Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹22.2 LAWARDED | AWARDED |
Tender Value
₹40.6 L
EMD Value
₹82,000
Closing Date
17 Mar 2025, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Re-conditioning, Operation & maintenance of Streetlights at Nandikoor, Miyar & EPIP 1st Phase Industrial Area, Mangaluru District (2nd Call)
KIADB/2024-25/EL/WORK_INDENT183/CALL-2
KIADB/2024-25/EL/WORK_INDENT183/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
₹1,020
₹82,000
6 Mar 2025
6 Mar 2025
19 Mar 2025
10 Mar 2025
Re-conditioning, Operation & maintenance of Streetlights at Nandikoor, Miyar & EPIP 1st Phase Industrial Area, Mangaluru District
Supplying & fixing LED Drivers suitable for 5700K LED fitting Outdoor Fixtures. Operating voltage range from 180V to 265V, 50HzAC power Supply 120W 5700K suitable for outdoor LED fitting Complete with...
Supply & installation of CCMS-10KVA, Rated Input voltage, 240 Volts & 415V AC, 50Hz, KVA Rating upto 10KVA, Current rating - 12A/24A/32A (Single & Three phase), connection single three phase-2 wire /4...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63 Amps.
with all lead and lifts as per specification and direction of Engin...
Supplying Heavy Duty Copper Terminal Long Barrels 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying and fixing microprocessor based electronic timer (without contactor, Din mounting using necessary bots, nuts, and washer etc.,) 3-120 Sec with all lead and lifts as per specification and di...
Supplying and fixing 4 pole power contactor with NO/NC contracts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947.40 Amp...
Supplying and fixing miniature circuit breakers/Isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit b...
Supply of LED Streetlight luminaries with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyc...
Fixing Halogen/metal hallide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. with all lead and lifts as per specif...
Fabricating supplying and mounting MS box made out 18 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing angle frame work fabricated out of M.S. Angle iron and M.S. flat with bolts, washers ec., and painted with 2 coats of red oxide and then 2 coats of approve paint.a) 40 x 40 x 6 m...
Supplying Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing Epoxy Terminating Kit (Pothead) suitable
for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. with all lead and lifts as p...
Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeves, mounted on phenolic /FRP/DMC insulator wh...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment son the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit. The pit should b...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm
with all lead and lifts as per specifica...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .