zinc coating 275 grams per square metre. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint Complete all as specified and directed by Engineer-In-Charge. Note :-(a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%).(b) The surface of plain steel sheeting as in ridge, hips, velley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on old plastered or un-plastered surface of walls. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old, undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint, Complete all as specified and directed by Engineer-In-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). Complete all as specified and directed by Engineer-In-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. Complete all as specified and directed by Engineer-In-Charge.

M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5 graded aggregate) as in floors finished even and fair. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75 mm thick cement concrete of 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base Complete all as specified and directed by Engineer-In-Charge.

M&L for non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors set and jointed over cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete. Complete all as specified and directed by Engineer-In-Charge.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 15mm thick cement sand screed bed (1:4). Complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

M&L for machine cut kota stone slab flooring 20 - 25mm thick over 15mm cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to the match the shade of the slab including rubbing and polishing. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs vitreous china wash down closet pan (Pedestal pattern) including seat cover and fixing to trap including connection to drain (or out going pipe), flusing pipe, anti syphonage pipe fixxing bolts but excluding flushing cistern. Complete all as specified and directed by Engineer-In-Charge.

S & F in repair PVC low level flushing cistern of 10 ltrs. capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle. Complete all as specified and directed by Engineer-In-Charge.

S&F vitreous China wash hand basin , white, flat back size 630 x 450m m excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair Complete all as specified and directed by Engineer-In-Charge.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality. Complete all as specified and directed by Engineer-In-Charge.

S & F in repair 15 mm bore angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed by Engineer-In-Charge.

S&F central hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair Complete all as specified and directed by Engineer-In-Charge.

S&F in repair 15 mm dia bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. Complete all as specified and directed by Engineer-In-Charge.

S&F corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair CP soap tray fixed to walls with rubber plugs. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms). Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, laying of cables etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil. Complete all as specified and directed by Engineer-In-Charge.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm. Complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation, filling and mass concrete. Complete all as specified and directed by Engineer-In-Charge.

M & L for 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc Complete all as specified and directed by Engineer-In-Charge.

Demolition of brick work of any type built in cement mortor in foul condition etc Complete all as specified and directed by Engineer-In-Charge.

M&L for brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. Complete all as specified and directed by Engineer-In-Charge.

M&L for roundening to the edge of stone slabs on edge such as cooking plateform. Complete all as specified and directed by Engineer-In-Charge.

M&L for providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories. Complete all as specified and directed by Engineer-In-Charge.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars. Complete all as specified and directed by Engineer-In-Charge.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia. Complete all as specified and directed by Engineer-In-Charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-2 concret bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia ( internal) after these are laid in trenches. Complete all as specified and directed by Engineer-In-Charge.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round of 3/4 section) in cement conc. 1:2:4 type B-1 smooth finished and reforming benching as required internal dia of pipe 150mm. Complete all as specified and directed by Engineer-In-Charge.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc. Complete all as specified and directed by Engineer-In-Charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete. Complete all as specified and directed by Engineer-In-Charge.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete. Complete all as specified and directed by Engineer-In-Charge.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc complete. Complete all as specified and directed by Engineer-In-Charge.

S&F 75 mm bore PVC (SWR) Bends. Complete all as specified and directed by Engineer-In-Charge.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal. Complete all as specified and directed by Engineer-In-Charge.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal. Complete all as specified and directed by Engineer-In-Charge.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement. Complete all as specified and directed by Engineer-In-Charge.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store/for Sch of credit etc. Complete all as specified and directed by Engineer-In-Charge.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store/Sch of credit etc. Complete all as specified and directed by Engineer-In-Charge.

S&F 3 layer PP-R pipes 25mm dia bore SDR 7.4 & SDR 11 UV stablished and antimiccrobial welded having thermal stability for hotand cold water for fixing inlet, oulet and over flow pipe and provision of wash out pipe etc Complete all as specified and directed by Engineer-In-Charge.

S&F 3 layer PP-R pipes 32mm dia bore SDR 7.4 & SDR 11 UV stablished and antimiccrobial welded having thermal stability for hotand cold waterfor fixing inlet, oulet and over flow pipe and provision of wash out pipe etc. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete. Complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe. Complete all as specified and directed by Engineer-In-Charge.

M&L for 100mm thick Cement Concrete Type D2 1:4:8 (using 40 mm graded aggregate) mass concrete in flooring. Complete all as specified and directed by Engineer-In-Charge.

M&L for 50 mm thick cement concrete type B 1, 1:2:4 (using 20 mm graded aggregate) as in flooring and finishing cement concrete surface even and smooth using extra cement etc. Complete all as specified and directed by Engineer-In-Charge.

S&F glass dividing strips, 3 mm thick and width of strip of 28mm. Complete all as specified and directed by Engineer-In-Charge.

M&L for providing plain cement concrete 1:3:6 type, C-2, 50mm thick using 20 mm graded stone aggregate as in plinth protection/path finishing the surface even and smooth without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exceeding 3 sqcm and N.exc 6 sqcm. Complete all as specified and directed by Engineer-In-Charge.

M&L for applying two coats of cement base paint on new plastered surfaces on walls including preparation of new surfaces. Complete all as specified and directed by Engineer-In-Charge.

M&L for applying one coat of white washing on ceiling on old plastered surfaces on walls including preparation of old surfaces. Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, Complete all as specified and directed by Engineer-In-Charge.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications. Complete all as specified and directed by Engineer-In-Charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-In-Charge.

S&F aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, sub base and mass concrete Complete all as specified and directed by Engineer-In-Charge.

M&L for sand filling under interlocking tiles 25mm thick including watering and consolidating. Complete all as specified and directed by Engineer-In-Charge.

M&L for 60 mm thick machine pressed precast concrete interlocking tiles any shape, size, colour/pattern(as approved) confirming to IS 15658-2006 of M-40 Grade. Complete all as specified and directed by Engineer-In-Charge.

Septic tank exc in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users. Complete all as specified and directed by Engineer-In-Charge.

Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in 1:4 cm, RCC cover slab in M-25/RR masonary /filling with brick bats, complete of size 2.40 m dia x 3.00 m deep. Complete all as specified and directed by Engineer-In-Charge.

M&L for for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth complete using WPC. Complete all as specified and directed by Engineer-In-Charge. Note: WPC shall be measured and paid seprately.

Supply only integral water proofing compound. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc. Complete all as specified and directed by Engineer-In-Charge.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc Complete all as specified and directed by Engineer-In-Charge.

S&F mild steel TMT bars 8 mm dia, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia. Complete all as specified and directed by Engineer-In-Charge.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. Complete all as specified and directed by Engineer-In-Charge. For:- a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way.

All as per sr no. 122 above but one 3 pin 5 Amp switch socket outlet on independent board.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair modular switch , single pole, one way 6 amp 240 volts, complete all as specified and as directed. Make: Anchor / Bajaj / Cona Note : Taking down of swithches included in taking down point wiring

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed. Make: Anchor / Bajaj / Cona Note : Taking down of swithches included in taking down point wiring

S&F in repair Modular switch socket combination multi-purpose 3/5 pin, 6/16 amp combined 240 volts, Complete all as specified and directed by Engineer-In-Charge.

S&F in repair Switch socket combination flush type multipurpose 3/5 pin suitable for 15 Amp,Complete all as specified and directed by Engineer-In-Charge.

S&F in repair Switch socket combination flush type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch along with box, Complete all as specified and directed by Engineer-In-Charge.

S&F in repair Modular switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 63A MCCB 415V, 16 KA, 4 Pole along with suitable enclosure Distribution Board, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Distribution Board, SPN 12 Way, Double door Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Distribution Board, SPN 8 Way, Single door Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Distribution Board, SPN 4 Way, single door Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs MCB SP 6 to 32 Amps, 240 Volts, Gold plus MCB B Series. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs MCB DP 40 Amps, 240 Volts, Gold plus MCB B Series. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs MCB SPN 6 to 32 Amps, 240 Volts, Gold plus MCB B Series. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs LED Lamp 15 W. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Linnet LED mirror light 2 feet, reflection without shadow 7 watt Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Bulkhead luminaire comprising of high brightness LEDs 10W LED, IP-65 Complete all as specified and directed by Engineer-In-Charge.

S&F decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish suitable for 14 W retrofit. Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing surface and wall mounted led tube light fitting 18/20W, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including connection from ceiling rose to tube light with suitable size of flexible cable. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs metallic ventil Air-DS exhaust fan of size 230 mm sweep, Complete all as specified and directed by Engineer-In-Charge.

M&L for Sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC casing capping of required size with accessories along with 1 run of 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring Complete all as specified and directed by Engineer-In-Charge. Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC casing caping will be measured as one length.

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note :The rate is inclusive of necessary earth work, RFR and removal etc

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core. Complete all as specified and directed by Engineer-In-Charge.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note: The punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection Complete all as specified and directed by Engineer-In-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core. Complete all as specified and directed by Engineer-In-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core. Complete all as specified and directed by Engineer-In-Charge.

M/s Riyaz Enterprises

M/S ALI MOHAMMAD GASSI

SOFI CONSTRUCTIONS

M/S ABDUL MAJID LONE

M/S GHULAM NABI LONE AND BROS